lunux Posted November 30, 2008 Author Share Posted November 30, 2008 working kext for ATI radeon ID 5462 , if you use it please change before your card ID in Callisto, Atiradeon kext some problem for movie and coverflow. ATIQECIX600 Link to comment Share on other sites More sharing options...
albmac8 Posted December 10, 2008 Share Posted December 10, 2008 Can i use it with X700? How? Link to comment Share on other sites More sharing options...
tomtang Posted December 11, 2008 Share Posted December 11, 2008 Is this work with X600 ID:3150 ? Link to comment Share on other sites More sharing options...
lunux Posted December 11, 2008 Author Share Posted December 11, 2008 try it I think is a good but partial solution at least you have native resolution and more if you are lucky. BUT please change your ID number in kext ! have fun unrar the file in desktop change ID number of you card , put in info.plist of CallistoHAL , Atiradeon9700 using texedit. install all the kexts using kexthelper, repair permissions and reboot , I think works on all old ATI card under X1000. Link to comment Share on other sites More sharing options...
albmac8 Posted December 13, 2008 Share Posted December 13, 2008 hi lunux... i've tried your kexts... i've change the 3 id there are in CallistoHAL and the one there is in AtiRadeon9700 kext, then i've installed it but after the permission reparation and the reboot, osx won't boot...it freezes at CODE_SIGNING... however i've tried safe boot with -x , the system runs but there aren't multiple resolution and QE/CI... Is the procedure right? Is there a solution for that? (i've an X700 256mb, the id is 5E4B) thanks for all (sorry for my english) Link to comment Share on other sites More sharing options...
lunux Posted December 13, 2008 Author Share Posted December 13, 2008 CODE_SIGNING is a problem of AMD cpu, have you an AMD pc? I dont think is connected unless you have a some AMD ATI motherboard try only Callisto kext and check the resoluton, by the way my kext are for LEO 10.5.5. another question do you have installed some EFI or Chameleon Efi bootloader? CODE_SIGNING is a problem of AMD cpu, have you an AMD pc? I dont think is connected unless you have a some AMD ATI motherboard try only Callisto kext and check the resoluton, by the way my kext are for LEO 10.5.5. another question do you have installed some EFI or Chameleon Efi bootloader? CODE_SIGNING is a problem of AMD cpu, have you an AMD pc? I dont think is connected unless you have a some AMD ATI graphic motherboard but I used for Ati xpress 200 on AMD architecture amd it worked. try only Callisto kext and check the resoluton, by the way my kext are for LEO 10.5.5. another question do you have installed some EFI or Chameleon Efi bootloader? Link to comment Share on other sites More sharing options...
albmac8 Posted December 13, 2008 Share Posted December 13, 2008 yes, i've an amd cpu and an asus a8n-sli...but before the installation of your kexts, the message code_signing doesn't appear and the system boots correctly... (now i reinstall osx, kaly 10.5.2, but i don't know if i've install efi or charmaleon...) however, when i tried only callisto the system works perfectly with multiple resolution, but i don't have QE/CI... please, tell me how-to have QE/CI in my card thanks Link to comment Share on other sites More sharing options...
gsustek Posted December 13, 2008 Share Posted December 13, 2008 ok, o use coverg-s utility to get full resolution,what is diference in this kext and your kexts? your are from X1000 LEO wright? Link to comment Share on other sites More sharing options...
lunux Posted December 15, 2008 Author Share Posted December 15, 2008 I am sorry if my kext have damaged your osx, but it seems very strange because they do not affect the system , you can delete and everything come back to normal. I cannot suggest more because I am not a MA legend but I only tried to do some experiment my ideneb 10.5.5. works very well and my kexte are good , try again if you wish bye Link to comment Share on other sites More sharing options...
gsustek Posted December 15, 2008 Share Posted December 15, 2008 can you desribe your procedure step by step with commands? Link to comment Share on other sites More sharing options...
lunux Posted December 15, 2008 Author Share Posted December 15, 2008 step by step instaled ideneb 10.5.5 with chameleon efiboot installed all the kext using kextehelper repair permissions reboot then i had menubar trasparent and in system profiler QE CI activated problems for movie (white screen ) and coverflow bye image from system profiler screen.tiff Link to comment Share on other sites More sharing options...
Shuky Posted December 16, 2008 Share Posted December 16, 2008 how you install kext! using kextehelper step by step like others.... with print screen.. please. Link to comment Share on other sites More sharing options...
albmac8 Posted December 17, 2008 Share Posted December 17, 2008 i've reinstalled osx and i've updated it to 10.5.5 i've changed the 3 id in CallistoHAL and the one id in AtiRadeon9700...i've installed them with Kext Helper, i've done the reparation of permission and i've reboot, but the kexts haven't had effect...in fact there isn't in Extensions folder the kext of CallistoHAL...however i've manually reinstalled it but now after the loading of callisto the system freeze at Macintosh /usr/sbin/ocspd[84]: starting ... If i boot osx in safe mode, the system boots...but there isn't QE/CI activated and multiple resolution... Is there a solution for this? thanks Link to comment Share on other sites More sharing options...
lunux Posted December 17, 2008 Author Share Posted December 17, 2008 I cannot say why is not usefull for you try to install only Callisto kexts to use native resolution which ID is your card ? delete all ATITadeon kexts to check if works full bios resolution. if not I am sorry but I cannot do more . Link to comment Share on other sites More sharing options...
albmac8 Posted December 17, 2008 Share Posted December 17, 2008 my card has ID 5E4B... i've restored a backup extensions folder and now osx works... now i install only Callisto with my ID, but Do i delete all ATI Radeon kexts? Link to comment Share on other sites More sharing options...
lunux Posted December 18, 2008 Author Share Posted December 18, 2008 please delete only ATIRADEON9700 kexts you have installed from my rar file. bye Link to comment Share on other sites More sharing options...
albmac8 Posted December 19, 2008 Share Posted December 19, 2008 thanks for your patience lunux... ok, i can try only callisto kexts, but i get only multiple resolution, that i've already had when i've installed callisto last time, but no QE/CI Is not there a solution for QE/CI for my video card? thanks Link to comment Share on other sites More sharing options...
albmac8 Posted December 22, 2008 Share Posted December 22, 2008 lunux...must i install natit kext?!? if you want...can you change for me the id in your package and upload here? maybe i mistake something.... thanks a lot Link to comment Share on other sites More sharing options...
lunux Posted December 22, 2008 Author Share Posted December 22, 2008 Ok no problem, which ID is yur graphic card ?? Link to comment Share on other sites More sharing options...
albmac8 Posted December 22, 2008 Share Posted December 22, 2008 my video card id is 5E4B (5e4b i think it's the same)... thank you very much if your kexts won't work yet...what is the procedure to repair the boot? Link to comment Share on other sites More sharing options...
tomtang Posted December 23, 2008 Share Posted December 23, 2008 I'm in the situation as albmac8, but I use x600 mobility with ID:3150 . Try to install your kext several time but didn't work. Right now I've got Multiple resolution with Callisto kext. What should I do next to enable QE/CI? Thanks you. Link to comment Share on other sites More sharing options...
lunux Posted December 23, 2008 Author Share Posted December 23, 2008 my video card id is 5E4B (5e4b i think it's the same)...thank you very much if your kexts won't work yet...what is the procedure to repair the boot? try this kext for your ID if kext are wrong boot OSX using -x then delete all atiradeon9700 kext if does not work i cannot help you bye I'm in the situation as albmac8, but I use x600 mobility with ID:3150 .Try to install your kext several time but didn't work. Right now I've got Multiple resolution with Callisto kext. What should I do next to enable QE/CI? Thanks you. try agpart or koverg to patch kext for your system Link to comment Share on other sites More sharing options...
albmac8 Posted December 23, 2008 Share Posted December 23, 2008 thank you very much lunux... is not a problem if my video card is PCI express? nothing is change...the system boot correctly but this time there isn't multiple resolution, and QE/CI obviously... are you sure your modified kexts are correct? system profiler says me that there aren't kexts loader for graphics card... thanks Link to comment Share on other sites More sharing options...
JayDeeNZ Posted December 25, 2008 Share Posted December 25, 2008 i've tried doing the steps so many times and all the different ways, but still can't get my x600 to work. The ID is 5B62. Can you point me in the right direction, or upload a package for this ID? Thanks in advance! Link to comment Share on other sites More sharing options...
aphoticd Posted January 6, 2009 Share Posted January 6, 2009 Ok, I spent a few hours on the ideas here to try to get my ATI Radeon 9700 Pro 128MB AGP card to work in iDeneb 1.3 10.5.5. I downloaded every Leopard Combo updater (plus 10.4.8) and tried every version combination. In the end I was able to get System Profiler to report CI/QE as Hardware Accelerated / Supported but the results were terrible. Performance was worse than the 'Software' CI/QE support (10.5.5 ATI drivers) With this fix, I experienced a lot of mouse tearing and square glitches on the screen. I really don't think this solution taps into the card's actual hardware acceleration, it just reports to the OS that it's working fine. Also no OpenGL apps would work at all with this setup. Maybe it works better on the X600 and other sub-X1000 series cards though.. but this is just my experience. The final combination of software versions I used was: ATIRadeon9700.kext - 10.4.8 Intel Combo Update ATIRadeon9700DVDDriver.bundle - 10.5.1 Combo Update ATIRadeon9700GA.plugin - 10.4.8 Intel Combo Update ATIRadeon9700GLDriver.bundle - 10.5.1 Combo Update ATIRadeon9700VADriver.bundle - 10.5.1 Combo Update ATIRNDRV.kext - 10.5.1 Combo Update ATIRadeonX1000GLDriver - 10.5.1 Combo Update Callisto b008 Natit "edited" from lunux A few weeks ago, I bought a 2nd hand Nvidia FX5500 for about $20 which performs incredibly well in comparison (overall performance on this P4 system is on par with my PowerBook G4). I was just giving the 9700 one last shot to try to untap it's potential in Leopard, but now I'm happy to let it go knowing that I tried everything I could! I read all the warnings, but I'll reiterate; Don't waste your time trying to get an ATI 9700 AGP to work in Leopard! (Maybe one day AGPGart will have full support for it...) Link to comment Share on other sites More sharing options...
Recommended Posts