sevenstars_okawari Posted July 29, 2007 Share Posted July 29, 2007 I have tried to install with the following installer a few times . *10.4.9 v1.3 *10.4.10 AMD *10.4.8 AMD Final But in the middle of the installation status, it shuts down suddenly(or sometimes it give me "Kernel Panick Error".) Yus, I have never been that it boots from HDD... Please advise me if you have any ideas to install completely!! Here is my equipment. CPU...AMD +4200 Athlon 64x2 Mother board...AM2NF3-VSTA(According to 8X6, it should be working properly) http://www.asrock.com/mb/overview.asp?Model=AM2NF3-VSTA Graafic Board...ASUS/n6200 http://www.asus.com.tw/products4.aspx?l1=2...amp;modelmenu=1 Link to comment Share on other sites More sharing options...
sevenstars_okawari Posted July 30, 2007 Author Share Posted July 30, 2007 I enter "-x", "-v" and "-x -v" when Derwin 86 runs. But the problem is same, nothing different. Link to comment Share on other sites More sharing options...
sevenstars_okawari Posted July 30, 2007 Author Share Posted July 30, 2007 Someone help me!! I have entired "cpus=1", but it still happens...: Link to comment Share on other sites More sharing options...
hecker Posted July 30, 2007 Share Posted July 30, 2007 It sounds like a memory or heat problem to me. Make sure you are not overclocking your memory (BIOS) and try to find out if something (probably CPU) requires better ventilation. Cheers, hecker Link to comment Share on other sites More sharing options...
sevenstars_okawari Posted July 31, 2007 Author Share Posted July 31, 2007 Thank you for your prompt reply... I removed my grafic card and inserted again properly. Then I can. I don know, that's that cause? Anyway... Thanks!! Link to comment Share on other sites More sharing options...
Recommended Posts