OSX on HP ProBook

[trekkim]

Hi can you sent or write topic which kind of drivers from distro you use, i'm trying install all dirto and nothings good :-(((

 

thanks

 

Hi

 

I have HP ProBook 4510s. I've installed iDeneb v1.5 and all work fine, except video and Lan.

 

Now I've installed Snow Leopard (10.6.2) on it. no video/lan/wifi. I need wifi to be work, as I can't work without internet...

 

please help...

[vedder]

I cant install it, "still waiting for root device", I've change it TO AHCI bak to IDE, still no luck.. any suggestion?

[pomket]

any news with Snow Leopard and hp proboook 4510s?

[robertandri]

any news with Snow Leopard and hp proboook 4510s?

I have this laptop and downloaded the hazard 10.6.6 and instaled but no wifi no ethernet you can't turn the microphone of just headphones are ok...and no video driver ... I used an dstd aml file with the original drivers and got the card to enable resolutions but the display is garbled and it freezes after a minute or so... someone tryed the lion kext on this distribution and the drivers worked on an external monitor on the vga output... but not the main display...

[krytikal]

hello i have 4710s probook

i installed snow leopard retail and combo update 10.6.8

if you want try this :

-download [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] and [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]( google is your friend ) .

-burn [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] to cd ,

- put [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] and your dsdt.aml to a usb pendrive

- boot to optical drive ( before insert [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] cd)

-after [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] charged eject [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] cd

-insert snowleopard 10.6.2 cd then press F5 after 5 sec you can see snow intall cd go to it and tape "-x" press enter

format,instal ....

-after installation , re insert ibootcd boot to optical drive , boot to optical drive choose your partition where snow are intalled tape "-x" and enter

-configure your installation

now you have macos 10.6.2 retail

-put [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url].zip and dsdt.aml to your desktop

-extract [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]

-open folder of [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] then click to [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] . dont intall [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] and dont close [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] , just open

now open combo update 10.6.8 and run it at the end of installation macos talk to you to reboot , don't clik "reboot" !!!

run [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] ( open before) and choose dsdt.aml user ,osx application and voodoops2

when done you can reboot

eject your [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] cd from optical drive

boot to your hardrive and wait ,...., now you have 10.6.8 retail installation

[leon321]

Hello

I have the same PC ProBook 4710s with ATI MobilityRadeon HD 4330

Intel core duo T6570.

I upgraded BIOS up to F 17 like you I suppose

So I tried to apply your above method.

 

First try

As I dont have 10.6.2, I started from 10.6.0 and

applied combo 10.6.2

removed .Applesetupdone

and reboot

So I must be in the right condition to apply [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] and Combo update to 10.6.8.

 

This is what I tried several times without success.

DSDT is coming from

http://www.insanelym...0s&fromsearch=1

post 5 by MalDon

I also added device ID :95521002 in ATI4600Controller.kext

 

Applying your method gives me a KP relative to

AppleIntelCPUPowerManagement.kext at first boot without [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]

So I do it again and add this through [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url].

Now I don't have KP but I stay stuck with message

IOAPIC : Version 0x20 Vectors 64 :87

PS2 Controller : created dev /ps2controller

Using IRQ layout 0,1

 

Second batch tryed

I found 10.6.2

But this refuse to install if you don't already have Leopard installed !

What a mess !

Any idea ?

 

Leon