Jump to content
11 posts in this topic

Recommended Posts

first off, apparently searching '750i' (without quotes) breaks the forums search, because it brings up no results, and I know I have seen 750i mentioned somewhere here, also, searching 'P5N-D' resulted in several mentions of the P5N-E, but only one with the -D

 

Second off, what is the feasibility of installing OS X on a 750i based board? I have seen 650i install threads, but I figure the 6 -> 7 makes a difference. I would need functional SATA drives, audio, ethernet, and firewire (might be able to live without FW). (for those curious, it would either be an ASUS P5N-D or an EVGA 750i FTW paired with an E8400 and a 9600GT or two)

in the 10.5.2 hardware compatibility thread, there is someone who used a P5N-D, would this be a typical case?

 

Thanks for the help!

Link to comment
https://www.insanelymac.com/forum/topic/103445-feasibility-of-os-x-on-750i/
Share on other sites

hmmm..

 

my specs are as follows...(the pc has not arrived as yet) expecting the hardware to be here in a week or so ..

 

Intel C2D E8400 3.0ghz

ASUS p5n-d ( thats the one with the 750i sli)

Corsair Ram 2gb(1x2) 800mhz

XFX Geforce 8800GT, 512mb

19'' widescreen LCD DELL

Sony DVD-writer (IDE)

 

...

 

will be installing( atleast try to!) 10.5.2 on it...already have 10.5.2 on the old machine...hope this works..will keep updating!

  • 1 month later...

No luck , can't get leopard to work,

 

multiple issues: Nvidia 8800GT 512mb, not working, gives a blue screen on my 15 inch monitor and a black screen on my 19 inch monitor :D

Can't get the ps2 keyboard/mouse to work, i have no clue to to get that working, tried using hacked kexts etc. no luck

I can't get leopard to do a first boot :thumbsdown_anim::( ......it just does not happen, maybe its a video drivers issue, but then again...i can't remove them cas i cant type when my keyboard does not work!

 

i tried using macdrive , ....can anyone please help me..

 

i am using the Leo4all v3 release...

 

E8400 @ 3.0ghz

ASUS P5N-D 750i chipset

(2x1024mb) corsair 800mhz

ps2 keyboard and mouse, i also have a usb mouse , but no usb keyboard

XFX Geforce 8800GT 512mb aplha dog, zalman cooled

...please help!

  • 1 month later...

well, it worked for me. I used a combo of iAtkos v2.0i and Kalyway 10.5.2

 

My Hardware is:

Intel E6600 @ 2.7 from stock 2.4

PNY 8600 GTS 256 MB VRAM

P5N-D

sata hard disk

4 gb 800 mhz ddr2 ram

ide dvd burner

USB mouse and keyboard

 

This is what I did:

Load up kalyway with -x, but for me no need, Install with kalyway, load nvinject video drivers, speedstep kernel even though on nforce, and most of the drivers and apps

DONT BOOT

Insert iAtkos v2.0i

load with "nforce -v -x cpus=1", and if you have over 2 gb of mem, add "maxmem=2048"

uncheck everything

check nforce kernel, sse3 efi

check all of network drivers

and misc fixes (automount)

 

Everything works fine, except for firewire not being detected, audio working even though it says none detected, and usb drives dont automatically mount, have to restart, looking for a fix.

 

Cheers!

Load up

  • 2 months later...

note: monitor shouldn't play a role, and PS/2 keyboards/mice result in hangs (probably unsupported) I've tried to use ps/2 keyboards and all resulted in hangs; just save yourself the hassle and buy a cheap usb keyboard, and trust me, you're life will be much easier (now that os x will work :(

 

p.s make sure your bios is configured correctly!

had this working perfectly on my P5N-D until i tried to update to 10.5.5, then it wouldnt boot saying it couldnt mount the drive

 

How did you go about updating to 10.5.5.......probably you have installed a vanilla kernel which won't work with your nForce MOBO.....

  • 3 weeks later...
×
×
  • Create New...