Detosx Posted October 25, 2007 Share Posted October 25, 2007 Motherboard P5VD2-MX (my Asrock setup works perfectly, by the way!) JAS, all flavours - no joy: sata hard drive not visible Kelaway 10.4.10 - no joy: sata hard drive not visible to installer Uphuck - almost, using r14 rev2 - very excited at that point - installs... but... kernal panic freeze during boot from hard drive Uphuck r1.4 rev3 - no joy: sta hard drive not visible to installer With the exception of Uphuck r1.4 rev2 none of the OS X modded install DVDs see my sata drive, either through the regular Sata or the Jmicron. Has anyone tried making an editable ISO and putting in vendor IDs? I met someone who did but I couldn't understand his instructions, found elsewhere on this board. A hell of a lot of people used this board because it was dirt cheap, would be good to know! Many, many thanks if anyone knows The motherboards spec:- VIA P4M890 VIA VT8237A 1 x PCI-E x 16 1 x PCI-E x 1 2 x PCI (Note: PCI-E x 1 and JMicron JMB363 SATA controller can not be used simultaneously) VGA VIA 8237A South Bridge: *2 x UltraDMA 133/100/66/33 *2 x Serial ATA with RAID 0, 1, JBOD function JMicron JMB363 SATA controller: *1 x Internal Serial ATA 3 Gb/s *1 x External Serial ATA 3 Gb/s (SATA On-the-Go) *supports RAID 0, 1 & JBOD LAN Realtek RTL8201CL 10/100 LAN Controller Audio High Definition Audio, ADI AD1986A SoundMAX 6-channel CODEC 1 x Parallel 1 x External SATA 1 x VGA Port 1 x PS/2 Keyboard 1 x PS/2 Mouse 1 x RJ45 4 x USB 2.0/1.1 6-Channel Audio I/O Internal I/O Connectors Link to comment https://www.insanelymac.com/forum/topic/67666-has-anyone-got-sata-to-work-with-any-os-x-on-asus-p5vd2-mx/ Share on other sites More sharing options...
ad5665 Posted December 18, 2007 Share Posted December 18, 2007 im the same place as u i have sort of giving up on it and might get a new MB Link to comment https://www.insanelymac.com/forum/topic/67666-has-anyone-got-sata-to-work-with-any-os-x-on-asus-p5vd2-mx/#findComment-542613 Share on other sites More sharing options...
Detosx Posted January 5, 2008 Author Share Posted January 5, 2008 For those searching! iATKOS was able to see my P5VD2-MX's Sata drive to install to it but I went no further so can't tell you if it would boot without problems, though I imagine it would. Instead I installed Kalyway 10.5.1 and it worked fine. Using the Pentium D processor I wasn't able to install the Vanilla kernel but that's go great loss. Things are up and running on GUID and I'm quite happy. Taruga's AD1968 sound installer didn't work for me. Some experimentation to find which of the Sata sockets would work but an easy install. I though you would still need a graphics card but I use an old PNY Geforce 7300 and it works fine when selected during install. It has been a long wait! Champagne corks? Link to comment https://www.insanelymac.com/forum/topic/67666-has-anyone-got-sata-to-work-with-any-os-x-on-asus-p5vd2-mx/#findComment-566816 Share on other sites More sharing options...
MacIntelOSh Posted January 5, 2008 Share Posted January 5, 2008 For those searching! iATKOS was able to see my P5VD2-MX's Sata drive to install to it but I went no further so can't tell you if it would boot without problems, though I imagine it would. Instead I installed Kalyway 10.5.1 and it worked fine. Using the Pentium D processor I wasn't able to install the Vanilla kernel but that's go great loss. Things are up and running on GUID and I'm quite happy. Taruga's AD1968 sound installer didn't work for me. Some experimentation to find which of the Sata sockets would work but an easy install. I though you would still need a graphics card but I use an old PNY Geforce 7300 and it works fine when selected during install. It has been a long wait! Champagne corks? Interesting that you managed to install using the Kalyway 10.5.1 installer - I tried it with no success on a PC with this m/b. Am downloading the Aitkos installer at the moment as it's the only one I haven't tried as yet. The TOH rc2 went well but wasn't able to see the FAT32 partion I had made for it. Link to comment https://www.insanelymac.com/forum/topic/67666-has-anyone-got-sata-to-work-with-any-os-x-on-asus-p5vd2-mx/#findComment-567075 Share on other sites More sharing options...
MacIntelOSh Posted January 8, 2008 Share Posted January 8, 2008 iAtkos didn't work either - kept getting stuck after a load of text with a message that reads something like '.. failed after 2 attempts. We are going backwards here!'. Or something very similar. Anyway - you cannot change the the SATA to IDE in the BIOS (Pheonix Bios), so I think this mobo is pretty much useless to use with SATA. However, in the TOH rc2 that I did manage to get to the installer page in Mac OSX setup, I looked on the system profiler and saw that there were no SATA devices listed BUT it listed both my IDE DVD drives. So I assume that this board might work with an IDE drive. Has anyone managed to get this mobo working with an IDE drive?? (I would try it myself but I don' have a IDE drive to hand!). Link to comment https://www.insanelymac.com/forum/topic/67666-has-anyone-got-sata-to-work-with-any-os-x-on-asus-p5vd2-mx/#findComment-570894 Share on other sites More sharing options...
aibonlengket Posted January 13, 2008 Share Posted January 13, 2008 I used Kalyway 10.5.1 installer on this motherboard. I have 7300 LE and use natit. it work with quartz. the problem were no sound and ethernet didn't work. when i install i check mark the wifi ethernet. don't know if that was the case. i did not use sata or test it, because i don't have any hardisk with sata. has anyone got the sound and the ehternet working?? Link to comment https://www.insanelymac.com/forum/topic/67666-has-anyone-got-sata-to-work-with-any-os-x-on-asus-p5vd2-mx/#findComment-577054 Share on other sites More sharing options...
Recommended Posts