Jump to content
6 posts in this topic

Recommended Posts

I'm not very good in English so I have to write this contribution has chosen Google Translator. So, in advance sorry if something is not written as it should be. 

I have a laptop Sony VAIO VGN-NR31Z / S its specification is:

CPU: Intel Core 2 Duo T5500 @ 1,83 GHz 
RAM: 3 gb (2 +1) PC2-5300 DDR2 666 
Grafika: nVidia GeForce 8400M GT - 128 megabajt GDDR3 
HDD: Fujitsu-Siemens 200gb - SATA150 - 8MB cache 
Audio: 82801H (IHC8) HD Audio - Realtec Semiconductor 262HD Audio 
SATA: Sony Mobile SATA AHCI 
IEEE1394: Sony PCIxx12 OHCI 
SMBus: 801xx/63xx/63xxSMBus 
LAN: Marvell Yukon 88E8039 PCI-E Fast Ethernet 
WiFi: Intel 4965AGN
Screen: 1280x800

I tried to install KALYWAY_LEO_10.5.1intel_SSE2_SSE3 and iATKOS 5i 10.5.5 Intel DVD In both cases, the installation was started and the first boot ... But then whether I use the-x, or not at booting from a sudden you not display turned off and I watched on a black screen ... I told you that the wait to be hop but even after 2 hours nothing ... Please, therefore, on the advice of what to do? Use a different installation disc? Or the choice to install check?

Link to comment
https://www.insanelymac.com/forum/topic/142007-sony-vaio-vgn-nr31zs/
Share on other sites

So I found a couple of other things ... When you link to an external monitor to osx86 booted but only on an external monitor ... Another thing I found is that the touchpad does not work so I joined an external mouse, but this was followed by another unpleasant findings ... OSx86 report that I connect the keyboard ... Unfortunately, I have only PS / 2 keyboard and the notebook I have only USB ... So I have to further investigate ... This tested on iATKOS 5i 10.5.5 Intel DVD. Now I'm going to test KALYWAY_LEO_10.5.1intel_SSE2_SSE3.

I have Sony VAIO FZ38M and had the same problem with iDeneb v1.3 and iATKOS 5i. Graphic card 8400m GT have two interfaces one for internal (digital interface) LCD and the other (analog interface) for external LCD monitor. So after an out after installation i suspect that the Leopard didn't recognize graphic adapter corectly and I tried to connect external LCD to VGA output. I was right, the VGA output works just fine. Also, I tried HDMI which reasonably doesn't work. If I try some "exotic" application I got message that my card doesn't support such feature, but 8400 should.

 

So, after installing OS X on VAIO, connect external LCD, if you have one, and install appropriate diver if you can find it.

So after me to be so unable to get vuber KALYWAY_LEO_10.5.1intel_SSE2_SSE3 so I re-visited the Forum ... And I found that I must install the patch for the PS / 2 .. So I embarked on re-installation iATKOS 5i 10.5.5 Intel DVD and I installed this patch ... Touchpad keyboard works, too ... So I back my first major problem and to the functioning of the Integrated Displays my notebook ...

 

I have Sony VAIO FZ38M and had the same problem with iDeneb v1.3 and iATKOS 5i. Graphic card 8400m GT have two interfaces one for internal (digital interface) LCD and the other (analog interface) for external LCD monitor. So after an out after installation i suspect that the Leopard didn't recognize graphic adapter corectly and I tried to connect external LCD to VGA output. I was right, the VGA output works just fine. If you try some "exotic" application I got message that my card doesn't support such feature, but 8400 shoud.

 

So, after installing OS X on VAIO connect external LCD, if you have one, and install appropriate diver if you can find it.

thanks for the information but I have to come too ... Now I have no nothing more than to find those drivers ... You have you found any?

I have got the same laptop, I tried iATKOS 1.0i and it worked. But no graphic drivers and no wifi, and no ethernet. Only 1024*768 display... but worked. I had to boot from CD by pressing F8 as soon as the DVD booted. iATKOS 5.0i didn't worked for me. :s

 

I have got the same laptop, I tried iATKOS 1.0i and it worked. But no graphic drivers and no wifi, and no ethernet. Only 1024*768 display... but worked. I had to boot from CD by pressing F8 as soon as the DVD booted. iATKOS 5.0i didn't worked for me. :s

 

I have got the same laptop, I tried iATKOS 1.0i and it worked. But no graphic drivers and no wifi, and no ethernet. Only 1024*768 display... but worked. I had to boot from CD by pressing F8 as soon as the DVD booted. iATKOS 5.0i didn't worked for me. :s

I almost slept all night and looking at how the Internet could be my problem ... And I found that so far there is no solution to this probému only possibility to work in VESA mode ... Since the VAIO uses a specific method of connecting internal LCD to the graphics card ... Drivers who are currently unable to initialize properly display and thus find ... I have reconciled with and looking for a way to force my OSx86 standard boot in VESA mode, and even how to change the resolution of 1280x800 on VESA mode ... I will be depleted to the hardware acceleration I do not mind so much. Regarding the functionality of Ethernet it is not such a problem again ... Here you go popsené http://forum.insanelymac.com/index.php?showtopic=28680

×
×
  • Create New...