Jump to content

"Platform not supported" Installation ERROR.

ultrano72

By ultrano72,
in OSx86 10.4 (Tiger)

 Share
7 posts in this topic

Recommended Posts

ultrano72
ultrano72
Posted
Posted

When I tried to install Mac OS X86 Tiger on my PC (Celeron D @ 2.8 Ghz, SSE3, EM64, ATI Radeon X200 IGP w/32 Shared MB, MSI RC410M-L, 533FSB, 512 MB DDR2@667MHz, 1x SATA 160GB )

 

I got an error displaying just a Stop Red Sign , so then I tried using VMWare and it appeared to be a problem with the Video (cuz I could't see anything in Full Screen), O.k, I then restarted.

 

Then, I decided to set the Video Mode on darwin to 800x600x16@60 ( and it gave me the same Stop Red Sign )

 

Then, I used the verbose command, and I saw the message "Platform not supported", again.

 

I thought it was a problem with the Processor (cuz it's 64-bits), but then I browsed the Hardware Compatibility List (HCL), Hardware Component and Unsuported Hardware Pages (www.osx86project.org), and I saw that the my Motherboard and Processor were compatible, except that in the Test it says it not detects the Sillicon Image Serial ATA Raid Controller ( and the only Disk Drive I have is SATA ), I don't think this is much a problem.

 

What do you think ?

 

I would appreciate any response, comment or advice :mellow: .

Thanks in advance. :)

 

I'm gonna do again all those things and write down the results tomorrow to give you accurate information. (Real Mode & VMWare).

I'll plug tomorrow an IDE Drive and see what happen.

ultrano72
ultrano72
Posted
  • Author
Posted

Thank you for reply. :whistle:

By patched do you mean if it's for the x86 platform ? ( I hope ).

 

The version I have is Mac OS 10.4 Tiger For Intel x86.

 

But the only patched versions I've seen are the ones which claim to use a SSE2 Patch. I hope you aren't referring to that versions.

 

O.k, here I post more accurate info with a New Error Message. ( Unable to find driver for this platform: "X86PC". & Still waiting for root device ).

I tried setting SATA Controlller as IDE, RAID, and STORAGE on BIOS, but it's the same.

When I boot from the DVD Disc the following info appears on screen:

 

[color="#c0c0c0"][b]Darwin/x86 boot v5.0.128
479MB
VESA 2.0 32MB (ATI RADEON XPRESS 200 SERIES)[/b][/color]

 

And it prompts me to select a startup volume from the following list (or press [ENTER] key for default ):

 

[color="#c0c0c0"][b]hd (111,0) Mac OS X Install Disc[/b][/color]

 

When I booted with the " -x " option (safe mode) and pressed [ENTER] key the following info appeared on screen (with a background image of a Power Button and a message "You need to restart your computer. Hold down the Power Button for serveral seconds or press the Restart Button"):

 

panic 0 caller 0xC0321D8B: Unable to find driver for this platform: "ADP2,1"
Debugger called: (panic)

[color="#ff0000"](AND A SERIES OF LINES LIKE THE FOLLOWING):[/color]

Frame  0xc6955ee0:PC 0x0124b5c  args  0xc033d7a0  0x00000001  0xcb953f10  0xc105d180     panic + 0x00000154

[color="#ff0000"](AND AT THE END):
[/color]
invalid frame pointer 0x069534d4
ethernet MAC address: 00:00:00:00:00:00
ip address: 0.0.0.0
waiting for remote debugger connection
kdp_poll: no debugger device

 

But then I booted with the " mach_kernel rd=disk0s1 -v platform=ACPI " command line and the following info appeared on screen:

 

standard timeslicing quantum is: 10000us
rm_page_bootstrap: 118611 free  pages
mig_table_max_displ = 70

CPU identification = Intel ® Celeron ® CPU 2.80 GHz
CPU features: FPU VME DE PSE TSC MSR PAE MCE CX8 APIC SEP MTRR PGE MGA CMOV PAT PSE36 CFLSH DS ACPI MMX FVSR SSE SSE2 SS HTT TM SSE3 MON DSCPL TM2 CX16 TPR
 HTT: 1 core on a die; 1 logical cpu per core
CPU extended features: XD EM64T
Enabling XMM register save/restore and SSE/SSE2 opcodes
battery clock configured
[RTLCLOCK] frequency 2790000000 ( 2786441360 )
PCI Ver = 3.0 BusCount=3 Features= [bIOSIO CM1]
ACPI CA 20050408 [debug level = 0 layer = 0]
AppleACPICPU:  ProcessorApicId=1  LocalApicId=0 Enabled
AppleACPICPU:  ProcessorApicId=2  LocalApicId=129 Disabled
AppleACPICPU:  ProcessorApicId=3  LocalApicId=130 Disabled
AppleACPICPU:  ProcessorApicId=4  LocalApicId=131 Disabled
Copyright © 1982, 1986, 1989, 1991, 1993.
 The Regents of the University of California. All Rights Reserved.



using 655 buffer headers and 655 cluster IO buffer headers
Security auditing service present
BSM auditing present
disabled
from path: "disk0s1,mach_kernel", waiting on <dict id="0"><key>IOProviderClass</key><string id="1">IOService</string><key>BSD Name</key><string id="2">disk0s1</string></dict>

IOAPIC: Version 0x21 Vectors 0:24
ACPI: Supported S-States [s0 S3 S4 S5] (S3)
AppleMTRR Support: Enabled Write-Combining for memory range d0000000:400000
display: family specific matching fails

[color="#ff0000"](AND AT THE END A SERIES OF MESSAGES LIKE THIS ONE APPEARING EVERY MINUTE OR SOMETHING):[/color][color="#ff0000"]
[/color]
[b][color="#ff0000"]Still waiting for root device
Still waiting for root device
Still waiting for root device
Still waiting for root device[/color][/b]

( I think it's waiting for disk0s1 but there isn't a SATA Controller even )

 

Still waiting for root device

( I think it's waiting for disk0s1 but there isn't a SATA Disk Controller even )

 

Right now I'm going to restart and connect an old 4GB IDE Drive and see what happens. I understand de SATA Disk controller isn't compatible (the HDD Led doesn't even flash) and that the project page says it's untested, but, why the "Platform not supported" message and why it loads first with the "ADP2,1" Platform.

 

Also, when I used the "mach_kernel rd=disk0s1 -v platform=X86PC" command line, similar info is displayed ( except for the text in red):

 

standard timeslicing quantum is: 10000us
rm_page_bootstrap: 118611 free  pages
mig_table_max_displ = 70

CPU identification = Intel ® Celeron ® CPU 2.80 GHz
CPU features: FPU VME DE PSE TSC MSR PAE MCE CX8 APIC SEP MTRR PGE MGA CMOV PAT PSE36 CFLSH DS ACPI MMX FVSR SSE SSE2 SS HTT TM SSE3 MON DSCPL TM2 CX16 TPR
 HTT: 1 core on a die; 1 logical cpu per core
CPU extended features: XD EM64T
Enabling XMM register save/restore and SSE/SSE2 opcodes
battery clock configured
[RTLCLOCK] frequency 2790000000 ( 2786441360 )

[b][color="#ff0000"]panic (cpu 0 caller 0xC0321D8B): Unable to find driver for this platform: "X86PC".[/color][/b]

Debugger called: (panic)

[color="#ff0000"](AND A SERIES OF LINES LIKE THE FOLLOWING):[/color]

Frame  0xc6955ee0:PC 0x0124b5c  args  0xc033d7a0  0x00000001  0xcb953f10  0xc105d180     panic + 0x00000154

[color="#ff0000"](AND AT THE END):
[/color]
invalid frame pointer 0x069534d4
ethernet MAC address: 00:00:00:00:00:00
ip address: 0.0.0.0
waiting for remote debugger connection
kdp_poll: no debugger device

 

Thanks. :)

marliwahoo
marliwahoo
Posted
Posted

I not sure what you are using. Do you have a "real" (un hacked) version of 10.4 from Apple ? If you do it will not work. You need the modified version (aka "hacked") The current version is the jaS 10.4.8 Intel/AMD sse3 sse2. It is available at different places that can not be mentioned here. Good luck.

ultrano72
ultrano72
Posted
  • Author
Posted

Thanks marliwaho. :)

O.k, I think that's the reason. But, then, that means that the version I have is for Intel Processors (x86) but not for PC's ? And if so, it is designed to install only on real Mac Hardware ?

 

I'll see if I can buy that Patched version.

 

If anyone is interested, today I connected the IDE Hard Disk Drive to the computer.

I booted Mac OS DVD... and the same thing: Stop Sign. :)

 

So I booted Mac OS DVD again and executed "mach_kernel rd=disk0s1 -v platform=ACPI" command and it displayed the same info but with different content:

(The RED Text is the different one)

 

standard timeslicing quantum is: 10000us
rm_page_bootstrap: 118611 free pages
mig_table_max_displ = 70

CPU identification = Intel ® Celeron ® CPU 2.80 GHz
CPU features: FPU VME DE PSE TSC MSR PAE MCE CX8 APIC SEP MTRR PGE MGA CMOV PAT PSE36 CFLSH DS ACPI MMX FVSR SSE SSE2 SS HTT TM SSE3 MON DSCPL TM2 CX16 TPR
HTT: 1 core on a die; 1 logical cpu per core
CPU extended features: XD EM64T
Enabling XMM register save/restore and SSE/SSE2 opcodes
battery clock configured
[RTLCLOCK] frequency 2790000000 ( 2786441360 )
PCI Ver = 3.0 BusCount=3 Features= [bIOSIO CM1]
ACPI CA 20050408 [debug level = 0 layer = 0]
AppleACPICPU: ProcessorApicId=1 LocalApicId=0 Enabled
AppleACPICPU: ProcessorApicId=2 LocalApicId=129 Disabled
AppleACPICPU: ProcessorApicId=3 LocalApicId=130 Disabled
AppleACPICPU: ProcessorApicId=4 LocalApicId=131 Disabled
Copyright © 1982, 1986, 1989, 1991, 1993.
The Regents of the University of California. All Rights Reserved.

using 655 buffer headers and 655 cluster IO buffer headers
Security auditing service present
BSM auditing present
disabled
from path: "disk0s1,mach_kernel", waiting on <dict id="0"><key>IOProviderClass</key><string id="1">IOService</string><key>BSD Name</key><string id="2">disk0s1</string></dict>

IOAPIC: Version 0x21 Vectors 0:24
ACPI: Supported S-States [s0 S3 S4 S5] (S3)
AppleMTRR Support: Enabled Write-Combining for memory range d0000000:400000
display: family specific matching fails
[/color][color="#ff0000"][b]USB caused wake event (EHCI)
in6_ifattach: lo0 failed to attach a linklocal address
[/b][color="#ff00ff"][b]Still waiting for root device

 

[/b]So I rebooted and executed "-v (only verbose mode)" command and it displayed the same info but with a UUID Thing and for the first time the Machine made a BEEP Code :

 

standard timeslicing quantum is: 10000us
rm_page_bootstrap: 118611 free pages
mig_table_max_displ = 70

CPU identification = Intel ® Celeron ® CPU 2.80 GHz
CPU features: FPU VME DE PSE TSC MSR PAE MCE CX8 APIC SEP MTRR PGE MGA CMOV PAT PSE36 CFLSH DS ACPI MMX FVSR SSE SSE2 SS HTT TM SSE3 MON DSCPL TM2 CX16 TPR
HTT: 1 core on a die; 1 logical cpu per core
CPU extended features: XD EM64T
Enabling XMM register save/restore and SSE/SSE2 opcodes
battery clock configured
[RTLCLOCK] frequency 2790000000 ( 2786441360 )
PCI Ver = 3.0 BusCount=3 Features= [bIOSIO CM1]
ACPI CA 20050408 [debug level = 0 layer = 0]
AppleACPICPU: ProcessorApicId=1 LocalApicId=0 Enabled
AppleACPICPU: ProcessorApicId=2 LocalApicId=129 Disabled
AppleACPICPU: ProcessorApicId=3 LocalApicId=130 Disabled
AppleACPICPU: ProcessorApicId=4 LocalApicId=131 Disabled
Copyright © 1982, 1986, 1989, 1991, 1993.
The Regents of the University of California. All Rights Reserved.

using 655 buffer headers and 655 cluster IO buffer headers
Security auditing service present
BSM auditing present
disabled

From path:[b] "UUID".
[/b]Waiting for boot volume with [b]UUID 77820F9D-4EF6-3B5B-ABA1-19D13CCA225[/b]
Waiting on <dict id="0"><key>[b][color="#4169e1"]IOProviderClass[/color][/b]</key><string ID="1">[color="#4169e1"]IOResources[/color]</string><key>[b][color="#4169e1"]IOResourceMatch[/color][/b]</key><string id="2">[b][color="#ff00ff"]boot-uuid-media[/color][/b]</string></dict>
IOAPIC: Version 0x21 Vectors 0:24
ACPI: Supported S-States [s0 S3 S4 S5] (S3)
AppleMTRR Support: Enabled Write-Combining for memory range d0000000:400000
display: family specific matching fails
[color="#ff0000"][b]USB caused wake event (EHCI)
Still waiting for root device.
[/b][/color]

[/color]

 

Well, i have to get JaS first and see what happens, cuz it's so rare that even VMWare could't run Mac.

ultrano72
ultrano72
Posted
  • Author
Posted

Hi, I just logged to say that I got today the patched version and it now works :censored2:, the DVD is too slow (I don't know if it's because it's a DVD-RW) but I can see the Setup Screen (No PS/2 mouse detected , and Keyboard is messed up with the lights); but that's another post.

 

Also, in VMWare my only problem is that i can't see any partitions on the Virtual HDD, i tried to format it with another guest O.S but it throws a "sbin/... not found" error when loading

 Share
Go to topic listing
×
×
  • Create New...