nirvanaguy19 Posted December 1, 2008 Share Posted December 1, 2008 I installed iatkos 4i on my ip35-e. everything works fine but bootup is extremely slow. it waits for about 30 seconds before it prints "IOKitWaitQuiet() timed out waiting to write kernel symbols" and another few seconds and then prints " InterfaceNamer: timed out waiting for IOKit to quiesce". After this boots up. Once running things are fine. I am using just a sata hdd. i have a ide dvd rw but dont have jmicron kext installed, so i dont use it in osx (shortly replacing with sata dvd-rw) any help would be appreciated Link to comment https://www.insanelymac.com/forum/topic/139040-abit-ip35-e-iatkos-4i-slow-boot/ Share on other sites More sharing options...
0o0 Posted December 1, 2008 Share Posted December 1, 2008 same but takes 4 to 7mins. iatkos4a amd hpdv6404 Link to comment https://www.insanelymac.com/forum/topic/139040-abit-ip35-e-iatkos-4i-slow-boot/#findComment-984239 Share on other sites More sharing options...
UnaClocker Posted December 2, 2008 Share Posted December 2, 2008 Wild.. I couldn't even see my SATA hard drive with iAtkos 4i on my IP35-e.. You got farther than I did.. The old Kalyway works well, as does iDeneb 1.3, I see no lag on bootup with either of those. Link to comment https://www.insanelymac.com/forum/topic/139040-abit-ip35-e-iatkos-4i-slow-boot/#findComment-984800 Share on other sites More sharing options...
nirvanaguy19 Posted December 2, 2008 Author Share Posted December 2, 2008 Wild.. I couldn't even see my SATA hard drive with iAtkos 4i on my IP35-e.. You got farther than I did..The old Kalyway works well, as does iDeneb 1.3, I see no lag on bootup with either of those. for ideneb 1.3 can you install with ide dvd-rw or need sata. any other issues with ideneb 1.3, does sleep work does it come with sound/network drivers Link to comment https://www.insanelymac.com/forum/topic/139040-abit-ip35-e-iatkos-4i-slow-boot/#findComment-984856 Share on other sites More sharing options...
UnaClocker Posted December 2, 2008 Share Posted December 2, 2008 SATA is a must, both the hard drive and DVD drive. Time to let go of the past. Yeah, sound is no big deal at all. iDeneb 1.3 includes the ALC888 driver. Onboard NIC hasn't worked since 10.5.4, I have a PCI Intel card using the Tulip driver. I have never been able to get the machine to wake from sleep. I've spent a good deal of time trying. Link to comment https://www.insanelymac.com/forum/topic/139040-abit-ip35-e-iatkos-4i-slow-boot/#findComment-984898 Share on other sites More sharing options...
nirvanaguy19 Posted December 3, 2008 Author Share Posted December 3, 2008 ideneb 1.3 worked great, video/sound/network worked out of the box, booting is way faster as well, with all sata ofcourse Link to comment https://www.insanelymac.com/forum/topic/139040-abit-ip35-e-iatkos-4i-slow-boot/#findComment-986150 Share on other sites More sharing options...
UnaClocker Posted December 3, 2008 Share Posted December 3, 2008 Glad I could help out. Link to comment https://www.insanelymac.com/forum/topic/139040-abit-ip35-e-iatkos-4i-slow-boot/#findComment-986160 Share on other sites More sharing options...
fireedo Posted December 3, 2008 Share Posted December 3, 2008 why not try install retail leopard....it works great on abit IP35-e faster boot around 26 second I have working boot 132 iso for my setup if someone with abit ip35-e need it I will try to upload it Link to comment https://www.insanelymac.com/forum/topic/139040-abit-ip35-e-iatkos-4i-slow-boot/#findComment-986256 Share on other sites More sharing options...
UnaClocker Posted December 3, 2008 Share Posted December 3, 2008 Heck yeah, hook me up with that. Toss it up on one of the many free file hosting sites and pass along the URL. Link to comment https://www.insanelymac.com/forum/topic/139040-abit-ip35-e-iatkos-4i-slow-boot/#findComment-986542 Share on other sites More sharing options...
aviso Posted December 16, 2008 Share Posted December 16, 2008 Yah, do please upload your IP35-e boot132 iso, fireedo, thanks very much~ Link to comment https://www.insanelymac.com/forum/topic/139040-abit-ip35-e-iatkos-4i-slow-boot/#findComment-1000703 Share on other sites More sharing options...
UnaClocker Posted December 16, 2008 Share Posted December 16, 2008 Just FYI.. I installed iATKOS 5i on my machine just before 10.5.6 came out because it has the new PCEFIv9 that was specifically supposed to support 10.5.6.. Yup, works like a champ, and my bootups have never been so fast before. Quite impressive. I think it's got touches of Boot132 in it because I have a /Extra folder with extensions in it, and I didn't have to run any script in the background while doing the 10.5.6 update, I simply ran it and it worked.. Link to comment https://www.insanelymac.com/forum/topic/139040-abit-ip35-e-iatkos-4i-slow-boot/#findComment-1001456 Share on other sites More sharing options...
kalne Posted February 24, 2009 Share Posted February 24, 2009 why not try install retail leopard....it works great on abit IP35-efaster boot around 26 second I have working boot 132 iso for my setup if someone with abit ip35-e need it I will try to upload it I have an Abit IP35-E and am trying to get an ISO that will boot my retail 10.5.6 DVD, if you can upload that ISO it would be very much appreciated. Link to comment https://www.insanelymac.com/forum/topic/139040-abit-ip35-e-iatkos-4i-slow-boot/#findComment-1089665 Share on other sites More sharing options...
UnaClocker Posted February 24, 2009 Share Posted February 24, 2009 Ya know, I accepted fireedo's offer of that ISO image 3 months ago. I never heard a peep out of him. I don't think you're going to get it. You'll have to roll your own. Shouldn't be too hard, the IP35 runs quite vanilla, there isn't much you need beyond the basic Boot132 disk. Link to comment https://www.insanelymac.com/forum/topic/139040-abit-ip35-e-iatkos-4i-slow-boot/#findComment-1090175 Share on other sites More sharing options...
kalne Posted February 25, 2009 Share Posted February 25, 2009 Ya know, I accepted fireedo's offer of that ISO image 3 months ago. I never heard a peep out of him. I don't think you're going to get it. You'll have to roll your own. Shouldn't be too hard, the IP35 runs quite vanilla, there isn't much you need beyond the basic Boot132 disk. Ya, I used one of the boot disks from f41qu3's guide here http://www.insanelymac.com/forum/index.php?showtopic=113288 The one labeled at the end of the post "Download .ISO with modified kexts:" Here: http://www.mediafire.com/?1ne1zbl4znv Video worked fine with my 8800GT on the IP35-e although it is a little sluggish, it was identified properly in the device name. The previously mentioned image allowed me to boot the 10.5.6 retail leopard disc and install it without a problem. However, LAN and Sound did not work out of the box. I am tracking them down one by one. Hope this helps someone :censored2: Link to comment https://www.insanelymac.com/forum/topic/139040-abit-ip35-e-iatkos-4i-slow-boot/#findComment-1090939 Share on other sites More sharing options...
UnaClocker Posted February 26, 2009 Share Posted February 26, 2009 Sound is pretty easy. LAN.. Good freakin luck.. I disabled it in BIOS and tossed a a Realtek 8139 card.. Link to comment https://www.insanelymac.com/forum/topic/139040-abit-ip35-e-iatkos-4i-slow-boot/#findComment-1091622 Share on other sites More sharing options...
Macs_Minus_The_Tax Posted March 4, 2009 Share Posted March 4, 2009 Ya, I used one of the boot disks from f41qu3's guide here http://www.insanelymac.com/forum/index.php?showtopic=113288 The one labeled at the end of the post "Download .ISO with modified kexts:" Here: http://www.mediafire.com/?1ne1zbl4znv Video worked fine with my 8800GT on the IP35-e although it is a little sluggish, it was identified properly in the device name. The previously mentioned image allowed me to boot the 10.5.6 retail leopard disc and install it without a problem. However, LAN and Sound did not work out of the box. I am tracking them down one by one. Hope this helps someone Kalne, would you mind uploading the image to a hosting site for others to download? I tried the link, and it appears the file is no longer there. I and others would greatly appreciate it. I've tried all the others in the guide, and none of them work without some workaround (won't let you get past certain screens, don't play the intro, etc.). Thanks in advance! Link to comment https://www.insanelymac.com/forum/topic/139040-abit-ip35-e-iatkos-4i-slow-boot/#findComment-1097752 Share on other sites More sharing options...
Recommended Posts