willowhaven Posted November 21, 2007 Share Posted November 21, 2007 Okay...I am having a problem. I loaded the Uphuck 10.4.9 v3 disk, and it seems to install successfully if I don't install any patches or drivers (If I load the drivers then I get it loops an error message that has something to do with the library, so I decided to do it as the base and work my way through the drivers and patches until I figure out what is crashing it.)...but...when I load it (both using the SSE2 and SSE3 kernels, one at a time to see which one works, but only one is loaded each time) it enters into a white screen with the Apple logo and a spinning grey ciricle. I am unsure as to what I am doing wrong. Is there something I need to change in the setup? Please let me know if there is anything you think of that I am doing wrong. BTW, this is a HP Pavilion zv6131us laptop model and here are the specs: US Product Number: EC358UA#ABA Microprocessor: 2.0GHz AMD Athlon™64 Processor 3200+ with PowerNow!™ Technology Microprocessor Cache: 512KB L2 Cache Memory: 512MB 333MHz DDR System Memory (2 Dimm) Memory Max: 2048MB Video Graphics: ATI RADEON® XPRESS 200M IGP Video Memory: 128MB DDR (dedicated) Hard Drive: 100GB (4200RPM) Hard Drive Diskette Drive: None Multimedia Drive: DVD±R/RW and CD-RW Combo Drive with Double Layer Support Display: 15.4" WXGA High-Definition BrightView Widescreen (1280 x 800) Display Fax/Modem: high speed 56k modem Network Card: Integrated 10/100BASE-T Ethernet LAN (RJ-45 connector) Wireless Conectivity: 54g™ 802.11b/g WLAN with 125HSM / SpeedBooster™ and BroadRange™ support Sound: Altec Lansing Keyboard: 101-key compatible & 3 Quick Launch Bottons Pointing Device: Touch Pad with On/Off button and dedicated vertical and horizontal Scroll Up/Down pad PC Card Slots: 1 ExpressCard/54 Slot (also supports ExpressCard/34) 1 Type I/II 32-bit card bus (also support 16-bit) External Ports: 4 Universal Serial Bus USB 2.0 1 VGA (15-pin) 1 RJ-11 (modem) 1 TV-Out (S-video) 1 RJ -45 (LAN) 1 Expansion Port 2 connector 1 headphone-out 1 microphone-in 1 IEEE 1394 Firewire (4-pin) Consumer IR (Remote Receiver) Power: 120W AC adapter 8-Cell Lithium-Ion (65Whr) From Windows Device Manager: Batteries: Microsoft AC Adapter Microsoft ACPI-Compliant Control Method Battery Computer: ACPI Uniprocessor PC Disk Drives: FUJITSU MHU2100AT Display Adapters: ATI MOBILITY RADEON Xpress 200 Series DVD/CD-ROM Drives: HL-DT-ST DVD-RW GCA-4080N IDE ADA/ATAPI Controllers: Primary IDE Channel Secondary IDE Channel Standard Dual Channel PCI IDE Controller IEEE 1394 Bus Host Controllers: Texas Instruments OHCI Compliant IEEE 1394 Host Controller Keyboards: Quick Launch Buttons Mice and Other Pointing Devices: Synaptics PS/2 Port TouchPad Modems: AC97 Data Fax SoftModem with SmartCP Monitors: Default Monitor Default Monitor Plug and Play Monitor Network Adapters: 1394 Net Adapter Broadcom 802.11b/g WLAN Realtek RTL8139/810x Family Fast Ethernet NIC PCMCIA Adapters: Texas Instruments PCIxx21/x515 Cardbus Controller PCMCIA and Flash Memory Devices: Texas Instruments PCIxx21 Integrated FlashMedia Controller Processors: AMD Athalon™ 64 Processor 3200+ Secure Digital Host Controllers: SDA Standard Compliant SD Host Controller Sound, Video, and Game Controllers: Audio Codecs Conexant AC-Link Audio Legacy Audio Drivers Legacy Video Capture Devices Media Control Devices Video Codecs System Devices: ACPI Fixed Feature Button ACPI Lid ACPI Power Button ACPI Thermal Zone ATI SMBus Direct Memory Access Controller ISAPNP Read Data Port Microcode Update Devide Microsoft ACPI-Compliant Embedded Controller Microsoft ACPI-Compliant System Microsoft Composite Battery Microsoft System Management BIOS Driver Microsoft Windows Management Interface for ACPI Motherboard Resources Motherboard Resources Numeric Data Processor PCI Bus PCI Standard Host CPU Bridge PCI Standard Host CPU Bridge PCI Standard Host CPU Bridge PCI Standard Host CPU Bridge PCI Standard Host CPU Bridge PCI Standard ISA Bridge PCI Standard PCI-to-PCI Bridge PCI Standard PCI-to-PCI Bridge PCI Standard PCI-to-PCI Bridge Plug and Play Software Device Enumerator Programmable Interrupt Controller System Board System CMOS/Real Time Clock System Speaker System Timer Terminal Service Device Redirector Universal Serial Bus Controllers: Standard Enhanced PCI to USB Host Controller Standard OpenHCD USB Host Controller Standard OpenHCD USB Host Controller USB Root Hub USB Root Hub USB Root Hub Thanks all for the help! Jennifer Link to comment Share on other sites More sharing options...
ajhutton Posted November 26, 2007 Share Posted November 26, 2007 Hi, Try and press F8 just after the bios. Then type -v and see what the message is when it stops. Then post the exact error here. Also try and press F8 and type -x -s and see if that works. Hope this helps. - Alex Link to comment Share on other sites More sharing options...
willowhaven Posted November 26, 2007 Author Share Posted November 26, 2007 Hi, Try and press F8 just after the bios. Then type -v and see what the message is when it stops. Then post the exact error here. Also try and press F8 and type -x -s and see if that works. Hope this helps. - Alex Thanks for the help. I ended up figuring out the problem. For some odd reason I had to install the generic kernel rather than the AMD one. As soon as I tried that out of desperation, we had Mac. LOL Jennifer Link to comment Share on other sites More sharing options...
Recommended Posts