JesseR25NL Posted April 25, 2016 Share Posted April 25, 2016 Hi i want to install osx on my pc but i cant get it working i have an Msi970 motherboard amd fx 8320e processor and a GTX 960 graphics card if i install yosemite it stops at PCI Configuration and if i install mavericks it says Missing Bluetooth Controller Transport , if i boot it with -s i cant see root Could someone help me, if u can help me ask for my skype! i cant find niresh yosemite, amd unlocked. -Jesse i cant use a vm i get a guru error and i dont have a osx computer Quote Link to comment Share on other sites More sharing options...
spakk Posted April 25, 2016 Share Posted April 25, 2016 if you boot Yosemite, then boot with this flag: -v kext-dev-mode=1 npci=0x2000 GraphicsEnabler=No usekernelcache=No or ==> -v kext-dev-mode=1 npci=0x3000 GraphicsEnabler=No usekernelcache=No the problem with "PCI Configuration start" is solved with bootflag "npci=0x ..." Quote Link to comment Share on other sites More sharing options...
JesseR25NL Posted April 25, 2016 Author Share Posted April 25, 2016 if you boot Yosemite, then use this: -v kext-dev-mode=1 npci=0x2000 GraphicsEnabler=No usekernelcache=No or ==> -v kext-dev-mode=1 npci=0x3000 GraphicsEnabler=No usekernelcache=No the problem with "PCI Configuration start" is solved with bootflag "npci=0x ..." okay thanks wich amd flag do i need to use because if i dont use amd flag it will reboot pc Quote Link to comment Share on other sites More sharing options...
spakk Posted April 25, 2016 Share Posted April 25, 2016 the re-start of your system may be the cause, that your system start with a vanillia kernel, so check this: create a new folder ===> in System/Library/Kernels/ then insert in to the "Kernels" folder the amd kernel and boot with bootflags as described above. last amd kernel "10.10.5_SSEPlus_V2" or V3, see above under download. more info look here: http://www.insanelymac.com/forum/forum/491-os-x-1010-yosemite/ 1 Quote Link to comment Share on other sites More sharing options...
JesseR25NL Posted April 25, 2016 Author Share Posted April 25, 2016 so first startup windows and then go to System/Library/Kernels/ so first startup windows and then go to System/Library/Kernels/ Quote Link to comment Share on other sites More sharing options...
spakk Posted April 25, 2016 Share Posted April 25, 2016 if the folder is not valid, so create these folders and add there the amd kernel., then repair the permissions and renew the cache and boot again Quote Link to comment Share on other sites More sharing options...
JesseR25NL Posted April 25, 2016 Author Share Posted April 25, 2016 Do i need to do it from a mac or can it be done with a windows pc my vm doenst work Do i need to do it from a mac or can it be done with a windows pc my vm doenst work Quote Link to comment Share on other sites More sharing options...
spakk Posted April 25, 2016 Share Posted April 25, 2016 no problem, boot with: -s kext-dev-mode=1 npci=0x3000 (or npci=0x2000) GraphicsEnabler=No Usekernelcache=No It will take a few sec. then write: /sbin/fsck -fy (Press the Return key) After entering "/sbin/fsck -fy" then each part of your hard drive’s directory willbe checked. (Checking extents overflow file, Checking catalog file, Checking multi-linked files, etc.) It will take a few minutes. At the end, if your drive was OK, the screen will say “The volume (name of your hard drive) appears to be OK”. If any repair was made, you’ll see the prompt, “FILE SYSTEM WAS MODIFIED”. Then, you’ll see the root# prompt again. then run again the command until your hard drive appears to be "OK". Right after the root # prompt, enter the Following: reboot (Press the Return key) then your hackintosh should restart normally. edit: but it should be boot without what I've described above, only with bootargs:-v -f kext-dev-mode=1 npci=0x3000 (or npci=0x2000) GraphicsEnabler=No Usekernelcache=No Quote Link to comment Share on other sites More sharing options...
JesseR25NL Posted April 25, 2016 Author Share Posted April 25, 2016 okay thanks so i need to re run the command -s kext-dev-mode=1 npci=0x3000 (or npci=0x2000) GraphicsEnabler=No Usekernelcache=No , after i saw root# the Quote Link to comment Share on other sites More sharing options...
spakk Posted April 25, 2016 Share Posted April 25, 2016 I think that you must to install this package, but check your graphics after reaching OS X dektop: http://www.insanelymac.com/forum/files/file/354-amd-replace-kext-for-yosemite/ Quote Link to comment Share on other sites More sharing options...
JesseR25NL Posted April 25, 2016 Author Share Posted April 25, 2016 okay so i need to check your last message after i successfully unstalled OSX Quote Link to comment Share on other sites More sharing options...
spakk Posted April 25, 2016 Share Posted April 25, 2016 Ok... but if your system does not start successfully, then upload the Extra folder as a zip-file, then we will check whether the contents of the folder is OK/ or not. Quote Link to comment Share on other sites More sharing options...
JesseR25NL Posted April 25, 2016 Author Share Posted April 25, 2016 it didnt work but my vm works now but i cant get a installer dor yosemite because its via [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] but im trying el capitan now and i cant find kernels for el capitan does someone have a kernel for elcapitan amd fx8320e? Quote Link to comment Share on other sites More sharing options...
spakk Posted April 25, 2016 Share Posted April 25, 2016 if you can not install successfully Mavericks or Yosemite, then you will get enormous problems to install El Capitan, in this sense, much success amd kernel for FX CPU's read from here on: http://www.insanelymac.com/forum/topic/310796-amd-os-x-el-capitan-1011-fx-kernel-task-force/page-30 Quote Link to comment Share on other sites More sharing options...
JesseR25NL Posted April 25, 2016 Author Share Posted April 25, 2016 only yosemite doenst work im trying mavericks rn Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.