Scarfaced78 Posted February 7, 2008 Share Posted February 7, 2008 Hallo zusammen, habe mir mal das Iatkos iR2 gezogen und sauber auf DVD gebrannt. Vorgehensweise bisher: Im Bios boot per USB DVD Device eingestellt - bootet sauber Im Menü " select Destination" taucht keine meiner 2 leeren Platten auf (2x 80GB WD Caviar) auch im Menü Disk Utilities NICHT Ich habe die Platten per Gparted FAT32 formatiert und eine als MBR geflaggt ich weiss nicht was ich machen soll dass er eine der Platten findet. schaut euch die pics an die ich angehängt habe... danke für eure Vermutungen zur Lösung des Problems Scar Link to comment https://www.insanelymac.com/forum/topic/86317-iatkos-ir2-probleme-pls-advice/ Share on other sites More sharing options...
riws Posted February 7, 2008 Share Posted February 7, 2008 Erstelle auf die Platte eine AF Partition in Windows mit Hilfe von DISKPART, so müsste es am besten für OSX zu sehen sein create partition primary id=af Link to comment https://www.insanelymac.com/forum/topic/86317-iatkos-ir2-probleme-pls-advice/#findComment-612583 Share on other sites More sharing options...
Scarfaced78 Posted February 7, 2008 Author Share Posted February 7, 2008 Das funktioniert leider auch nicht... andere Ideen?? ich müsste doch eine OTB Festpaltte dranhängen können? welche formatierung erkennt OSX denn am ehesten wenn ich aus Gparted heraus formatiere?? Ich habe auf der Platte keine Partitionen... die ist clean 80GB FAT32 formatiert ... und der Mistkerl will Sie nicht erkennen... muss ich evtl was im Bios umstellen? Mange Takk Scar im US part des Forums, kam dieser Gedanke auf... "well, sounds like a driver/kext for your board is missing on the iatkos dvd. it has a ich7r southbridge, so maybe kalyways install dvd will help you out. it has ich-whatever support, and also jmicron... whatever, if this fails, probably the easiest way to get this run is buying a sata drive and setting SATA mode to AHCI in bios." mmh any suggestions?? ich probier gleich mal die Kalyway Variante aus... Link to comment https://www.insanelymac.com/forum/topic/86317-iatkos-ir2-probleme-pls-advice/#findComment-612648 Share on other sites More sharing options...
Scarfaced78 Posted February 7, 2008 Author Share Posted February 7, 2008 Mein Mainboard ist ein ASUS p5ld2 deluxe mit folgenden Eigenschaften... Intel ICH7R Southbridge: - 1 x UltraDMA 100/66/33 - 4 x Serial ATA (3Gb/s) - RAID 0, RAID 1, RAID 5, RAID 10 and Intel Matrix Storage technology. ITE 8211F controller: - 2 x UltraDMA 133 support four hard drives Chipset Intel 945P Intel ICH7R habe meine Platten wie gesagt nur über IDE nicht über SATA laufen, kann das das Problem sein das Iatkos beim anzeigen des Volumes bzw bei der Auswahl des Zielverzeichnisses zum installieren NICHTS anzeigt... kennt noch jemeand eine Möglichkeit Fehlerursachenforschung zu betreiben..?? evtl USB Platte ?? Thx a lot Scar Link to comment https://www.insanelymac.com/forum/topic/86317-iatkos-ir2-probleme-pls-advice/#findComment-612765 Share on other sites More sharing options...
rschultz101 Posted February 7, 2008 Share Posted February 7, 2008 pld2r-vm 2.0 ,...kalyway - iatkos, celeron, geht nicht, - core 2 duo cpu gakauft, - bios upadate - sata platten - kalyway installiert, 7600gs, EFI, sleep/wake works,... auf ide, muesste es ja klappen, vielleicht im bios modes veraendern, und mal mit einer platte ausprobieren,... Link to comment https://www.insanelymac.com/forum/topic/86317-iatkos-ir2-probleme-pls-advice/#findComment-612880 Share on other sites More sharing options...
Recommended Posts