igor_medeiros Posted July 14, 2007 Share Posted July 14, 2007 hi all using here jas 10.4.8 on a toshiba satellite p100-209 laptop with nvidia geforce 7600go. installed last 7600go diabolik v2 and tried svideo & vga out without sucess. maybe diabolik's kexts are dvi out only? but anyone had luck using 7600go out in any way? dvi/svideo/vga ??? thx in advance igor bash-3.1# lspci 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) 00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port (rev 03) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02) 00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02) 01:00.0 VGA compatible controller: nVidia Corporation G70 [GeForce Go 7600] (rev a1) 02:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller 03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02) 0a:04.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller 0a:04.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller 0a:04.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) 0a:04.3 Generic system peripheral [0805]: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller 0b:00.0 Multimedia controller: Motorola DSP56361 Digital Signal Processor (rev 01) EDIT: now s-video out working. dual display! i think paperclip is for another videocard, not nvidia. Link to comment https://www.insanelymac.com/forum/topic/57127-anyone-using-7600go-dual-display/ Share on other sites More sharing options...
sAINT30D Posted July 15, 2007 Share Posted July 15, 2007 i think you may have to do a trick with a paper clip http://diabolik1605.com/DHF/iNVidia.html its on there Link to comment https://www.insanelymac.com/forum/topic/57127-anyone-using-7600go-dual-display/#findComment-408413 Share on other sites More sharing options...
Mklome2 Posted July 23, 2007 Share Posted July 23, 2007 i think you may have to do a trick with a paper clip http://diabolik1605.com/DHF/iNVidia.html its on there hello there. i've got same problem with 7600 go, no working on main display.... this link is for the download page of the diabolik's drivers.... please explain what is the trick, if there is one. Thankx Link to comment https://www.insanelymac.com/forum/topic/57127-anyone-using-7600go-dual-display/#findComment-413419 Share on other sites More sharing options...
kae Posted July 23, 2007 Share Posted July 23, 2007 Same problem here, would love a solution for this. The paperclip trick is for getting the internal monitor to work isn't it ? Link to comment https://www.insanelymac.com/forum/topic/57127-anyone-using-7600go-dual-display/#findComment-413533 Share on other sites More sharing options...
Recommended Posts