MadTux Posted September 21, 2007 Share Posted September 21, 2007 I moved kexts to Sound subforum, there is a new one with working shutdown: http://forum.insanelymac.com/index.php?showtopic=129485 This is same as new0862.zip but with volume control and balance AppleHDA0862.zip This should work for lenovo and all other laptops with muted sound in bios(no sound with Azalia) new0862.zip This is a new kext for toshiba laptops it is based on 10.5.4 HDA kext, please test it. If you had sound with azalia, this one should work also (because you sound card is unmuted in bios) AppleHDA862_Toshiba.zip It should give you IntSpeakers and Headphones, and external mic on laptop. Please post the results here! For noobs: 1. Download kexts, drag them to extensions folder. (this is not for a patcher, just copy and paste files) 2.And repair permissions chmod -R 755 /System/Library/Extensions/*.kext chown -R 0:0 /System/Library/Extensions/*.kext rm -rf /System/Library/Extensions.* 3.Restart Sound should come from speakers, and when you plug the headphones it should switch automaticly Link to comment Share on other sites More sharing options...
Azurael Posted September 21, 2007 Share Posted September 21, 2007 I wonder if this would work on my N200... Should do, even if it needs a devid change for the ICH8 HDA controller, since it's got the same codec and also needs "options snd-hda-intel model=lenovo" with ALSA. Link to comment Share on other sites More sharing options...
MadTux Posted September 21, 2007 Author Share Posted September 21, 2007 I hope it works(for you), the same problem I had on lenovo c200, but I instaled latest ALSA from CVS source to get a GOOD codec dump. Link to comment Share on other sites More sharing options...
clockworx Posted September 21, 2007 Share Posted September 21, 2007 I hope it works(for you), the same problem I had on lenovo c200, but I instaled latest ALSA from CVS source to get a GOOD codec dump. Is this for PCI device 10ec,0862? I have an ALC862 in my Toshiba laptop and was going to take a shot with this. Azalia currently works for me, but the headphones apparently aren't supported. Link to comment Share on other sites More sharing options...
MadTux Posted September 21, 2007 Author Share Posted September 21, 2007 It depends on your audio codec dump, if it is a same as for Lenovo then it should work Link to comment Share on other sites More sharing options...
bl00dfeast Posted September 27, 2007 Share Posted September 27, 2007 Hi MadTux , I have a Lenovo 3000 N100, i attach the codec dump , Is for this codec?? because your kext sadly don't work ... :-( dmesg show this : ALCinject: Starting.ALCinject: Setting built-in=<data not shown> ALCinject: Setting layout-id=<data not shown> ALCinject: Setting PinConfigurations=<data not shown> Greetz and thanx for your efforts!!!! alc861.txt Link to comment Share on other sites More sharing options...
RMCL Posted September 27, 2007 Share Posted September 27, 2007 I updated my bios and installed the two kexts with the new updated Apple.HDA.kext but still have no sound. Where it says "Choose a device for sound output" and I highlight either Headphones or Built-In Speaker, it says "The selected device has no output controls and I'm unable to move the sound slider. I am able to move the output bar for the mic. What could I have done wrong? Thanks for all your hard work. Link to comment Share on other sites More sharing options...
RMCL Posted September 27, 2007 Share Posted September 27, 2007 It seems like the newest bios version is only for models that were preloaded with WinXP. Unfortunately, mine came with vista and 63ET62WW is the latest version available for my laptop If you could give me any help in getting my audio working it would really be appreciated. Thx Link to comment Share on other sites More sharing options...
gotoh Posted September 27, 2007 Share Posted September 27, 2007 very interesting. I now have buit in speakers + headphones working on Toshiba A200-1DR but volume level can't be adjusted. But at least I can select which output to use ! Mic jack is working too, but volume is adjustable for this one. looks promising, Taruga did it again ! Link to comment Share on other sites More sharing options...
MadTux Posted September 30, 2007 Author Share Posted September 30, 2007 Hi bl00dfiest, it is not for a patcher, I youst manualy modified AppleHDA.kext like it says in tarugas guide. that is all. Link to comment Share on other sites More sharing options...
nils82 Posted October 8, 2007 Share Posted October 8, 2007 gotoh I have the same laptop A200-1DR and still volume adjustement and does tik tik sometimes anybody has a solution ? Link to comment Share on other sites More sharing options...
futurcorerock Posted October 18, 2007 Share Posted October 18, 2007 You should supply some information on the adaptations you made to make this kext work with the 862. There are a lot of people who don't necessarily have Lenovo laptops who'd love to adapt this to their systems (me included) Link to comment Share on other sites More sharing options...
avon Posted October 22, 2007 Share Posted October 22, 2007 Hi, MadTux, This is really a smart way to fix the audio problem. Would you mind posting you current bios version number and your audio subsystem ID (like 0x17aa8e2d) please? I got no luck following ibm guide. I downloaded bios version 3.12 (63af08us), and used the default ROM file (DL01108A.WPH). But my bios version didn't change after update, which is still version 1.08 (63ET62WW), as RMCL. I 'm curious which ROM file worked with you? Cheers! Link to comment Share on other sites More sharing options...
MadTux Posted October 24, 2007 Author Share Posted October 24, 2007 First sorry people, I was busy at colleague.Yes avon, that was my idea. But I had problems with usb keyboard. I didn't have an usb flash disk to test this error. But after I updated the bios with adi rom (you have a realtek too inside other folder), sound did work, but the problem was in usb (because subsystem ID for USB was changed too but it is not working). Every time I used a keyboard, usb discoonnects. So my opinion about this is that we only need to change the subsystem id inside realtek rom file. And I found a couple of pages that are describing how to change ID's inside rom (people are doing this to get there ethernet card working under linux) so I will tray and give a shot to that.So my sound is working now, but I need to use the usb hard disks so I think that I will put the backup rom back.So avon I think it is possible to change only sound ID with editors inside Borg Bios collection.check this:http://www.xtremesystems.org/forums/showth...6354&page=3 Link to comment Share on other sites More sharing options...
realogic Posted November 4, 2007 Share Posted November 4, 2007 Tried on Leopard, no sound I'm really loosing hope Link to comment Share on other sites More sharing options...
psthanh Posted November 9, 2007 Share Posted November 9, 2007 i can't use it in my lenovo y400 Link to comment Share on other sites More sharing options...
ashish Posted November 12, 2007 Share Posted November 12, 2007 why do we actually need dthe lastest bios??? but anyway i am posting to say that i have problem downloading the update. i think u should have stuck to your older upload site... Link to comment Share on other sites More sharing options...
ashish Posted November 12, 2007 Share Posted November 12, 2007 okay i did all what was required but somehow i cannot hear any sound. plus i can't even change the volume which i was able to when i was using AppleAz.. just for info i am using lenovo 3000 N100 which lastest bios (just downloaded it). its a intel T5500. now somebody please help me!!!!! Link to comment Share on other sites More sharing options...
netsharc Posted November 26, 2007 Share Posted November 26, 2007 Well am I a :censored2: idiot or what... I've been trying for 3 days now to get audio on my Leopard/Lenovo 3000 N100 to work, and then I thought I should google for the specs to the ALC862-VD and then I find this thread! Installed the updated driver (From the link at the bottom of the post), removed AppleAzaliaAudio.kext, it almost works... System Preferences>Sound sees the internal speakers and headphones but unfortunately says for both "the selected device has no output controls". The audio input works: plugging a mic in and tapping it produces a reaction in the "Input Level" meter System Preferences>Sound>Input. My system: Lenovo 3000 N100, BIOS 1.08. Apparently Lenovo has 2 different versions of BIOSes: BIOS v 1.x for Vista-bundled systems BIOS v 2.x for system that came with XP and the BIOS updater program, which at this moment has the version number 3.12!!! I wonder what the reason for having different BIOSes for different Windowses. We l my system came with FreeDOS (actually with a piece of paper that said I'm entitled to a CD with FreeDOS in it, if I give them $25 shipping and handling!), but it has the BIOS v. 1.08. Anyone have an idea how to fix the volume? Link to comment Share on other sites More sharing options...
psthanh Posted November 26, 2007 Share Posted November 26, 2007 sorry all . i can't download from the link. Please up load again . thanks Link to comment Share on other sites More sharing options...
keatliang2005 Posted November 30, 2007 Share Posted November 30, 2007 ALC862-VD What You will need: 1. If you don't have the latest version of your bios, You need to update it http://www-307.ibm.com/pc/support/site.wss/MIGR-67008.html P.S If you don't have instaled windows on your Lenovo(like me), you can use XPE CD start SP1 (live XP distribution from PeBuilder to update bios) (I am not going to explaine how to update bios all you need is on Lenovo page) 2. Download this zip file with and put in /System/Library/Extensions http://www.speedyshare.com/864438483.html 3. Repair permissions http://www.speedyshare.com/963992172.html 4. Restart 5. Play music in iTunes. please post your results, this is first release, only works: internal speakers and microphone, I will add more code in next release. THX Taruga for his AppleHDAGuide UPDATE NEW KEXT (Mic,IntSpeaker,Headphones): http://www.sendspace.com/file/ff6yvk after apply to my Lenovo Y400, it show the audio icon, inside the system prefrerence it detects internel speaker and headphone and microphone but i play MP3 with iTune, it's still no sound come out, plz help~~~~~ Link to comment Share on other sites More sharing options...
Azurael Posted November 30, 2007 Share Posted November 30, 2007 I can't work out what I need to change to get it working with the ICH8-M HDA controller. I'd really like sound now! Link to comment Share on other sites More sharing options...
f14nt Posted December 17, 2007 Share Posted December 17, 2007 I already follow your instructions but, in my Lenovo Sound still not working, I can't adjust the volume, please find attached file Please Help Me.... Thanks ALC862-VD What You will need: 1. If you don't have the latest version of your bios, You need to update it http://www-307.ibm.com/pc/support/site.wss/MIGR-67008.html P.S If you don't have instaled windows on your Lenovo(like me), you can use XPE CD start SP1 (live XP distribution from PeBuilder to update bios) (I am not going to explaine how to update bios all you need is on Lenovo page) 2. Download this zip file with and put in /System/Library/Extensions http://www.speedyshare.com/864438483.html 3. Repair permissions http://www.speedyshare.com/963992172.html 4. Restart 5. Play music in iTunes. please post your results, this is first release, only works: internal speakers and microphone, I will add more code in next release. THX Taruga for his AppleHDAGuide UPDATE NEW KEXT (Mic,IntSpeaker,Headphones): http://www.sendspace.com/file/ff6yvk Sound_Alc_862.ppt Link to comment Share on other sites More sharing options...
MadTux Posted December 26, 2007 Author Share Posted December 26, 2007 New kext only Headphones are working... but no mess with bios http://www.sendspace.com/file/4kev51 3. Repair permissions http://www.speedyshare.com/963992172.html 4. Restart 5. Play music in iTunes. please post your results. THX Taruga for his AppleHDAGuide This is a new kext, based on 268test kext. Please post a result. Again big thx to great Taruga. Link to comment Share on other sites More sharing options...
knucklehead Posted December 27, 2007 Share Posted December 27, 2007 This is a new kext, based on 268test kext. Please post a result.Again big thx to great Taruga. i have toshiba a200-14d laptop with leopard and it doesn't work for me.... i mean, i can hear on speakers but no input/output.... i have alc862 and here's the codec dump from ubuntu... ps: which patcher version you use? i was using 1.18 0862_linux_codec_dump.txt Link to comment Share on other sites More sharing options...
Recommended Posts