4 replies to this topic

[Beymen Bussines]

Hey guys i'm having a problem installing Lion 10.7 on a Desktop PC.

Problem/Issue: After loading all the kexts the screen goes black and reboots the system.

What i have:
mobo ASUS - P5PL2
cpu Intel Pentium 4   - 630
cpu alias  Prescott-2M
cpu instruction set x86, x86-64, MMX, SSE, SSE2, SSE3
cpu clock 3 Ghz - 12 - 15x multiplier Hyperthreading Technology
ide controller Intel 82801GB/GR/GH
Chipset Intel Lakeport i945PL
Graphics ATI Radeon X300 SE (RV370)
Sound1 Analog Devices AD1986A @ Intel 82801GB ICH7 - HDA A1
Sound2 Creative SB Live! 5.1 (SB0060) Sound Card

Bios Settings
Ide Operation Mode= Enhanced Mode, S-ATA + P-ATA
Hyperthreading Mode = Enabled
Execute Disable Function = Disabled
Intel SpeedStep Technology = Automatic
Hyper Path 3 = Enabled
Plug & Play OS = YES
PCI Latency Timer = 64
ACPI 2.0 = YES
ACPI APIC = Enabled

My Setup Mode:
- Mac Os X Lion 10.7 Installer.app  ( Appstore )
- Myhack Installer ( Sojugarden )

Created an USB-Stick with Myhack Installer. You can create a bootable USB Stick with Myhack.
Used the Generic Setup.

The problem is. When i startup from the USB Stick and select the Mac Os X Install... also with -x -f -v cpus=1
It loads all the kexts like normally.. and then it goes black and reboots... what can it be ?

[Beymen Bussines]

anybody ???

this is seperate from my other problem

Maybe this cpu is not supported ?? if so what do i have to do use another kernel ?????

[Beymen Bussines]

please?

[alaskantraveler]

-v -f cpus=1 busratio=20 npci=0x2000 PCIRootUID=1
maybe?

[alaskantraveler]

May have to change that last.

I have discovered that I need to put in cpus=2 and PCIRootUID=0 with no npci=xxxxxx

How ever mine is an AMD processor and will be different from your intel model.