rashaditor Posted March 17, 2008 Share Posted March 17, 2008 Hi folks, Pls bear with me but I have a couple of Issues with my hackintosh installation. I have d/l'ed KALYWAY_LEO_10.5.1intel_SSE2_SSE3 version of Mac OSX installations. Unfortunately I cannot install it on my (assembled )Machine. The config is as follows. Firstly I tried using Winraron my PC but I got the message ! "E:\KALYWAY_LEO_10.5.1intel_SSE2_SSE3.zip: Unexpected end of archive" then I used 7-zip then I got the message "CRC failed.E:\KALYWAY_LEO_10.5.1intel_SSE2_SSE3.zip: File is broken" but I did manage to unzip it in 7-zip.I burned the 386m iso image on a CD and tried booting but it gave me following error Loading Darwin/x86 Ebios error read error: Error 0x32 Block8939856 Sectors 64 Pls note I didn't make any changes to my bios settings. I have a SAmsung SP0822N hard disk (IDE-80 gb) Please help me.I have attached the specs in an HTML file pls have a look. Thanks *Processor(s)* *Number of processors* 1 *Number of cores* 2 per processor *Number of threads* 2 per processor *Name* Intel Pentium D 820 *Code Name* SmithField *Specification* Intel® Pentium® D CPU 2.80GHz *Package* Socket 775 LGA *Family/Model/Stepping* F.4.7 *Extended Family/Model* F.4 *Core Stepping* B0 *Technology* 90 nm *Core Speed* 2800.5 MHz *Multiplier x Bus speed* 14.0 x 200.0 MHz *Rated Bus speed* 800.1 MHz *Stock frequency* 2800 MHz *Instruction sets* MMX, SSE, SSE2, SSE3, EM64T *L1 Data cache (per processor)* 2 x 16 KBytes, 8-way set associative, 64-byte line size *Trace cache (per processor)* 2 x 12 Kuops, 8-way set associative *L2 cache (per processor)* 2 x 1024 KBytes, 8-way set associative, 64-byte line size *Chipset & Memory* *Northbridge* ATI RS400/RC400/RC410 rev. 01 *Southbridge* ATI SB400 rev. 80 *Graphic Interface* PCI-Express *PCI-E Link Width* x16 *PCI-E Max Link Width* x16 *Memory Type* DDR *Memory Size* 1024 MBytes *Memory Frequency* 200.0 MHz (1:1) *CAS# Latency (tCL)* 3.0 clocks *RAS# to CAS# (tRCD)* 4 clocks *RAS# Precharge (tRP)* 0 clocks *Cycle Time (tRAS)* 8 clocks *System* *System Manufacturer* *System Name* *System S/N* *Mainboard Vendor* Intel Corporation *Mainboard Model* D101GGC *BIOS Vendor* Award BIOS for Intel *BIOS Version* GC11010N.86A.0311.2006.0420.1525 *BIOS Date* 04/20/2006 *Memory SPD* *Module 1* DDR, PC3200 (200 MHz), 512 MBytes, unknown brand *Module 2* DDR, PC3200 (200 MHz), 512 MBytes, Hyundai Electronics *Software* *Windows Version* Microsoft Windows XP Professional Service Pack 1 (Build 2600) *DirectX Version* 9.0c cpuz.htm Link to comment Share on other sites More sharing options...
ujen Posted March 17, 2008 Share Posted March 17, 2008 the iso image should be about 3.5gb Link to comment Share on other sites More sharing options...
komeet Posted March 17, 2008 Share Posted March 17, 2008 try to unzip the kalyway iso with the newest winrar version and burn it at the lowest speed. Loading Darwin/x86Ebios error read error: Error 0x32 Block8939856 Sectors 64 This error means the installer could not read the from the installation disk. Link to comment Share on other sites More sharing options...
Recommended Posts