jasjeet Posted September 17, 2009 Share Posted September 17, 2009 I used the USB to install SL, i have a working install, perfect, Audio, LAN, and Graphics. Now i want to use the actual drive to boot from (Internal HDD). So i used the same method as i used to make the USB bootable, using chameleon files. I boot from the drive, i was surprised it worked, but when i get to the desktop, in around 10 seconds i get a Kernal Panic, and i cant make out whats causing it, even in safe mode. However booting from the USB works perfect. I have copied the kexts from the Extra folder to the Extra folder on my SL partition, this stopped the APCI_SMC_Platform Plugin error. But now KP at dekstop, unless i use the USB to boot. What am i missing? **EDIT** Its fixed by using -cpus=1 command. Will this hurt performance? Link to comment Share on other sites More sharing options...
AzN_DJ Posted September 20, 2009 Share Posted September 20, 2009 Try add the kexts and .plists from your usb into the EFI partition howto - in Terminal: >sudo -s (enter password) mkdir /Volumes/EFI mount_hfs /dev/diskXs1 /Volumes/EFI (/dev/diskXs1 depends on where the installation is, and what drive. for me, I only have one hard drive so it is disk0s1. a df can show you what it is if you are unsure) Then you can go into finder and copy the files from your usb to EFI/Extra/Extensions After you are done, go back into terminal: umount /Volumes/EFI killall Finder (otherwise it will mount every time you boot) Link to comment Share on other sites More sharing options...
Recommended Posts