Questions about opencore configuration i5-13400 / z790-msi / 6800XT

[SPYAM]

Hello and don't be tired♥
My friends, I almost read Dortania's website.
I have some questions, I want you to help me in this matter:

I want to make a complete configuration with OpenCore, with the help of you dear elders and professors.

 

Question 1: Well, in order to identify my motherboard, should I place special kexts? Or should I do a special configuration in the tables?

Motherboard Msi z790 pro D4

Note: according to my research, kexts or special config files are not needed!

 

Question 2: Do I need any configuration or special files for my RAMs?

Ram Corsair 16GB Vengeance PRO RGB DDR4 3200 CL16 DUAL

 

Question 3: I think there is no need for kexts or special configuration files for my storage spaces, right?

Western Digital Blue Internal Hard Drive 1TB : NTFS Format
Western Digital Blue Internal Hard Drive 2TB : NTFS Format

 

Question 4: To identify and read NVMe files, I think there is a special kexts: 

Lexar NM620 256G M.2 2280 PCIe Gen3x4 NVMe SSD Drive : Windows
Lexar NM620 256G M.2 2280 PCIe Gen3x4 NVMe SSD Drive : Hackintosh

NVMeFix.kexts

 

Question 5: Should we only use the following kexts for the graphic card?

Sapphire NITRO+ RX 6800 XT Graphics Card

WhateverGreen.kexts

 

Question 6: Are kexts or special settings needed for the CPU? I didn't see anything special for this cpu, maybe I should enter cpuid in the configs? Thank you for more guidance

Intel Core i5-13400 Raptor Lake LGA1700 13th

 

Question 7: Do you need kexts or special configuration for power case?

Gamedias 850w power

 

Question 8: Do you need kexts or special configuration for the monitor? Of course, I can hear the sound output from the monitor speakers!

Monitor 27 inch tuf 165h

 

Question 9: Do I have to enter special kexts or configuration for keyboard and mouse?

Keyboard Razer v3x

Verity mouse gaming

For this, I think I should use the following kexts:
USBToolBox.kext

Or should I use this USBInjectAll.kexts?

 

Question 10: Well, for almost many tasks, the name Lilu.kext is required and it is necessary to include it in opencore?

 

Question 11: I have to use VirtualSMC.kexts to boot and boot the system, right?

 

Question 12: Do I have to put AppleALC.kexts in order to have sound?

I just have a question here:
For example, I want to adapt a hardware in Mac
How and in what way, for example, can I find that piece of hardware in Windows, its code or device id or its driver and make it compatible in Hackintosh?

 

Question 13: Which kexts should I use for my LAN network card?

For example, now my card is of the following model:
There is only one question, should I find the hardware ids??
Intel(R) Ethernet Controller l225-v (PCI\VEN_8086&DEV_15F3&SUBSYS_7E061462&REV_03)

Should I use this IntelMausi.kexts?

Or should I use this one? » SmallTreeIntel82576.kext

 

Question 14: Are these tables SSDT? Or are they the same configurations?
Please tell me what exactly is necessary to enter in these SSDTs? Which hardware should be included in these SSDTs? Can you explain?

 

I apologize to everyone for asking so many questions. Anything you think I need to know in this direction, please tell me

[Slice]

1. Not needed.

2. Absolutely no.

5. At your will. Simple answer - not needed.

6. Quirk ProvideCpuInfo

7. No.

8. Short answer no. The monitor should provide EDID by DDC connector. For sound output you should answer "What is the graphics card?".

9. You should tune by yourself USB map configuration. It is individual for every board revision.

10. Depends on other kext. It is a base for other kext aka "plugins"

11. One of two kexts VirtualSMC or FakeSMC is obligatory for Hackintosh.

12. AppleALC or VoodooHDA will make a sound from embedded sound chip. "can I find that piece of hardware in Windows, its code or device id or its driver and make it compatible in Hackintosh?" - NO

13. Intel LAN devID=0x15F3 is supported by https://github.com/CloverHackyColor/IntelMausiEthernet/releases/tag/2.5.4

 

[SPYAM]

 

I almost made my own configuration:

 

I downloaded the recovery with the instructions below and then booted it into the USB, but I have the following error:

 

 

This is from my flash that I deleted with Rufus like the tutorial below and then put the files:

https://dortania.github.io/OpenCore-Install-Guide/installer-guide/windows-install.html

 

 

EFI.zip

[Slice]

Any question?

[SPYAM]

1 minute ago, Slice said:

Any question?

Hello my dear teacher
I am very happy that you answered.
I did all the work, I selected the efi, and I also went ahead with all the work according to Dortania, but I got an error, I put the picture above!

[Anto65]

Misc -> Security -> Vault -> Optional

[SPYAM]

20 minutes ago, antuneddu said:

Misc -> Security -> Vault -> Optional

Well, dear friend, the error was rejected, but the installation file did not come to enter the installation process.  After that, this file that I downloaded with recovery from CMD is only 600 MB. I downloaded the Ventura .dmg file, which is 11 GB. I want to install it.  Of course, inside CMD, I downloaded the recovery version of Ventura!

 

[MaLd0n]

Use this EFI folder with instructions bellow EFI.zip

-Bios/UEFI in full default settings(CSM to Disable with AMD GPU - Sata to Ahci - Secure Boot Disable on mobiles)
-Delete old EFI folder and paste new. Don't use merge files
-Don't use Drag and Drop into EFI partition. Use Copy/Paste instead
-Reset NVRAM one time - with OpenCore use entry "Reset Nvram" / with Clover use F11 key on boot screen

USB https://www.olarila.com/topic/37827-hackintosh-remap-usb-with-usbtoolbox-windows-or-macos/

Check if you really need npci=0x2000, many mobos with last bios/uefi version we can remove this.

 

[SPYAM]

3 hours ago, MaLd0n said:

Use this EFI folder with instructions bellow EFI.zip

-Bios/UEFI in full default settings(CSM to Disable with AMD GPU - Sata to Ahci - Secure Boot Disable on mobiles)
-Delete old EFI folder and paste new. Don't use merge files
-Don't use Drag and Drop into EFI partition. Use Copy/Paste instead
-Reset NVRAM one time - with OpenCore use entry "Reset Nvram" / with Clover use F11 key on boot screen

USB https://www.olarila.com/topic/37827-hackintosh-remap-usb-with-usbtoolbox-windows-or-macos/

Check if you really need npci=0x2000, many mobos with last bios/uefi version we can remove this.

 

 

Thank you very much my dear friend. Your EFI solved the problem, but I think the Apple icon gets stuck when loading! But, I want to boot Ventura.dmg directly on flash without having Mac operating system, can you help me? How exactly should I proceed or have you seen a tutorial about this? Do you have a solution? If I copy Ventura.dmg into the flash now, that means I can't use it,????

 

UPDATE : Unfortunately, I waited three or four times in the middle, when the Mac icon comes and loads, it gets stuck in the middle every time and there is no progress, and this process takes more than 20-30 minutes until the middle! That is, the slowness of this indicates that the efi folder is not correct, I think! We have to make some changes.

 

UPDATE : When I used it on my Asus laptop, this loading was very fast!
Of course, I would like to add one thing. I ordered the 6800XT graphics card online and it will arrive the day after tomorrow. Could this be the problem?

That is, now there is no graphics method, except the 730 CPU graphics! This is not supported in Hackintosh..! Could it be from this case?

I want to ask, can I proceed with the installation process without graphics? Or should I wait for the graphics to arrive and then start installing Hackintosh?

Edited November 11, 2023 by SPYAM
UPDATE 2 NOTES

[MaLd0n]

U can use IGPU for installation with -igfxvesa to avoid problems

Here EFI 02.zip

[SPYAM]

29 minutes ago, MaLd0n said:

U can use IGPU for installation with -igfxvesa to avoid problems

Here EFI 02.zip

Can you tell me how to add this to the boot argument?
-igfxvesa
Should I edit the config.plist file?

 

 

I entered the installation environment. Thank you. But if possible, tell me what you did in Hadid's EFI file? After that, I install one or another dose of 6800 xt graphics, do I have to do something special to recognize it? Like reinstalling Hackintosh? Or the new EFI? Thankful

Edited November 11, 2023 by SPYAM

[SPYAM]

1 hour ago, MaLd0n said:

U can use IGPU for installation with -igfxvesa to avoid problems

Here EFI 02.zip

I installed the complete Mac. I have a special thank you. In just a day or two, I will edit and change the EFI location of the rx 6800xt graphics that I connected to the motherboard so that it comes up with the 6800xt graphics. Thank you all

[MaLd0n]

Just enjoy. EFI for RX6800.zip

 

[SPYAM]

22 minutes ago, MaLd0n said:

Just enjoy. EFI for RX6800.zip

 

Tell me, how can I easily change or edit the efi system?

 

[MaLd0n]

OCAT or OpenCore Configurator

or any plist editor

[SPYAM]

1 hour ago, MaLd0n said:

OCAT or OpenCore Configurator

or any plist editor

Dear friend, thank you, this is good, but the problem I have is that I have to put the EFI folder inside the hard drive and EFI to boot, because I am booting the Mac with USB. thanks for your help

 

FIXED : ESP Mounter pro

Edited November 11, 2023 by SPYAM