diktus Posted March 17, 2008 Share Posted March 17, 2008 i dont know about tiger 10.4.10 x86 i found in a store and by it.after install my laptop can't boot. i used HP 520. Core duo T2300 945G GMA 950 512x2MB DDR 2 667 80gb SATA (not detect when install so i disable the native sata mode) lan VT 100 WLAN Intel pro wireless 3945 ABG installed with SSE3 (SSE2 Option uncheck) the error log: IO PCCARD info = intel PCIC Probe : not found IO PCCARD Bridge = start failed USB Caused wake event (EHCI) i82557 eeprom = checksum FF08 Incorrect intel 82577=couldn't allocated eeprom object i82557 ( eeprom : checksum e8F5 incorrect ) Please Help me Link to comment Share on other sites More sharing options...
toshiba_mac24 Posted March 19, 2008 Share Posted March 19, 2008 i dont know about tiger 10.4.10 x86 i found in a store and by it.after install my laptop can't boot. i used HP 520. Core duo T2300 945G GMA 950 512x2MB DDR 2 667 80gb SATA (not detect when install so i disable the native sata mode) lan VT 100 WLAN Intel pro wireless 3945 ABG installed with SSE3 (SSE2 Option uncheck) the error log: IO PCCARD info = intel PCIC Probe : not found IO PCCARD Bridge = start failed USB Caused wake event (EHCI) i82557 eeprom = checksum FF08 Incorrect intel 82577=couldn't allocated eeprom object i82557 ( eeprom : checksum e8F5 incorrect ) Please Help me Are you trying to install onto a external hard drive or are you partitioning your hard drive inside your computer? I tried to install onto laptop drive but only came up with network boot interface. After I fixed the problem, I installed it to an external hard drive that I barely use for backup. I partitioned my external and the install was fine. I was using the Kalyway DVD by the way toshiba_mac24 Link to comment Share on other sites More sharing options...
Recommended Posts