random kernel crashes after 10.5.7

[Timski]

hi there peeps,

after having a beautiful 10.5.6 IPC installer voodoo 9.5 kernel and everything i threw at it worked i was happy then comes the update 10.5.7 thought that i would leave it a while then update did that using zep's updater tool and re-patched it for AMD as you do .. all seemed fine then i started to get crashes on aperture and adium especially adium

i have attached a photo of the dump if anyone can shed some light on the issue that would be ace

i did back up all the extensions before using the osx86 tools utility

 

:-)

 

right i also have another one now from aperture here is the photo again

i have tried reinstalling my Graphic card using the EFI Studio tool that cam with teh IPC 10.5.6 V5 Full Distro thats what i used to install the graphics in the 1st instance

 

thanks

:-)

 

yet another one on this time with imedia same details looks like anything that needs to use the GFX and it dies

[Giorgio_multi]

hi there peeps,

after having a beautiful 10.5.6 IPC installer voodoo 9.5 kernel and everything i threw at it worked i was happy then comes the update 10.5.7 thought that i would leave it a while then update did that using zep's updater tool and re-patched it for AMD as you do .. all seemed fine then i started to get crashes on aperture and adium especially adium

i have attached a photo of the dump if anyone can shed some light on the issue that would be ace

i did back up all the extensions before using the osx86 tools utility

 

:-)

 

right i also have another one now from aperture here is the photo again

i have tried reinstalling my Graphic card using the EFI Studio tool that cam with teh IPC 10.5.6 V5 Full Distro thats what i used to install the graphics in the 1st instance

 

thanks

:-)

 

yet another one on this time with imedia same details looks like anything that needs to use the GFX and it dies

 

You can try to install NVDAResman.kext from IPC 10.5.6 installation (IPC DVD)

 

Giorgio

[Timski]

You can try to install NVDAResman.kext from IPC 10.5.6 installation (IPC DVD)

 

Giorgio

 

ok tried that inserted IPC 10.5.6 used pacifist to install the NVDAResman.kext

rebooted the system and it froze on the boot... used the -V option on boot and no errors it just froze on me tried with -X to get to safe mode samething just froze on me (right now i am restoring using timemachine)

 

i am going to try an experiment and see if i can get IPC 10.5.6 installed with out the GFX then install the Patched AMD combo update 10.5.7 that i have then the GFX and few apps that crash it like aperture adium and see if that makes a working result. I would ideally like not have to do a complete reinstall, but use the image i have on the Timemachine disk and then update and repair that issue if i can do you have any other ideas on the fix for this one

 

thanks

 

:-)

[Timski]

right then tried the experiment and got the dump again here is the what the dump said this is the same one i always get now after the 10.5.7 update i hope this helps a bit

 

:-)

 

panic(cpu 0 caller 0x0042DAAE): "IOGMD: notwired for the IODMACommans""/VoodooKernel/xnu-1228.7.58/iokit/Kernel/IOMemoryDescriptor .cpp:1305

Debugger called <panic>

Backtrace (cpu 0), Frame : Return Address(4 potential args on stack)

0x46e1e3e8 : 0x12b08c (0x45bcf0 0x46e1e41c 0x133119 0x0)

0x46e1e438 : 0x42daae (0x4a13c0 0x4 0x46e1e468 0x3ee2df)

0x46e1e4b8 : 0x42dd2a (0x78b0f80 8x3 0x46e1e4d0 0x80)

0x46e1e568 : 0x42d734 (0x78b0f80 0x75c0 0x46e1e5ac 0x0)

0x46e1e5c8 : 0x478fcb5 (0x78b0f80 0x75c0 0x69efe00 0x1c0)

0x46e1eae8 : 0x47455c60 (0x349b2000 0x607d384 0x0 0x0)

0x45e1eb38 : 0x43f2b4 (0x34a77000 0x607d384 0x18 0x0)

0x46e1eb88 : 0x44025f (0x474bc8e0 0x34a770000 0x607d380 0x0)

0x46e1ebe8 : 0x46de92 (0x34a77000 0xc 0x46e1ec30 0x0)

0x46e1ed09 : 0x18d844 (0x34a77000 0xc 0x607d380 0x0)

0x46e1fdc8 : 0x12d110 (0x607d358 0x4dd15a0 0x0 0x0)

0x46e1fe08 : 0x1261e8 (0x607d300 0x0 0x6c 0x46e1fee4)

0x64e1ff08 : 0x19732e (0x46e1ff44 0x0 0x0 0x0)

0x46e1ffc8 : 0x19f9df (0x4b775f0 0x1 0x1a20b5 0x4b775f0)

No mapping exists for frame pointer

Backtrace terminated-invalid frame pointer 0xb052fab8

Kernel loadable modules in backtrace (with dependencies):

com.apple.GeForce(5.4.4)@0x47457000->0x474cefff

dependency: com.apple.NVDARRasman(5.4.4)@0x62faa000

dependency: com.apple.iokit.IONDRVSupport(1.7.3)@0x41352000

dependency: com.apple.iokit.IOCIFamily(2.6)@0x4143d000

dependency: com.apple.IOGraphicsFamily(1.7.3)@0x41335000

 

BSD process name corresponding to current thread: Aperture

 

Mac Os Version:

9J61

 

Kernel Version:

Darwin Kernel Version 9.5.0 sat dec 6 19:39:54 IST 2008; Voodoo; Release 1.0 :xnu-1228.7.58/BUILD/obj/RELEASE_I386

System model name: To be filled in by O.E.M

[OliverHK852]

I'm having the exact same problem after updating to 10.5.7, but with different hardware. What graphics card are you using? Have you managed to come to any stable results? I've been trying to find an answer for months! Like you said, anything that uses a certain graphics call, it's just panicking. I've had trouble with Adium, Candybar, Pixelmator, Coda, Mail Badger, EventBox, Bento, and a few more. I'm using a PNY GeForce 6200, any ideas?

[ddd_]

I'm having the exact same problem after updating to 10.5.7, but with different hardware. What graphics card are you using? Have you managed to come to any stable results? I've been trying to find an answer for months! Like you said, anything that uses a certain graphics call, it's just panicking. I've had trouble with Adium, Candybar, Pixelmator, Coda, Mail Badger, EventBox, Bento, and a few more. I'm using a PNY GeForce 6200, any ideas?

I too have a PNY 6200 and the same problem. I tryed iDeneb and iATKOS with Natit/NVKush and the voodoo kernel. I would stay with 10.5.6 but as you know some sw needs 10.5.7

[Timski]

I'm having the exact same problem after updating to 10.5.7, but with different hardware. What graphics card are you using? Have you managed to come to any stable results? I've been trying to find an answer for months! Like you said, anything that uses a certain graphics call, it's just panicking. I've had trouble with Adium, Candybar, Pixelmator, Coda, Mail Badger, EventBox, Bento, and a few more. I'm using a PNY GeForce 6200, any ideas?

 

yeah i am using a GF6200 AGP

 

yeah i am using a GF6200 AGP

 

right i have just got the ikats 10.5.7 going to try that i have noticed however that there are no apps to choose on the install i will keep you posted on the results

[Greco Rubio]

Same problem, have a GF 6200 AGP, I tried with NATIT, NVEnabler and EFI Strings and still have the same issue.

 

Also tried switching the kernel to Voodoo 9.5/9.7, Qoopz 9.7 and nothing.

 

I'll try to change my video card to see if it solve this problem.

[Timski]

yeah i am using a GF6200 AGP

 

 

 

right i have just got the ikats 10.5.7 going to try that i have noticed however that there are no apps to choose on the install i will keep you posted on the results

 

tried that and no success on my HACK ;-( *sobs*

still went back to the IPC 10.5.6 and updated and applied the EFI for my card still getting issues with anything that needs GFX

[Timski]

hi there peeps,

after having a beautiful 10.5.6 IPC installer voodoo 9.5 kernel and everything i threw at it worked i was happy then comes the update 10.5.7 thought that i would leave it a while then update did that using zep's updater tool and re-patched it for AMD as you do .. all seemed fine then i started to get crashes on aperture and adium especially adium

i have attached a photo of the dump if anyone can shed some light on the issue that would be ace

i did back up all the extensions before using the osx86 tools utility

 

:-)

 

right i also have another one now from aperture here is the photo again

i have tried reinstalling my Graphic card using the EFI Studio tool that cam with teh IPC 10.5.6 V5 Full Distro thats what i used to install the graphics in the 1st instance

 

thanks

:-)

 

yet another one on this time with imedia same details looks like anything that needs to use the GFX and it dies

 

 

[ FIXED IT ]

 

at last i have fixed it noticed the other day that there was a new update 10.5.8 did the ususal...

backed up kexts and did a time machine back up just incase

got the combo update and patched with zep's tool... ran updated applied the seatbelt from 10.5.5 because i have kernel 9.5 you need the 10.5.6 one if you have kernel 9.6 to find out which one you have fire up terminal then type in uname -r and you will get the number there...

installed the correct seatbelt as you do rebooted and about TIME...

 

every thing worked again PHEW!!!! just in time i needed to do some work

 

get the seatbelts from here

 

http://www.insanelymac.com/forum/index.php?showtopic=148566

 

:-)

 

hope that helps you people as much as it helped me

[OliverHK852]

[ FIXED IT ]

 

at last i have fixed it noticed the other day that there was a new update 10.5.8 did the ususal...

backed up kexts and did a time machine back up just incase

got the combo update and patched with zep's tool... ran updated applied the seatbelt from 10.5.5 because i have kernel 9.5 you need the 10.5.6 one if you have kernel 9.6 to find out which one you have fire up terminal then type in uname -r and you will get the number there...

installed the correct seatbelt as you do rebooted and about TIME...

 

every thing worked again PHEW!!!! just in time i needed to do some work

 

get the seatbelts from here

 

http://www.insanelymac.com/forum/index.php?showtopic=148566

 

:-)

 

hope that helps you people as much as it helped me

 

 

Timski,

 

Good work! Can you go into detail on the steps you took to update? Also, what is zep's tool?

 

Did this fix your graphics problems completely?? I don't want to update and have to reinstall again

 

Thanks!

[Timski]

Timski,

 

Good work! Can you go into detail on the steps you took to update? Also, what is zep's tool?

 

Did this fix your graphics problems completely?? I don't want to update and have to reinstall again

 

Thanks!

 

ok here is steps for you

 

this is for AMD

 

1) go to this URL and get the combo download http://support.apple.com/downloads/Mac_OS_..._8_Combo_Update

 

2)go and get the Zephyroth utilities and install that http://rapidshare.com/files/11220233/AMD-...Update.zip.html

 

 

3) once you have the combo update open the .dmg

 

4) install and launch zeps tool (amd patcher) choose a folder to save the files in i just created one on the desktop

 

5) drag the install package from the combo dmg to the amd patcher window

 

6) click on the arrow icon on the left to log a window will appear so that you can see what is going on then click patch.. (this takes a while get yourself a cuppa)

 

7) whilst that is going get osx86tools from here http://code.google.com/p/osx86tools/ install that

 

8) once that is installed and launched click on back up extensions... save it to desktop in a folder

 

9) once the combo has finished patching you will have a new installer package in the folder you chose it to save to.. run the patched 10.5.8 installer

 

now depending on the distro you have you may need to reinstall ISOUSBFamily.kext and seatbelt.kext you need 10.5.5 for voodoo 9.5 and 10.5.6 for voodoo 9.6 ( open terminal type in uname -r you will get a number that's the version of your kernel) get them from here http://www.insanelymac.com/forum/index.php?showtopic=148566 and then use the EFI installer to add your graphics again....

 

Bluetooth you need to search for bluetooth file exchange using spotlight copy that to your dock as it will not start on its own...

 

intell

 

you can update from system updates just back up your extensions 1st always a good idea

also you may need to read some of the info out there before you dive in but most people are reporting a few issues

 

i hope that helps ya

 

tim

:-)