Sander122 Posted February 25, 2008 Share Posted February 25, 2008 Hello! I've tried like 8 different install disks now (tiger & leopard), none of them worked.. I got Kalyway 10.5.1 now on DVD, I tried to boot it and I got: panic(cpu 3 caller 0x00192754): "pmap_flush_tlbs( ) timeout: " "cpu 1 failing to respond to interrupts, pmap = 0x538180 cpus_to_sinal=7"@/Volumes/disk1s2/leo_xnu/xnu-1228/i386/pmap.c: 4569 ( I wrote it on paper, couldn't find a camera, so it can contain some typos ) With 3/4 of the install disks I get this error.. What's wrong? Link to comment https://www.insanelymac.com/forum/topic/90043-cpu-kernel-panic/ Share on other sites More sharing options...
Xenova Posted February 25, 2008 Share Posted February 25, 2008 Hello! I've tried like 8 different install disks now (tiger & leopard), none of them worked.. I got Kalyway 10.5.1 now on DVD, I tried to boot it and I got: panic(cpu 3 caller 0x00192754): "pmap_flush_tlbs( ) timeout: " "cpu 1 failing to respond to interrupts, pmap = 0x538180 cpus_to_sinal=7"@/Volumes/disk1s2/leo_xnu/xnu-1228/i386/pmap.c: 4569 ( I wrote it on paper, couldn't find a camera, so it can contain some typos ) With 3/4 of the install disks I get this error.. What's wrong? When you boot from the disk press F8 as it says, then where it says boot type -v cpus=1 that might work, worked for me but i am using iATKOSv1.0ir2... i haven't used Kalyway yet. But in in verbose mode you should see what its doing, note down any other errors it might give. Hopefully it will be nice. Xenova Link to comment https://www.insanelymac.com/forum/topic/90043-cpu-kernel-panic/#findComment-642358 Share on other sites More sharing options...
Sander122 Posted February 25, 2008 Author Share Posted February 25, 2008 Thanks, I got a little further with cpus=1, now I get "Still waiting for root device".. Link to comment https://www.insanelymac.com/forum/topic/90043-cpu-kernel-panic/#findComment-642382 Share on other sites More sharing options...
Xenova Posted February 25, 2008 Share Posted February 25, 2008 Thanks, I got a little further with cpus=1, now I get "Still waiting for root device".. Gald to hear it. What is your system spec? 'Still waiting for root device' usually means that its waiting for a drive that is not compatible, If you use a SATA drive, try and use an IDE Harddisk, if that fails, try using an IDE Harddisk and DVD-ROM set as Master/Slave on the device jumpers. That worked for me, 'cause my Nforce SATA was not compatible. Have a shuffle around inside your computer to see whats what, but your specs would be helpful. Link to comment https://www.insanelymac.com/forum/topic/90043-cpu-kernel-panic/#findComment-642506 Share on other sites More sharing options...
Sander122 Posted February 25, 2008 Author Share Posted February 25, 2008 I've made a Everest Home Edition report (very long): Click here Here is some basic info: It is a "Microstar" PC, a sub-company of Medion (I think). Processor: Intel Core 2 Quad Q6600 RAM: 2GB 667Mhz Motherboard: MS-7358 = Q35MDO (Found it on Google, not 100% sure) Chipset: ICH9 Graphics Card: Nvidia 8500GT (soon 8800GT) Link to comment https://www.insanelymac.com/forum/topic/90043-cpu-kernel-panic/#findComment-642569 Share on other sites More sharing options...
Sander122 Posted February 26, 2008 Author Share Posted February 26, 2008 Bump Link to comment https://www.insanelymac.com/forum/topic/90043-cpu-kernel-panic/#findComment-644661 Share on other sites More sharing options...
KirbySaysHi Posted February 26, 2008 Share Posted February 26, 2008 I believe, but I'm not sure, that 10.5 likes to boot off of a sata hard drive. I'm not sure about that. I DO know that people get still waiting for root device when booting from a dvd-rom drive that uses pata. However, this could all be specific to my board. Could also be a BIOS setting... but I don't know which. You could try playing around with any that involve IDE or SATA. Just jot down the original settings so you can put them back for XP ! Link to comment https://www.insanelymac.com/forum/topic/90043-cpu-kernel-panic/#findComment-644843 Share on other sites More sharing options...
Software Updater Posted February 27, 2008 Share Posted February 27, 2008 Actually some hate SATA like Kalway. I all depends. Link to comment https://www.insanelymac.com/forum/topic/90043-cpu-kernel-panic/#findComment-645636 Share on other sites More sharing options...
Recommended Posts