goodwiz Posted February 5, 2007 Share Posted February 5, 2007 Je m'attaque maintenant a ma carte ethernet: Ethernet Intel Pro/100 VE NetWork Connection J'ai cherché sur le wiki et j'ai trouvé ca : http://forum.insanelymac.com/index.php?sho...amp;#entry95368 J'ai telechergé le ficheir qui est posté mais je ne comprend pas tres bien comment l'installer. Il y a un fichier texte qui detaille l'installation: Hi everyone, This is the AppleIntel8255x.kext this kext also works for the 82557 chipset of the Intel Pro/100 VE Ethernet Card, all you need to do is drag the AppleIntel8255x.kext to the following folder: /System/Library/Extensions/ Once you have dragged the filed into /System/Library/Extensions/ you will need to Authenticate with your administrative password. Once you have authenticated you will need to open a terminal window & paste the following commands into the terminal: sudo chmod -R 755 /System/Library/Extensions/AppleIntel8255x.kext [authenticated again] sudo chown -R root:wheel /System/Library/Extensions/AppleIntel8255x.kext sudo kextload -v /System/Library/Extensions/AppleIntel8255x.kext [manually load kext] When you have manualy loaded the kext Successfully you should get the following text or something similar. Once the kext is successfully loaded clear the kext cache to do this copy and paste the following into a Terminal: sudo rm /System/Library/Extensions.mkext [This forces the system to re-examine all of the drivers and rematch during the next boot cycle.] Now Reboot. Once you have rebooted go to System Preferences => Network => Built-In Ethernet [This may differ] => Configure Now Configure the Built-In Ethernet and you are now Fully Networked! Enjoy Your "Intel Pro/100 VE Ethernet Card" Bref, si j'ai bien comprit il faut que je mette dans le dossier(AppleIntel8255x.kext) posté dans /System/Library/Extensions/. Il faut que je fasse authentifié et que je mette mon mot de passe. Mais je ne comprend pas ce qu'il faut faire apres cette etape merci de votre savoir!!! Link to comment https://www.insanelymac.com/forum/topic/41245-ethernet-intel-pro100-ve-network-connection/ Share on other sites More sharing options...
soldore Posted February 5, 2007 Share Posted February 5, 2007 tu ouvres le logiciel terminal qui se trouve sur ton disque dur dans application/utilitaire puis tu tapes: sudo chmod -R 755 /System/Library/Extensions/AppleIntel8255x.kext tu appuie sur entrée et ainsi de suite Link to comment https://www.insanelymac.com/forum/topic/41245-ethernet-intel-pro100-ve-network-connection/#findComment-294918 Share on other sites More sharing options...
sn8k Posted February 6, 2007 Share Posted February 6, 2007 plus simple : tu copies AppleIntel etc... ensuite, tu vas dans l'utilitaire de disques et tu repares les permissions. tu redemarres, et voila. Link to comment https://www.insanelymac.com/forum/topic/41245-ethernet-intel-pro100-ve-network-connection/#findComment-294941 Share on other sites More sharing options...
goodwiz Posted February 6, 2007 Author Share Posted February 6, 2007 c'est galere ca ne veut pas fonctionner! peut etre que c'st parceque je me suis lanté sur le chipset!! mon id vendor:=8086 ; id device=1092 j'ai retenté la 1er methode que j'ai trouvé sur le forum via le wiki. Il me semble suivre toutes les etapes sauf : " >> now, write the following line on Terminal.app to clear kext cache. " je ne comprend pas ce que veut dire "clear kest cache" j'espere que le fait d'avoir mis auparavant le fichier que j'ai trouvé sur le post, ne va pas tout me comprommettre! merci à vous! j'y arriverais un jour , j'y arriverais!!! Link to comment https://www.insanelymac.com/forum/topic/41245-ethernet-intel-pro100-ve-network-connection/#findComment-295197 Share on other sites More sharing options...
sn8k Posted February 6, 2007 Share Posted February 6, 2007 clear kext cache : vider le cache des kexts. ca signifie supprimer les fichiers Extensions.mkext et extensions.Kextcache du dossiers Extensions, et redemarrer. Link to comment https://www.insanelymac.com/forum/topic/41245-ethernet-intel-pro100-ve-network-connection/#findComment-295226 Share on other sites More sharing options...
sn8k Posted February 6, 2007 Share Posted February 6, 2007 essayes avec ce fichier : http://psykopat.free.fr/apple/Modifiedkext...l8255x.kext.zip FAIS UNE SAUVEGARDE du fichier deja existant qui est dans /System/Library/Extensions, et remplaces le par celui ci. Ensuite, effaces les fichiers /System/library/Extensions.kextcache et Extentions.mkext Repares les permissions a l'aide de l'utilitaire de disques et un petit reboot ! et, au passage, j'y pensais plus, mais je me disais qu'il y'avais un truc qui clochait ... J'AI une intel pro 100VE, et elle a toujours tournée sans modifs ! va comprendre ... Link to comment https://www.insanelymac.com/forum/topic/41245-ethernet-intel-pro100-ve-network-connection/#findComment-295239 Share on other sites More sharing options...
goodwiz Posted February 6, 2007 Author Share Posted February 6, 2007 je ne comprend pas ca ne fonctionne pas!! j'ai toujour "built ethernet" en clair , je ne peux donc pas le cocher!!! j'ai essayé tellement de methode que je crois que ca ne fonctionnera pas!! si quelqu un a une idee??? merci Link to comment https://www.insanelymac.com/forum/topic/41245-ethernet-intel-pro100-ve-network-connection/#findComment-295598 Share on other sites More sharing options...
sn8k Posted February 6, 2007 Share Posted February 6, 2007 es tu vraiment sur d'avoir une pro100VE et non pas une pro1000ve ??? la pro1000 est incompatible, la pro100 peut fonctionner ... d'où ma question ! Si tu peux, va sous windows, dans le gestionnaire de peripheriques. Clic droit sur ta carte reseau, et dans le dernier onglet, tu dois pouvoir chopper une ligne qui indiques "PCIDEVidxxxx_"etc etc etc ... si tu pouvais la chopper et copier la ligne ici s'il te plait ... merci d'avance ! Link to comment https://www.insanelymac.com/forum/topic/41245-ethernet-intel-pro100-ve-network-connection/#findComment-295601 Share on other sites More sharing options...
goodwiz Posted February 6, 2007 Author Share Posted February 6, 2007 voila SN8K: PCI\VEN_8086&DEV_1092&SUBSYS_FF101179&REV_02\4&6B16D5B&0&40F0 Link to comment https://www.insanelymac.com/forum/topic/41245-ethernet-intel-pro100-ve-network-connection/#findComment-295640 Share on other sites More sharing options...
sn8k Posted February 6, 2007 Share Posted February 6, 2007 j'ai trouvé d'où viens le probleme ... ton ID n'etait pas dans la liste ... Retelecharges le fichier et reinstalles le. je l'ai modifié, donc meme si c'est le meme nom, ce n'est plus le meme fichier ... http://psykopat.free.fr/apple/Modifiedkext...l8255x.kext.zip Link to comment https://www.insanelymac.com/forum/topic/41245-ethernet-intel-pro100-ve-network-connection/#findComment-295646 Share on other sites More sharing options...
goodwiz Posted February 6, 2007 Author Share Posted February 6, 2007 merci merci et encore merci!!!!! ca fonctionne enfin!!! peux tu me dire ce que t'as changé pour que se fonctionne, juste pour comprendre! la je met ce post depuis mac os X maintenant il manque ma carte wifi je crerai un nouveau post pour ca au fait le clavier n'est pas exactement pareil , est ce normale? et la touche "pomme" est presente sur les claviers de pc? (je pense qu'en cherchant un peu sur le forum je trouverai les reponses) Est ce que la version .8 comprend des changement important? j'ai mis l'update la derniere fois et mac o x ne redemmarer plus! bref, merci encore!! Link to comment https://www.insanelymac.com/forum/topic/41245-ethernet-intel-pro100-ve-network-connection/#findComment-295694 Share on other sites More sharing options...
soldore Posted February 6, 2007 Share Posted February 6, 2007 Pour le clavier http://forum.insanelymac.com/index.php?showtopic=8668 Pour le 10.4.8 ne télécharge pas le pack de mise à joue oficiel il y a un patch qui plante les ordinateurs non apple... Fait un tour sur le forum tu verras des installes de la 10.4.8 modifié qui permettent de mettre à jour sans soucis du genre: http://forum.insanelymac.com/index.php?s=&...showtopic=36746 Link to comment https://www.insanelymac.com/forum/topic/41245-ethernet-intel-pro100-ve-network-connection/#findComment-295729 Share on other sites More sharing options...
sn8k Posted February 7, 2007 Share Posted February 7, 2007 Ce que j'ai changé : - Dans le fichier Info.plist, il y'a plusieurs references (0x10458086 0x45448086 etc ..). Dans ce fichier, ta carte son y etait MAIS il y'avais une faute de frappe, au lieu de 0x10928086, c'etait 0x10298086. donc j'ai reparé cette faute. - de plus, histoire d'etre sur, j'ai rajouté &0xffff000. ce qui signifie "prends a partir de 0x10928086 ET les references suivantes non listées" Voila voila ! Sn8K PS : un truc qui se fetes, je deviens modo a la fin de la semaine normalement ! YESSSSSsss ! Link to comment https://www.insanelymac.com/forum/topic/41245-ethernet-intel-pro100-ve-network-connection/#findComment-295960 Share on other sites More sharing options...
goodwiz Posted February 7, 2007 Author Share Posted February 7, 2007 mazal tov !!! Link to comment https://www.insanelymac.com/forum/topic/41245-ethernet-intel-pro100-ve-network-connection/#findComment-296449 Share on other sites More sharing options...
goodwiz Posted February 18, 2007 Author Share Posted February 18, 2007 Je suis de retour!!! lol apres avoir passé un peu de temps sous OS X je me rend compte que j'ai une probleme avec le driver pour carte reseau (intel pro/100 VE NC). En effet apres avoir placé le fichier modifé pour ma carte reseau par SN8K tout fonctionnait, mais quand je redemarre il y a unefenetre qui s ouvre comme quoi que ce fichier n'a pas pu etre ouvert ou un truc du genre; bref, a chaque fois que je veux utiliser ma carte resau il faut que je "réinstalle" le super fichier de Sn8k et que je redemmare! Je ne vais pas vous le cachez, c'est un peu chiant!!! lol merci d'avance!! Link to comment https://www.insanelymac.com/forum/topic/41245-ethernet-intel-pro100-ve-network-connection/#findComment-305875 Share on other sites More sharing options...
goodwiz Posted February 19, 2007 Author Share Posted February 19, 2007 personne peut m'aider? Link to comment https://www.insanelymac.com/forum/topic/41245-ethernet-intel-pro100-ve-network-connection/#findComment-306778 Share on other sites More sharing options...
soldore Posted February 19, 2007 Share Posted February 19, 2007 PS : un truc qui se fetes, je deviens modo a la fin de la semaine normalement ! YESSSSSsss ! C'est bien ça, félicitation !!! tu vas pouvoir gérer les entêtes du forum et nous faire un truc clair..... Link to comment https://www.insanelymac.com/forum/topic/41245-ethernet-intel-pro100-ve-network-connection/#findComment-306803 Share on other sites More sharing options...
sn8k Posted February 19, 2007 Share Posted February 19, 2007 yop tout le monde ... bon j'ai un peu laché le bordel, et comme apparement mash se fait attendre pour me passer modo, bah je crois que je vais faire comme lui, me faire attendre ! lol .. goodwiz > Pour le kext, t'as essayé de reparer les autorisations du disque ? Link to comment https://www.insanelymac.com/forum/topic/41245-ethernet-intel-pro100-ve-network-connection/#findComment-306811 Share on other sites More sharing options...
goodwiz Posted February 20, 2007 Author Share Posted February 20, 2007 malgre avoir fait multiple 'repair disk permissions", avant , apres, ect, des que je redemarre j'ai la fenetre suivante: "system extension cannot be used" (en me disant que le fichier en cause est AppleIntel8255x.kext je ne comprend pas!!! Link to comment https://www.insanelymac.com/forum/topic/41245-ethernet-intel-pro100-ve-network-connection/#findComment-307348 Share on other sites More sharing options...
flkx Posted February 22, 2007 Share Posted February 22, 2007 malgre avoir fait multiple 'repair disk permissions", avant , apres, ect,des que je redemarre j'ai la fenetre suivante: "system extension cannot be used" (en me disant que le fichier en cause est AppleIntel8255x.kext je ne comprend pas!!! dans : System/Library/Extensions/ efface ces deux fichiers : Extensions.kextcache et Extensions.mkext ensuite répares à nouveau les autorisations sur le disque et reboot ++ Link to comment https://www.insanelymac.com/forum/topic/41245-ethernet-intel-pro100-ve-network-connection/#findComment-309026 Share on other sites More sharing options...
goodwiz Posted February 23, 2007 Author Share Posted February 23, 2007 c'est galere!! toujours le meme probleme, je fais "repair disk permission" apres avoir supprimer les fichiers "Extensions.kextcache" et "Extensions.mkext", ensuite je reboot, a ce redemarrage tout fonctionne , c'est super. Mais quand je redemmarre une nouvelle fois, alors au demarage j ai une fenetre me disant "system extension cannot be used" (en m'indiquant que le fichier en cause est AppleIntel8255x.kext) c'est dommage!!! si vous pouvez me venir en aide.... merci Link to comment https://www.insanelymac.com/forum/topic/41245-ethernet-intel-pro100-ve-network-connection/#findComment-309545 Share on other sites More sharing options...
jb0y Posted January 11, 2009 Share Posted January 11, 2009 Bonjour, Moi j'ai comme ligne: PCI\VEN_8086&DEV_27DC&SUBSYS_2A22103C&REV_01\4&1AF1648C&0&40F0 On pourrait m'envoyer le fichier (modifié surement) car moi ca marche pas Merci A+ Link to comment https://www.insanelymac.com/forum/topic/41245-ethernet-intel-pro100-ve-network-connection/#findComment-1036635 Share on other sites More sharing options...
abdelinho Posted January 31, 2009 Share Posted January 31, 2009 Slt JBoy ta pu resoudre ton probleme ?jai le mm ke toi si oui peut tu m'aider?Ou tout autre personne aussi merci Link to comment https://www.insanelymac.com/forum/topic/41245-ethernet-intel-pro100-ve-network-connection/#findComment-1063057 Share on other sites More sharing options...
koalala Posted January 31, 2009 Share Posted January 31, 2009 Installe le avec KextHelper, c'est beaucoup plus simple : http://cheetha.net/ Tu supprime celui existant, puis quand tu veux installer un kext juste à faire glisser dans la fenêtre. Link to comment https://www.insanelymac.com/forum/topic/41245-ethernet-intel-pro100-ve-network-connection/#findComment-1063295 Share on other sites More sharing options...
Recommended Posts