atomikramp Posted February 26, 2007 Share Posted February 26, 2007 (edited) Hi all... I beg to you for some help becouse i dunno how to solve this problem. I dlded the JaS OSX Release for SSE2 & SSE3 for AMD and intel... i burned it and tried to boot from the DVD... What a luck i said when i noticed that i could perform a native installation.. the installer started up and allowed me to complete the installation without any problem.. But after the reboot the bad surprise... if i boot it up normally i get a nice Kernel panic related to something about CPU ids and such. If i boot it with the -x option it boots up... but it boots up without any driver.. and i don't have network support, sound support or anything... I also tried to use the patcher in verbose/single user mode from the console and apply the patch contained in the file amd_1048_new.txt... but no luck.. can any1 help me out please? thnx very much in advice. EDIT: oh man.. i forgot to post my hardware details: ASUS a8n-sli deluxe with Nforce4 chipset A64 3000+ 1 GB Ram nvidia 6600GT 2 x SATA disks (connected to the nvidia controller) 2 x PATA disks. Edited February 26, 2007 by atomikramp Link to comment https://www.insanelymac.com/forum/topic/43644-post-installationsystem-wont-boot/ Share on other sites More sharing options...
hecker Posted February 26, 2007 Share Posted February 26, 2007 If you are able to boot in safe mode, then it should be a driver problem. What options did you pick from the install DVD? hecker Link to comment https://www.insanelymac.com/forum/topic/43644-post-installationsystem-wont-boot/#findComment-311906 Share on other sites More sharing options...
atomikramp Posted February 26, 2007 Author Share Posted February 26, 2007 I installed most of the basic system, the AMD patch and the natit for nvidia cards... Link to comment https://www.insanelymac.com/forum/topic/43644-post-installationsystem-wont-boot/#findComment-311925 Share on other sites More sharing options...
hecker Posted February 26, 2007 Share Posted February 26, 2007 Hmm. Most people recommend using as little options as possible during install. It seems that the options "out-of-the-box" sometimes break stuff instead of fixing them. Of course you may want to try other things before re-installing. Sorry I can't be of any more help hecker Link to comment https://www.insanelymac.com/forum/topic/43644-post-installationsystem-wont-boot/#findComment-311946 Share on other sites More sharing options...
atomikramp Posted February 26, 2007 Author Share Posted February 26, 2007 do you have any guide on how to make a clean installation and then manually patch it? maybe it would be the best solution Link to comment https://www.insanelymac.com/forum/topic/43644-post-installationsystem-wont-boot/#findComment-312023 Share on other sites More sharing options...
atomikramp Posted February 27, 2007 Author Share Posted February 27, 2007 (edited) Re sorry for the new reply... i make this to add further informations for my problem.. maybe some1 can help me out with them. since i dunno how to log the kernel panic traces.. i used the old fascion way i made a pic of the monitor.. pretty readable.. so that you can see what kinda error it gives when i try to boot it normally. (no -x flag at boot) EDIT: sorry.. wrong pic... Fixed now Edited February 27, 2007 by atomikramp Link to comment https://www.insanelymac.com/forum/topic/43644-post-installationsystem-wont-boot/#findComment-312499 Share on other sites More sharing options...
mspr Posted March 1, 2007 Share Posted March 1, 2007 Hi, I installed OSX JAS Intel AMD 10.4.8 DVD and I get the same error (Kernel panic) on boot. I can boot only in safe mode (-x) I installed only OSX and AMD patch 10.4.8 (no video driver or other patches) I hope to solve this problem... Thank you Bye Link to comment https://www.insanelymac.com/forum/topic/43644-post-installationsystem-wont-boot/#findComment-313789 Share on other sites More sharing options...
Recommended Posts