Jump to content
9 posts in this topic

Recommended Posts

Intel DP35DP

e6600

2GB DDR2 800

ASUS x1950

Xbench: 146.37

Beekbench: 3272 MAC / 2749 Vista

 

Sigmatel 9271D (Taruga) link below

ASUS x1950 (Bronya) link below

Intel netcard disabled in BIOS and replaced with generic Realtek 8139D

 

HARD DISK SETUP !!!

 

SATA0 = HDD 1 MAC

SATA1 = DVD-ROM

SATA2 = HDD 2 Vista

 

After Install...

BOOT FIX...(under Install Boot-CD open Terminal from menu)

Terminal commands...

FDISK -e -u /dev/disk0

WRITE

F 1

-Reset system now...wait for Leopard load up with DVD and remove DVD...Reset

 

Audio Install:

Replace: ALCinject.kext & AppleHDA.kext

Where: Your HDD/System/Library/Extensions

Terminal commands...

sudo -s

(your password)

sudo chmod -R 755 /system/library/extensions/ALCinject.kext

sudo chown -R root:wheel /system/library/extensions/ALCinject.kext

sudo chmod -R 755 /system/library/extensions/AppleHDA.kext

sudo chown -R root:wheel /system/library/extensions/AppleHDA.kext

-Reset system now...

 

If dont have password you must setup one OK...

 

Leopard boots automatic or press F10 for Bios BOOT MENU to boot from other HDD/DVD/USB drive.

 

BIOS BOOT MENU:

ABIT ESC

Asus F8

ASRock F11

Biostar F9

Intel F10

MSI F11

DELL F12

Gateway ESC or F10

Packard Bell ESC or F8

ABIT IP35 (dont have bios boot menu).

You can try any of F1 to F12 and ESC can work...some of this keys may start Recovery (laptops)

or start your system BIOS with Default options.

 

Big thanks to iATKOS,Taruga,Bronya :)

and many others...

 

 

Taruga (alot Audio support here)

http://forum.insanelymac.com/index.php?sho...mp;#entry560580

 

Bronya (ATi support here)

http://forum.insanelymac.com/index.php?showtopic=58988

 

macaa2.th.jpg

 

Bios logo i made and it works...

logoug4.th.jpg

 

Logo for desktop if you wont...

universalbinarylogotu7.th.jpg

 

Mac Girl desktop wallpaper...

mgirltb9.th.jpg

 

Boot FIX Trick...resolved

 

FDISK -e -u /dev/disk0

WRITE

F 1

 

If First time dont work reset system with DVD and wait to Leopard opens UP...dont press any key while DVD boot !!! and wait some time and reset and go to DVD install again and enter the Fdisk commands again reset...

Wait to Leopard Load up with DVD again and remove DVD and reset system...NOW it will Work.

  • 2 weeks later...
  • 3 weeks later...
  • 3 weeks later...

Hello. I installed iATKOS MAC OS X and Vista togather with this guide: http://inihilist.wordpress.com/2008/01/07/...of/#comment-739

 

it works normally. but i cand get my Sound card to work (its on PCI slot) and it has mac drivers, which I installed.

And theres no internet. It shows that the cable is unpluged (it integrated ethernet)

 

my mobo is DP35DP

CPU Core2Quad

video gigabyte 8600GTS which works fine with NVInject v33

 

please help me.

  • 5 months later...
  • 1 month later...

Hi There,

 

I have almost the same configuration.

 

Intel Core 2 Quad Q6600, 2,4 GHz, LGA775

Intel DragontailPeak S775 P35 ATX (BOXDP35DPM)

4GB 800MHZ DDR2 NON-ECC CL5 (5-5-5-15)

HP NVIDIA Quadro FX 370 256 MB Top Value

2x Hitachi P7K500 250 GB SATA-II 8MB (24x7)

LG GH20NS dvd-writer

 

After the install i get a grey screen with apple logo and a circle (like a stop sign).

I have tried all kinds of differtent installations with the Iatkos iV4 and sometimes i get a "turn of system and reboot" message.

 

But never got to the 2nd installations process.

Only the first.

 

Can somebody give me tips what to do?

 

With kind regards,

Strange, i have got the Kaylway working but not Iatkos!? :S

 

Kaylway runs, but with no sound and i think the NVIDIA Quadro FX 370 isn't really that compatible.

I mean, it looks good and doens't stutter, but i am not sure if the driver works propperly.

×
×
  • Create New...