~pcwiz Posted March 21, 2008 Author Share Posted March 21, 2008 MDW2, IDE does work in Kalyway so Yes. The only thing is that it doesn't support booting from IDE DVD drives, but since you have a SATA DVD drive it shouldn't be a problem. Link to comment https://www.insanelymac.com/forum/topic/89300-documentation-for-kalyway-1051-dvd/page/2/#findComment-676498 Share on other sites More sharing options...
MDW2 Posted March 21, 2008 Share Posted March 21, 2008 IDE does work in Kalyway so Yes. The only thing is that it doesn't support booting from IDE DVD drives, but since you have a SATA DVD drive it shouldn't be a problem. I would buy second SATA disk if you didn't answer me. So thank you for fast answer. I don't know why I can't boot my Hackintosh. If I try boot, I see only whit cursor on black background. I have installed MacOSX (Kalyway 10.5.1). When I press F8 during boot DVD, there aren't this disk on the list boot devices. I see IDE disk in installer, can install MacOSX (MBR) but I don't see this disk in "Startup Disk" Do you know why? Could you help me? MDW Link to comment https://www.insanelymac.com/forum/topic/89300-documentation-for-kalyway-1051-dvd/page/2/#findComment-676517 Share on other sites More sharing options...
tripkip Posted March 21, 2008 Share Posted March 21, 2008 NO kalyway was no sussess either, but the install looked a lot nicer i must admit... I'll try installing it on a different disc in stead of a different partition... - If i'm correct i will be able to use MBR in that case ( is MBR better compatible with Vista?) greets Link to comment https://www.insanelymac.com/forum/topic/89300-documentation-for-kalyway-1051-dvd/page/2/#findComment-676615 Share on other sites More sharing options...
Hilaly Posted March 21, 2008 Share Posted March 21, 2008 Thank you very much pcwiz for this great tutorial. I tried several times to install iAKTOS Leopard with no success. Then I got a copy of Kalyway and were fortunate to find your tutorial. I had three failing attempts to install it but finally it is installed smoothly on my laptop with the upadates too. Link to comment https://www.insanelymac.com/forum/topic/89300-documentation-for-kalyway-1051-dvd/page/2/#findComment-676646 Share on other sites More sharing options...
~pcwiz Posted March 21, 2008 Author Share Posted March 21, 2008 MDW2, Did you format and partition as HFS+ and try MBR instead of GUID with only EFI and vanilla options and nothing else? tripkip, If you are installing to a different drive MBR will work fine (thats what I used) Hilaly, You're welcome, no problem Link to comment https://www.insanelymac.com/forum/topic/89300-documentation-for-kalyway-1051-dvd/page/2/#findComment-676804 Share on other sites More sharing options...
Mad Professor Posted May 13, 2008 Share Posted May 13, 2008 Hello and thanks for the guide. I was stumbling around with the included Kalyway doc. I'm an old Amiga guy and I have been doing lots of PC stuff since. I have my own little server farm, 20+ machines. I have a few real Macs, but this was my first go at a Hackintosh. By the way, I had no problems at all booting form an IDE DVD on this system. Specs are in my sig. I might try this on one of my laptops next. We'll see how it goes. Thanks Again! Link to comment https://www.insanelymac.com/forum/topic/89300-documentation-for-kalyway-1051-dvd/page/2/#findComment-745196 Share on other sites More sharing options...
alamoa Posted May 13, 2008 Share Posted May 13, 2008 Well done PCWiz, very useful. What about including some terminal commands for the newbies? Link to comment https://www.insanelymac.com/forum/topic/89300-documentation-for-kalyway-1051-dvd/page/2/#findComment-745368 Share on other sites More sharing options...
~pcwiz Posted May 14, 2008 Author Share Posted May 14, 2008 Mad Professor, Cool, glad you got it working and with an IDE drive! alamoa, Sure, what kind of Terminal commands? Some of the basics (installing kexts and kernels) are covered in my Newbies FAQ to OSx86 (stickied in Tutorials forum). Link to comment https://www.insanelymac.com/forum/topic/89300-documentation-for-kalyway-1051-dvd/page/2/#findComment-745974 Share on other sites More sharing options...
rimmi2002 Posted May 30, 2008 Share Posted May 30, 2008 Is there a similar guide for the KAlyway 10.5.2 DVD. Link to comment https://www.insanelymac.com/forum/topic/89300-documentation-for-kalyway-1051-dvd/page/2/#findComment-764452 Share on other sites More sharing options...
~pcwiz Posted May 30, 2008 Author Share Posted May 30, 2008 No not yet I don't think, at least I'm not planning one. Most of this probably should apply to Kalyway 10.5.2, minus the drivers and all. Link to comment https://www.insanelymac.com/forum/topic/89300-documentation-for-kalyway-1051-dvd/page/2/#findComment-764792 Share on other sites More sharing options...
kinkster Posted June 4, 2008 Share Posted June 4, 2008 If im in Disk Utility trying to set up partitions etc but it doesn't list my hard drive what should I do? Link to comment https://www.insanelymac.com/forum/topic/89300-documentation-for-kalyway-1051-dvd/page/2/#findComment-770206 Share on other sites More sharing options...
Zlash Posted July 12, 2008 Share Posted July 12, 2008 same here Link to comment https://www.insanelymac.com/forum/topic/89300-documentation-for-kalyway-1051-dvd/page/2/#findComment-816876 Share on other sites More sharing options...
borgsquad Posted July 14, 2008 Share Posted July 14, 2008 Yea. I'm having the same problem here. In my machine i have 2 SATA hard disk and 1 blank IDE hard disk SATA1 has 2 partitions and 1 of it is my Windows boot partition. Both are NTFS filesystem. SATA2 has 3 partitions and all formatted with NTFS. IDE hard disk was just added and it is blank (No partitions). When I attempt to install Kalyway, the Disk Utility detected the 2 SATA hard disk and not the IDE hard disk. Anyone have a solution? I also tried to use the Terminal to locate my disk but when I open the Terminal, my keyboard just doesn't work at all. (Microsoft keyboard). Any help is highly appreciated. Link to comment https://www.insanelymac.com/forum/topic/89300-documentation-for-kalyway-1051-dvd/page/2/#findComment-818642 Share on other sites More sharing options...
Kimox Posted August 4, 2008 Share Posted August 4, 2008 Hi, I've made a 5 page documentation for the Kalyway 10.5.1 DVD that explains all the preinstallation, installation, and post installation process. I don't have the DVD myself but I have an accurate enough representation to make the documentation. Main source was the Kalyway release thread but I did add a lot of bits of my own It explains clearly for any n00bs that plan on using it The 44kb PDF is attached and I hope you find it useful. Please take a look and tell me what you think, before I zip it up and release it to the whole wide public Changelog: KalywayDOCSV3 (new file attached) Added a big note at the top in bold that the Kalyway DVD takes a long time to boot KalywayDOCSV2 (new file attached) Added a couple lines on how to Repair Permissions I follow these spteps from pdf's and my OSX Leopard installed but i can not boot without DVD inside, how can i make it boot itself Link to comment https://www.insanelymac.com/forum/topic/89300-documentation-for-kalyway-1051-dvd/page/2/#findComment-844926 Share on other sites More sharing options...
Recommended Posts