nightfly2000 Posted February 13, 2007 Share Posted February 13, 2007 Hi I´m new here. I have a Dell Inspirion 8600 with Jas 10.4.8 sse2. A lot of my components works very well. (cpu throttle, resolution change, audio, wired lan, usb, firewire, touchepad, touche stick) I have tried some installers like macvidia, or natit to get full support for my videocard. When I install the natit driver, then I can´t boot into osx86. I get an restart picture or a black screen! Has anyone the same videocard running full (with quartz extreme and core image)? I als have tried a intel 2200 wlan mini pci card with the guide. But I can´t install it. Has anyone a running mini pci wlan card working on his dell inspiron 8600? I want to know whether a other mini pci card works for my notebook. Notebook config: Video: Geforce 5650 Audio: Sigmatel CPU: Pentium M 1,5 Ghz Wlan: Intel 2100 mini pci card Chipset: intel 855pm Here is my profiler status: Chipsatz-Modell: Unknown nVidia Typ: Monitor Bus: AGP VRAM (gesamt): 128 MB Hersteller: NVIDIA (0x10de) Geräte-ID: 0x031b Versions-ID: 0x00a1 Monitore: Monitor: Auflösung: 1680 x 1050 Farbtiefe: 32-Bit Farbe Core Image: Nicht unterstützt Hauptmonitor: Ja Synchronisierung: Aus Eingeschaltet: Ja Quartz Extreme: Nicht unterstützt Monitor: Status: Kein Monitor angeschlossen greets Chris Link to comment https://www.insanelymac.com/forum/topic/42274-geforce-5650go/ Share on other sites More sharing options...
barchetta Posted February 22, 2007 Share Posted February 22, 2007 Hi Chris, I have exactly the same configuration: 8600 with Go5650. I had installed the NV40 drivers at installation, eventhough the Go5650 is a NV31. As a result, like you I can switch resolutions, from 800x500 (!) to 1920x1200, but have not accelerated video (CI, QE). I tried MacVida and NATIT drivers but also got the black screen. Here's a bit of bootlog: Feb 22 17:45:56 localhost kernel[0]: NVDANV30HAL loaded and registered. Feb 22 17:45:56 localhost kernel[0]: VID: family specific matching fails Feb 22 17:45:56 localhost kernel[0]: Apple16X50ACPI0: Identified Serial Port on ACPI Device=UAR1 Feb 22 17:45:56 localhost kernel[0]: Apple16X50UARTSync0: Detected 16550AF/C/CF FIFO=16 MaxBaud=115200 Feb 22 17:45:56 localhost kernel[0]: VID: family specific matching fails Feb 22 17:45:56 localhost kernel[0]: Titan: By omni, built November 4, 2006 Feb 22 17:45:56 localhost kernel[0]: Titan: Testing for NVidia card... Feb 22 17:45:56 localhost kernel[0]: Titan: Found NVIDIA GeForce FX Go5650 Feb 22 17:45:56 localhost kernel[0]: Titan: All set, cross your fingers! Feb 22 17:45:56 localhost kernel[0]: ApplePS2Trackpad: ALPS GlidePoint v8.99 So, basically I can't help you, but confirm what you've been experiencing..! Marc Link to comment https://www.insanelymac.com/forum/topic/42274-geforce-5650go/#findComment-308988 Share on other sites More sharing options...
barchetta Posted February 23, 2007 Share Posted February 23, 2007 Hmm... I just had a tought - we both have a Pentium M, which doesn't support SSE3. Possibly the Titan drivers (and MacVidia) need SSE3 for CI and QE to work? Marc Link to comment https://www.insanelymac.com/forum/topic/42274-geforce-5650go/#findComment-309444 Share on other sites More sharing options...
nylock10 Posted February 23, 2007 Share Posted February 23, 2007 Try out my 10.4.8 SSE2 / GeForce QE/CI install guide:http://forum.insanelymac.com/index.php?showtopic=36480&st=0&p=259462entry259462 Make sure to check the last page after you get QE/CI. Link to comment https://www.insanelymac.com/forum/topic/42274-geforce-5650go/#findComment-309741 Share on other sites More sharing options...
nightfly2000 Posted March 7, 2007 Author Share Posted March 7, 2007 Hi I doesn´t tried your tutorial complete, but i tried the thing with the original update and edited all kext. But it doesn´t worked. I tried the titan kext but the also doesn´t worked. So I don´t know really I tried the natit.kext and edited all geforce kext to. I also installed the AGP gart kext. But the also doesn´t worked. But today i´m very surprised because I tried all the things a few days ago. And today I wanted to check something in the system profiler and i could not believe what i saw. I looked to core image and quartz extreme and there stand it is supported. The only thing that i want to check is the agp thing, because when i typed at the system boot -v the agp doesn´t loaded. But when i copy the agp gart again to the extensions folder the would be showed correctly at startup. So i will try it but i am not sure whether the core image and the quartz extreme worked after i copy the agp gart again into the folder. I also doesn´t know if the dual display is supported but i will check it! Here is my system profiler status: Unknown nVidia: Chipsatz-Modell: Unknown nVidia Typ: Monitor Bus: PCI VRAM (gesamt): 128 MB Hersteller: NVIDIA (0x10de) Geräte-ID: 0x031b Versions-ID: 0x00a1 Monitore: Monitor: Auflösung: 1680 x 1050 Farbtiefe: 32-Bit Farbe Core Image: Unterstützt Hauptmonitor: Ja Synchronisierung: Aus Eingeschaltet: Ja Quartz Extreme: Unterstützt Monitor: Status: Kein Monitor angeschlossen Is there a way to change unkown nvidia to my Nvida 5650 ? And Is there a tutorial where i can get my cardbus running? I have I texas instruments 4510 cardus chip! Thanks for help Greets chris from Austria Link to comment https://www.insanelymac.com/forum/topic/42274-geforce-5650go/#findComment-318584 Share on other sites More sharing options...
barchetta Posted March 12, 2007 Share Posted March 12, 2007 Chris, can you confirm QE and CI are working? (I mean, does things like zooming (ctrl + scrollwheel) really go smooth? Can you play a DVD now? By the way, on my setup my card is recognized (no "unknown nvidia"): NVIDIA GeForce FX Go5650: Chipsetmodel: NVIDIA GeForce FX Go5650 Type: Beeldscherm Bus: AGP VRAM (totaal): 128 MB Fabrikant: NVIDIA (0x10de) Apparaatcode: 0x031b Revisiecode: 0x00a1 etc. As of now QE and CI aren't not working, but I really haven't tried it this time around Marc Link to comment https://www.insanelymac.com/forum/topic/42274-geforce-5650go/#findComment-322160 Share on other sites More sharing options...
barchetta Posted March 14, 2007 Share Posted March 14, 2007 Here is my system profiler status: Unknown nVidia: Chipsatz-Modell: Unknown nVidia Typ: Monitor Bus: PCI Interesting! According to http://forum.insanelymac.com/index.php?sho...36044&st=60 , removing AGP seems to work on some cards. And indeed, your bus is now said to be PCI instead of AGP. I'm currently in XP-mode, when I'm back on OSX, I will try to remove AGPGart! Marc Link to comment https://www.insanelymac.com/forum/topic/42274-geforce-5650go/#findComment-323867 Share on other sites More sharing options...
barchetta Posted March 15, 2007 Share Posted March 15, 2007 Update: Nope - deleting AGP doesn't work. Yes, it now says PCI in the system profiler, but no QE nor CI. Well, that would've been too simple I guess Marc Link to comment https://www.insanelymac.com/forum/topic/42274-geforce-5650go/#findComment-324613 Share on other sites More sharing options...
barchetta Posted March 18, 2007 Share Posted March 18, 2007 (edited) The AGP-bit is the key. I used this thread: http://forum.insanelymac.com/lofiversion/i...php/t36044.html and still didn't get QE/CI, but did get hires 1920x1200. Note: I didn't install Titan from the DVD. Then I deleted AGPGart and hey presto, Bob's your uncle! Zooming (Ctrl+the scroll wheel on my Mighty Mouse [yes, my first Apple hardware!]) is smooth, F12 is smooth, I'm happy now Marc Edited March 18, 2007 by barchetta Link to comment https://www.insanelymac.com/forum/topic/42274-geforce-5650go/#findComment-326609 Share on other sites More sharing options...
Recommended Posts