Kejon1 Posted February 29, 2008 Share Posted February 29, 2008 whenever i put in both cards (i plug in the little connector between both cards) i get just dark screens and nothing else. if i take out one, i get perfect output to the one card that's left in and both monitors plugged to both dvi outputs work just fine. It works with QE supported/CI hardware accelerated I would like to get the two cards working sli or not so i can plug in a third monitor and a projetor. specs: k8n-sli deluxe both cards: 8600gts 256mb 720MHz mobo chipset: nforce4 that's all info needed. Link to comment Share on other sites More sharing options...
Krazubu Posted February 29, 2008 Share Posted February 29, 2008 SLI is not supported by apple (either officially or not), so no way. About having both card working (with SLI link removed), it should be OK using the right injecter with correct parameters, you should find more infos searching in this forum Link to comment Share on other sites More sharing options...
Kejon1 Posted February 29, 2008 Author Share Posted February 29, 2008 SLI is not supported by apple (either officially or not), so no way.About having both card working (with SLI link removed), it should be OK using the right injecter with correct parameters, you should find more infos searching in this forum i tried searching, but I couldn't find exactly what I needed. but what do you mean by the right injector? I'm going to go and try if I could just insert the card without the link alone and see if it works. Link to comment Share on other sites More sharing options...
Spotta Posted February 29, 2008 Share Posted February 29, 2008 Thats good news, I also run two gfx cards with 3 monitors in XP and Vista and wondered if I was able to do this in OSX - I look forward to finding out how! Spotta Link to comment Share on other sites More sharing options...
Recommended Posts