Treyarch Posted March 11, 2008 Share Posted March 11, 2008 Hello, I've successfully install Leopard on my Asus G1S with the latest iATKOSv1.0r2+BadBios Patch, and updated with the 9.2 vanilla kernel. I thought everything worked fine until I noticed a small performance issue when I moved my Finder window around the desktop. There's a little lag, it's small but to be sure I ran XBench to check the performance of my laptop. I get around 74-76 points, the biggest score I got was 94 points. And there you go, it shows there's effectively a lack of performance. My iMac gets a score of 125 points and it's a bit under in terms of hardware compared to my laptop. Specs: iMac 2Gz, 2GB 667Mhz DDR2 SDRAM, 200GB 7200RMP, ATI Radeon HD2400 128MB Asus G1S T7500 2.2Ghz, 2GB 667Mhz DDR2 SDRAM, 160GB 5400RPM, NVIDIA Geforce 8600GT 256MB As you can see I should be getting around 140 points with my G1S, but there's something slowing it down. The BadBios patch from EquAte uses older Kexts to allow my laptop to boot, I'm not really sure but it's somewhat related to ACPI, could it be this slowing my laptop? I'll post the results from XBench later since I don't have them with me. Any help is really appreciated, thanks a lot ! Link to comment Share on other sites More sharing options...
Treyarch Posted March 11, 2008 Author Share Posted March 11, 2008 Here's a bench I did 3 mins ago : Results 109.05 System Info Xbench Version 1.3 System Version 10.5.2 (9C31) Physical RAM 2048 MB Model G1S Drive Type Hitachi HTS541616J9SA00 CPU Test 138.32 GCD Loop 259.25 13.67 Mops/sec Floating Point Basic 125.14 2.97 Gflop/sec vecLib FFT 101.86 3.36 Gflop/sec Floating Point Library 137.88 24.01 Mops/sec Thread Test 159.69 Computation 164.19 3.33 Mops/sec, 4 threads Lock Contention 155.43 6.69 Mlocks/sec, 4 threads Memory Test 147.08 System 154.66 Allocate 261.14 958.98 Kalloc/sec Fill 117.90 5732.74 MB/sec Copy 141.11 2914.55 MB/sec Stream 140.21 Copy 136.97 2829.09 MB/sec Scale 134.66 2782.12 MB/sec Add 145.73 3104.40 MB/sec Triad 144.09 3082.44 MB/sec Quartz Graphics Test 156.70 Line 128.06 8.53 Klines/sec [50% alpha] Rectangle 153.94 45.96 Krects/sec [50% alpha] Circle 125.66 10.24 Kcircles/sec [50% alpha] Bezier 142.45 3.59 Kbeziers/sec [50% alpha] Text 381.03 23.84 Kchars/sec OpenGL Graphics Test 130.33 Spinning Squares 130.33 165.33 frames/sec User Interface Test 164.27 Elements 164.27 753.92 refresh/sec Disk Test 42.09 Sequential 73.58 Uncached Write 74.58 45.79 MB/sec [4K blocks] Uncached Write 56.06 31.72 MB/sec [256K blocks] Uncached Read 97.01 28.39 MB/sec [4K blocks] Uncached Read 78.08 39.24 MB/sec [256K blocks] Random 29.47 Uncached Write 10.52 1.11 MB/sec [4K blocks] Uncached Write 60.74 19.45 MB/sec [256K blocks] Uncached Read 69.33 0.49 MB/sec [4K blocks] Uncached Read 102.62 19.04 MB/sec [256K blocks] Of course this makes me lie about bad results since I got 109 points which is more than fair. I tend to think XBench results are really random. Any reason for this? Link to comment Share on other sites More sharing options...
Treyarch Posted March 13, 2008 Author Share Posted March 13, 2008 I compared with my iMac and it seems that my Graphic Card could be the problem. My iMac has an ATI HD2400 with 128MB and is doing much better than my Geforce 8600M 256MB. I'm currently using the NVInject installer v33, should I try using another package or are there any tweaks I could do to improve performance? Link to comment Share on other sites More sharing options...
Recommended Posts