Installation Troubles: Hard Drives Not Detected during Ventura or Sonoma Setup [ Asus Z490-P , I9-10900K , Radeon RX580 ]

[frankx86]

I can't install Ventura or Sonoma. In short, the problem is that the hard drives are not being detected.

The startup of the installation program from the USB drive is unusually slow, taking about 16 minutes to start (the USB drive is not broken because the same drive with the Monterey image boots in 10 seconds). The problem occurs during the installation phase: as soon as I get to Disk Utility, no hard drive is shown, only the USB drive.

I followed the official OpenCore guide, I've tried various settings, including activating AppleXcpmCfgLock, and then I also tried disabling SecureBootModel. But nothing...

I tried the latest version of OpenCore and then other EFI found online, but to no avail...

I believe the problem lies in the EFI configuration or in some new drivers/kext released after the distributions of Catalina and Monterey; these two distributions work fine on my setup...

I don't know what else to try. Can someone with my same setup help me?

Asus PRIME Z490-P
I9-10900K

Sapphire Nitro+ Radeon RX 580 8GB [currently with two monitors]

2* WD_BLACK SN850X 1TB M.2 2280
2*SSD crucial mx
2*HDD
...Various external backup hard drives and other devices

[verdazil]

@frankx86, set SATA Mode: AHCI in BIOS?

Misc -> Security -> ScanPolicy -> 0 (config.plist)

Edited March 23, 2024 by verdazil

[Slice]

@frankx86, did you try Clover?

[frankx86]

On 3/23/2024 at 10:21 AM, verdazil said:

@frankx86, set SATA Mode: AHCI in BIOS?

Misc -> Security -> ScanPolicy -> 0 (config.plist)

Yes, in the BIOS the SATA mode is set to AHCI... and now I'm trying this EFI: 

https://github.com/AutismSuperman/Hackintosh-ASUS-Z490-P-i7-10700K-UHD630
But the issue persists

 

 

 

[frankx86]

On 3/25/2024 at 7:44 AM, Slice said:

@frankx86, did you try Clover?

I haven't tried Clover yet, but any solution would be appreciated

[frankx86]

Perhaps it won't make a difference, but... I tried to start the installation even without the RX580. But the problem remains. And... If it had been a BIOS settings issue, then at this point the USB drive to install Sonoma or Ventura wouldn't have started either. I don't know what to do anymore...

Edited March 26, 2024 by frankx86
+Details

[ichelash]

Have you tried using nvme kext in your EFI?

Edited March 26, 2024 by ichelash

[frankx86]

I removed the graphics card, reset, and then reconfigured the BIOS settings according to the guide, and now I find myself in this situation [see the uploaded image]

I always use the same EFI, but as I mentioned before, without the RX580:

https://github.com/AutismSuperman/Hackintosh-ASUS-Z490-P-i7-10700K-UHD630

Here is the complete boot argument:
"-v debug=0x100 keepsyms=1 igfxfw=2 igfxonln=1 alcid=1 gfxrst=1 alcdelay=500 shikigva=80 -cdfon -igfxmpc revpatch=sbvmm"

I have only added: "-v debug=0x100 keepsyms=1""

Edited March 27, 2024 by frankx86
.

[erice]

Salve.

In relazione ad un tuo messaggio che solo ora ho visto, ti invio il mio EFI, se ancora mai può esserti utile.

La release OpenCore è la 1.0.0.

La scheda audio non è impostata per via del fatto che uso una FiiO esterna su USB. Le patch credo siano in parte ridondanti. Ho svuotato le Resources per il loro peso eccessivo.

Un cordiale saluto da Napoli.

Erice

EFI.zip

Edited April 11, 2024 by erice
to frankx86

[Slice]

Use English!

[erice]

I apologize.

It is the provincial ambition, fortunately only occasional, of thinking that one's dialect can be a language understandable by everyone.