sok5 Posted November 22, 2023 Share Posted November 22, 2023 (edited) On 11/21/2023 at 11:51 AM, GuyEvans said: @sok5 I'm still getting an error, I checked my bios settings from earlier in this thread and they seem ok. Do you know how I can problem solve the error log from my EFI? I couldn't find much info online for the error message i'm getting.  I will keep trying. It seemed to improve a great deal after you sent me an updated EFI (with the RX580 selected). Many thanks for your help so far, i will keep trying.  I'm not sure what's wrong with your system. This new EFI is working with my system. config.plist/Misc/Debug/DisableWatchDog DisableWatchDog=false Boot-args: -v debug=0x100 -no_compat_check amfi_get_out_of_my_way=0x1 -amd_no_dgpu_accel  keepsyms=1 -lilubetaall ipc_control_port_options=0 alcid=28  hope it's working for you preInstall.zip Edited November 22, 2023 by sok5 1 Quote Link to comment https://www.insanelymac.com/forum/topic/357369-hp-z800-ventura-trying-to-follow-successful-instructions-from-another-user-but-not-working-for-me-can-anyone-help/page/3/#findComment-2813792 Share on other sites More sharing options...
sok5 Posted December 3, 2023 Share Posted December 3, 2023 Sonoma 14.1.2 Â 1 Quote Link to comment https://www.insanelymac.com/forum/topic/357369-hp-z800-ventura-trying-to-follow-successful-instructions-from-another-user-but-not-working-for-me-can-anyone-help/page/3/#findComment-2814182 Share on other sites More sharing options...
GuyEvans Posted December 3, 2023 Author Share Posted December 3, 2023 (edited) On 11/22/2023 at 8:54 PM, sok5 said:  I'm not sure what's wrong with your system. This new EFI is working with my system. config.plist/Misc/Debug/DisableWatchDog DisableWatchDog=false Boot-args: -v debug=0x100 -no_compat_check amfi_get_out_of_my_way=0x1 -amd_no_dgpu_accel  keepsyms=1 -lilubetaall ipc_control_port_options=0 alcid=28  hope it's working for you preInstall.zip 5.68 MB · 2 downloads   Thank you again. I'm still trying to install Sonoma. I did notice some mistakes in my bios which I have now fixed and I still have one mistake in my bios which I can't seem to solve. My bios shows these settings below:   and I noticed your bios shows a slightly different screen below: It has an extra option at the bottom which reads "Enhanced Memory Performance". See below:  I can't seem to get that option, and maybe that is why my system will not install Sonoma?  I am using Bios 786G5 v3.61. (from 'System Information).  Thanks for your help, and if you can offer any help on how to make my bios settings the same as yours i'd be very grateful. It would be great if I can install Sonoma on my HP Z800. I really hope so.  (Also it's great to read that you have just installed Sonomo 14.1.2, that is amazing to read!) Thanks again for all of your help in the past, i'm really grateful. And i will keep trying.  Also shown below is my 'System Information' page from my bios:  Once again any help at all to help me solve this would be much appreciated.  Could the problem be because I don't have a "pci Fenvi FV-T919" wifi card. I'm using a BCM94360CS2 Wifi Card and PCI Express Adaptor (Mac Compliant)  Here is my most recent error log:  00:000 00:000 OCS: No schema for FixupAppleEfiImages at 8 index, context <Quirks>! 04:765 04:765 AAPL: #[EB.H.IS|!] Err(0xE) <- RT.GV boot-signature 7C436110-AB2A-4BBB-A880-FE41995C9F82 04:913 00:147 AAPL: #[EB.H.IS|!] Err(0xE) <- RT.GV boot-image-key 7C436110-AB2A-4BBB-A880-FE41995C9F82 05:021 00:107 AAPL: #[EB|H:IS] 0 05:129 00:108 AAPL: #[EB|LOG:INIT] 2023-12-03T11:56:52 05:247 00:117 AAPL: #[EB|VERSION] <"bootbase.efi 580~439 (Official), built 2023-08-05T06:56:06-0700"> 05:353 00:106 AAPL: #[EB|BUILD] <"BUILD-INFO[400]:{"DisplayName":"bootbase.efi","DisplayVersion":"580~439","RecordUuid":"08567299-4618-43B8-9137-4F6F99975A72","BuildTime":"2023-08-05T06:56:06-0700","ProjectName":"efiboot","ProductName":"bootbase.efi","SourceVersion":"580","BuildVersion":"439","BuildConfiguration":"Release","BuildType":"Official","Compiler":"clang-1500.0.37.1","SdkVersion":"14.0","SdkBuild":"23A316","TargetArchitectures":"x86_64"}"> 05:460 00:106 AAPL: #[EB.CFG.DEV|!] Err(0xE) <- RT.GV booter-strict-xmlparser 7C436110-AB2A-4BBB-A880-FE41995C9F82 05:566 00:106 AAPL: #[EB|CFG:DEV] r5 0x0 0x0 05:672 00:106 AAPL: #[EB|H:IS] 0 05:822 00:149 AAPL: #[EB|WL:MODE] 0 05:928 00:106 AAPL: #[EB|CFG:ARG] boot-save-log 0x0000000000000002 (0x0000000000000002 < 0xFFFFFFFFFFFFFFFF) default 06:067 00:139 AAPL: #[EB|CFG:ARG] wake-save-log 0x0000000000000002 (0x0000000000000002 < 0x0000000000000002) default 06:173 00:105 AAPL: #[EB|CFG:ARG] console      0x0000000000000001 (0x0000000000000001 < 0x0000000000000001) default 06:313 00:139 AAPL: #[EB|CFG:ARG] serial       0x0000000000000001 (0x0000000000000001 < 0x0000000000000000) default 06:419 00:105 AAPL: #[EB|CFG:ARG] preoslog     0x0000000000000001 (0x0000000000000001 < 0xFFFFFFFFFFFFFFFF) default 06:531 00:111 AAPL: #[EB|CFG:ARG] timestamps   0x0000000000000000 (0x0000000000000000 < 0xFFFFFFFFFFFFFFFF) default 06:677 00:145 AAPL: #[EB|CFG:ARG] log-level    0x0000000000000001 (0x0000000000000001 & 0x0000000000000021) default 06:783 00:106 AAPL: #[EB|CFG:ARG] breakpoint   0x0000000000000000 (0x0000000000000000 & 0x0000000000000000) default 06:933 00:149 AAPL: #[EB|CFG:ARG] kc-read-size 0x0000000000100000 (0x0000000000100000 < 0xFFFFFFFFFFFFFFFF) default 07:039 00:106 AAPL: #[EB|CFG:ARG] force-error  0x0000000000000000 (0x0000000000000000 & 0x0000000000000000) default 07:180 00:140 AAPL: #[EB|H:IS] 0 07:286 00:105 AAPL: #[EB|WL] 0 0 0x01 0x01  0 0x00 07:426 00:140 AAPL: #[EB|BRD:NV] Mac-27AD2F918AE68F61 07:532 00:105 AAPL: #[EB|B:VAw] 07:637 00:105 AAPL: #[EB|B:IAw] 07:786 00:148 AAPL: #[EB|WL] 0 0 0x01 0x01  2 0x00 07:895 00:109 AAPL: #[EB.BST.IDT|+] 08:036 00:140 AAPL: #[EB.BST.IDT|-] 08:142 00:106 AAPL: #[EB|WL] 0 0 0x01 0x01  3 0x00 08:281 00:139 AAPL: #[EB|WL] 0 0 0x01 0x01  4 0x00 08:387 00:105 AAPL: #[EB|BRD:NV] Mac-27AD2F918AE68F61 08:493 00:105 AAPL: #[EB|WL] 0 0 0x01 0x01  5 0x00 08:631 00:137 AAPL: #[EB.H.CHK|BM] 0x0000000000000000 08:736 00:105 AAPL: #[EB.H.LV|!] Err(0xE) <- RT.GV boot-signature 7C436110-AB2A-4BBB-A880-FE41995C9F82 08:888 00:151 AAPL: #[EB|WL] 0 0 0x01 0x01 23 0x0E 08:993 00:105 AAPL: #[EB.H.LV|!] Err(0xE) <- RT.GV boot-image-key 7C436110-AB2A-4BBB-A880-FE41995C9F82 09:132 00:139 AAPL: #[EB|WL] 0 0 0x01 0x01 24 0x0E 09:237 00:105 AAPL: #[EB.H.LV|!] Err(0xE) <- RT.GV boot-image 7C436110-AB2A-4BBB-A880-FE41995C9F82 09:386 00:148 AAPL: #[EB.H.LV|!] Err(0xE) <- RT.SV- boot-signature 7C436110-AB2A-4BBB-A880-FE41995C9F82 09:498 00:112 AAPL: #[EB.H.LV|!] Err(0xE) <- RT.SV- boot-image-key 7C436110-AB2A-4BBB-A880-FE41995C9F82 09:607 00:108 AAPL: #[EB.H.LV|!] Err(0xE) <- RT.SV- boot-image 7C436110-AB2A-4BBB-A880-FE41995C9F82 09:755 00:148 AAPL: #[EB|H:NOT] 09:862 00:106 AAPL: #[EB|SB:P] 0x0 10:002 00:139 AAPL: #[EB|LIMG:DP] Acpi(PNP0A03,0)/Pci(1A|7)/Usb(5, 0)/HD(Part2,Sig853D07D3-0F0E-4C2B-97C8-A1553D709BAD) 10:108 00:106 AAPL: #[EB|LIMG:FP] \System\Library\CoreServices\boot.efi 10:247 00:139 AAPL: #[EB|LIMG:OPT] 10:363 00:115 AAPL: #[EB|RPS] 0 0 0 10:700 00:337 AAPL: #[EB.OPT.LXF|F] <"\\System\\Library\\CoreServices\\com.apple.Boot.plist"> 10:806 00:106 AAPL: #[EB.LD.LF|IN] 0 1 <"\\System\\Library\\CoreServices\\com.apple.Boot.plist"> <"0"> 10:918 00:112 AAPL: #[EB.LD.OFS|OPEN!] Err(0xE) <"\\System\\Library\\CoreServices\\com.apple.Boot.plist"> 11:067 00:148 AAPL: #[EB.OPT.LXF|LF!] Err(0xE) 11:173 00:106 AAPL: #[EB.OPT.LXF|F] <"Library\\Preferences\\SystemConfiguration\\com.apple.Boot.plist"> 11:314 00:140 AAPL: #[EB.LD.LF|IN] 0 1 <"Library\\Preferences\\SystemConfiguration\\com.apple.Boot.plist"> <"0"> 11:444 00:129 AAPL: #[EB|KF] <"root-dmg=file:///BaseSystem/BaseSystem.dmg"> 11:583 00:139 AAPL: #[EB|MBA:CL] <""> 11:690 00:106 AAPL: #[EB|MBA:NV] <"-v debug=0x100 -no_compat_check amfi_get_out_of_my_way=0x1 -amd_no_dgpu_accel keepsyms=1 -lilubetaall ipc_control_port_options=0 alcid=28"> 11:796 00:106 AAPL: #[EB|MBA:KF] <"root-dmg=file:///BaseSystem/BaseSystem.dmg"> 11:943 00:146 AAPL: #[EB|MBA:OUT] <"-v debug=0x100 -no_compat_check amfi_get_out_of_my_way=0x1 -amd_no_dgpu_accel keepsyms=1 -lilubetaall ipc_control_port_options=0 alcid=28 root-dmg=file:///BaseSystem/BaseSystem.dmg"> 12:049 00:106 AAPL: #[EB|LOG:VERBOSE] 2023-12-03T11:56:59 12:186 00:137 AAPL: #[EB|OPT:BM] 0x82 12:299 00:112 AAPL: #[EB|P:CPR] N 12:436 00:136 AAPL: #[EB|P:MPI] N 12:543 00:106 AAPL: #[EB|P:BPI] N 12:650 00:106 AAPL: #[EB.OPT.RKS|!] Err(0xE) <- BS.LocP EDB4A040-6D8A-11EC-8FAD-3E22FB93ADCF 12:803 00:153 AAPL: #[EB|KMR] 204578816 12:910 00:106 AAPL: #[EB.CS.CSKSD|+] 13:059 00:148 AAPL: #[EB.CS.CSKSD|!] Err(0xE) <- RT.GV boot-info-payload 8D63D4FE-BD3C-4AAD-881D-86FD974BC1DF 13:165 00:106 AAPL: #[EB.G.CS|-?] Ok(0) 13:598 00:432 AAPL: #[EB.LD.LF|IN] 0 1 <"<null string>"> <"1"> 13:782 00:184 AAPL: #[EB.B.SBS|SZ] 723512 13:933 00:150 AAPL: #[EB|B:SHA] <b1e47ec9ae2d59ba0b18756ffd99abe85af8d370> 14:048 00:114 AAPL: #[EB.WL.PWLFNV|!] Err(0xE) <- RT.GV wake-failure 7C436110-AB2A-4BBB-A880-FE41995C9F82 14:155 00:107 AAPL: #[EB.WL.DT|!] Err(0xE) <- EB.WL.PWLFNV 14:305 00:149 AAPL: #[EB|WL:DT] 0x00c20000 14:413 00:108 AAPL: #[EB.LD.LKC|D] <"System\Library\KernelCollections\BootKernelExtensions.kc.development"> 14:568 00:154 AAPL: #[EB.LD.OFS|OPEN!] Err(0xE) <"System\\Library\\KernelCollections\\BootKernelExtensions.kc.development"> 14:676 00:107 AAPL: #[EB.LD.LKC|R.2] <"System\Library\KernelCollections\BootKernelExtensions.kc"> 23:101 08:425 AAPL: #[EB.LD.LKFS|-?] Ok(0) 23:238 00:136 AAPL: #[EB.LD.LKC|-?] Ok(0) 23:344 00:106 AAPL: #[EB|BST:REV1] 23:488 00:144 AAPL: #[EB|CSR:IN] 0x00000040 23:595 00:106 AAPL: #[EB|CSR:OUT] 0x00000040 23:759 00:164 AAPL: #[EB.BST.FBS|+] 23:867 00:107 AAPL: #[EB.BST.FBS|ADSZ] 0 24:008 00:141 AAPL: #[EB.BST.FBS|KSSZ] 0 24:115 00:107 AAPL: #[EB|SB:SBGMFNS] x86legacyap.im4m 24:256 00:140 AAPL: #[EB|RH:PF] usr\standalone\OS.dmg.root_hash 24:369 00:112 AAPL: #[EB|RH:MF] <"usr\\standalone\\OS.dmg.root_hash.x86legacyap.im4m"> 24:482 00:113 AAPL: #[EB.LD.LF|IN] 0 1 <"usr\\standalone\\OS.dmg.root_hash"> <"0"> 24:636 00:154 AAPL: #[EB.LD.OFS|OPEN!] Err(0xE) <"usr\\standalone\\OS.dmg.root_hash"> 24:743 00:107 AAPL: #[EB.RH.LRH|P!] Err(0xE) <- EB.LD.LF 24:883 00:140 AAPL: #[EB.BST.FBS|!] Err(0xE) <- EB.RH.LRH 24:990 00:106 AAPL: #[EB|LOG:DT] 2023-12-03T11:57:12 25:130 00:139 AAPL: #[EB|LOG:EXITBS:START] 2023-12-03T11:57:12  Edited December 3, 2023 by GuyEvans added extra screenshot of bios Quote Link to comment https://www.insanelymac.com/forum/topic/357369-hp-z800-ventura-trying-to-follow-successful-instructions-from-another-user-but-not-working-for-me-can-anyone-help/page/3/#findComment-2814187 Share on other sites More sharing options...
sok5 Posted December 3, 2023 Share Posted December 3, 2023 6 hours ago, GuyEvans said:   Thank you again. I'm still trying to install Sonoma. I did notice some mistakes in my bios which I have now fixed and I still have one mistake in my bios which I can't seem to solve. My bios shows these settings below:   and I noticed your bios shows a slightly different screen below: It has an extra option at the bottom which reads "Enhanced Memory Performance". See below:  I can't seem to get that option, and maybe that is why my system will not install Sonoma?  I am using Bios 786G5 v3.61. (from 'System Information).  Thanks for your help, and if you can offer any help on how to make my bios settings the same as yours i'd be very grateful. It would be great if I can install Sonoma on my HP Z800. I really hope so.  (Also it's great to read that you have just installed Sonomo 14.1.2, that is amazing to read!) Thanks again for all of your help in the past, i'm really grateful. And i will keep trying.  Also shown below is my 'System Information' page from my bios:  Once again any help at all to help me solve this would be much appreciated.  Could the problem be because I don't have a "pci Fenvi FV-T919" wifi card. I'm using a BCM94360CS2 Wifi Card and PCI Express Adaptor (Mac Compliant)  Here is my most recent error log:  00:000 00:000 OCS: No schema for FixupAppleEfiImages at 8 index, context <Quirks>! 04:765 04:765 AAPL: #[EB.H.IS|!] Err(0xE) <- RT.GV boot-signature 7C436110-AB2A-4BBB-A880-FE41995C9F82 04:913 00:147 AAPL: #[EB.H.IS|!] Err(0xE) <- RT.GV boot-image-key 7C436110-AB2A-4BBB-A880-FE41995C9F82 05:021 00:107 AAPL: #[EB|H:IS] 0 05:129 00:108 AAPL: #[EB|LOG:INIT] 2023-12-03T11:56:52 05:247 00:117 AAPL: #[EB|VERSION] <"bootbase.efi 580~439 (Official), built 2023-08-05T06:56:06-0700"> 05:353 00:106 AAPL: #[EB|BUILD] <"BUILD-INFO[400]:{"DisplayName":"bootbase.efi","DisplayVersion":"580~439","RecordUuid":"08567299-4618-43B8-9137-4F6F99975A72","BuildTime":"2023-08-05T06:56:06-0700","ProjectName":"efiboot","ProductName":"bootbase.efi","SourceVersion":"580","BuildVersion":"439","BuildConfiguration":"Release","BuildType":"Official","Compiler":"clang-1500.0.37.1","SdkVersion":"14.0","SdkBuild":"23A316","TargetArchitectures":"x86_64"}"> 05:460 00:106 AAPL: #[EB.CFG.DEV|!] Err(0xE) <- RT.GV booter-strict-xmlparser 7C436110-AB2A-4BBB-A880-FE41995C9F82 05:566 00:106 AAPL: #[EB|CFG:DEV] r5 0x0 0x0 05:672 00:106 AAPL: #[EB|H:IS] 0 05:822 00:149 AAPL: #[EB|WL:MODE] 0 05:928 00:106 AAPL: #[EB|CFG:ARG] boot-save-log 0x0000000000000002 (0x0000000000000002 < 0xFFFFFFFFFFFFFFFF) default 06:067 00:139 AAPL: #[EB|CFG:ARG] wake-save-log 0x0000000000000002 (0x0000000000000002 < 0x0000000000000002) default 06:173 00:105 AAPL: #[EB|CFG:ARG] console      0x0000000000000001 (0x0000000000000001 < 0x0000000000000001) default 06:313 00:139 AAPL: #[EB|CFG:ARG] serial       0x0000000000000001 (0x0000000000000001 < 0x0000000000000000) default 06:419 00:105 AAPL: #[EB|CFG:ARG] preoslog     0x0000000000000001 (0x0000000000000001 < 0xFFFFFFFFFFFFFFFF) default 06:531 00:111 AAPL: #[EB|CFG:ARG] timestamps   0x0000000000000000 (0x0000000000000000 < 0xFFFFFFFFFFFFFFFF) default 06:677 00:145 AAPL: #[EB|CFG:ARG] log-level    0x0000000000000001 (0x0000000000000001 & 0x0000000000000021) default 06:783 00:106 AAPL: #[EB|CFG:ARG] breakpoint   0x0000000000000000 (0x0000000000000000 & 0x0000000000000000) default 06:933 00:149 AAPL: #[EB|CFG:ARG] kc-read-size 0x0000000000100000 (0x0000000000100000 < 0xFFFFFFFFFFFFFFFF) default 07:039 00:106 AAPL: #[EB|CFG:ARG] force-error  0x0000000000000000 (0x0000000000000000 & 0x0000000000000000) default 07:180 00:140 AAPL: #[EB|H:IS] 0 07:286 00:105 AAPL: #[EB|WL] 0 0 0x01 0x01  0 0x00 07:426 00:140 AAPL: #[EB|BRD:NV] Mac-27AD2F918AE68F61 07:532 00:105 AAPL: #[EB|B:VAw] 07:637 00:105 AAPL: #[EB|B:IAw] 07:786 00:148 AAPL: #[EB|WL] 0 0 0x01 0x01  2 0x00 07:895 00:109 AAPL: #[EB.BST.IDT|+] 08:036 00:140 AAPL: #[EB.BST.IDT|-] 08:142 00:106 AAPL: #[EB|WL] 0 0 0x01 0x01  3 0x00 08:281 00:139 AAPL: #[EB|WL] 0 0 0x01 0x01  4 0x00 08:387 00:105 AAPL: #[EB|BRD:NV] Mac-27AD2F918AE68F61 08:493 00:105 AAPL: #[EB|WL] 0 0 0x01 0x01  5 0x00 08:631 00:137 AAPL: #[EB.H.CHK|BM] 0x0000000000000000 08:736 00:105 AAPL: #[EB.H.LV|!] Err(0xE) <- RT.GV boot-signature 7C436110-AB2A-4BBB-A880-FE41995C9F82 08:888 00:151 AAPL: #[EB|WL] 0 0 0x01 0x01 23 0x0E 08:993 00:105 AAPL: #[EB.H.LV|!] Err(0xE) <- RT.GV boot-image-key 7C436110-AB2A-4BBB-A880-FE41995C9F82 09:132 00:139 AAPL: #[EB|WL] 0 0 0x01 0x01 24 0x0E 09:237 00:105 AAPL: #[EB.H.LV|!] Err(0xE) <- RT.GV boot-image 7C436110-AB2A-4BBB-A880-FE41995C9F82 09:386 00:148 AAPL: #[EB.H.LV|!] Err(0xE) <- RT.SV- boot-signature 7C436110-AB2A-4BBB-A880-FE41995C9F82 09:498 00:112 AAPL: #[EB.H.LV|!] Err(0xE) <- RT.SV- boot-image-key 7C436110-AB2A-4BBB-A880-FE41995C9F82 09:607 00:108 AAPL: #[EB.H.LV|!] Err(0xE) <- RT.SV- boot-image 7C436110-AB2A-4BBB-A880-FE41995C9F82 09:755 00:148 AAPL: #[EB|H:NOT] 09:862 00:106 AAPL: #[EB|SB:P] 0x0 10:002 00:139 AAPL: #[EB|LIMG:DP] Acpi(PNP0A03,0)/Pci(1A|7)/Usb(5, 0)/HD(Part2,Sig853D07D3-0F0E-4C2B-97C8-A1553D709BAD) 10:108 00:106 AAPL: #[EB|LIMG:FP] \System\Library\CoreServices\boot.efi 10:247 00:139 AAPL: #[EB|LIMG:OPT] 10:363 00:115 AAPL: #[EB|RPS] 0 0 0 10:700 00:337 AAPL: #[EB.OPT.LXF|F] <"\\System\\Library\\CoreServices\\com.apple.Boot.plist"> 10:806 00:106 AAPL: #[EB.LD.LF|IN] 0 1 <"\\System\\Library\\CoreServices\\com.apple.Boot.plist"> <"0"> 10:918 00:112 AAPL: #[EB.LD.OFS|OPEN!] Err(0xE) <"\\System\\Library\\CoreServices\\com.apple.Boot.plist"> 11:067 00:148 AAPL: #[EB.OPT.LXF|LF!] Err(0xE) 11:173 00:106 AAPL: #[EB.OPT.LXF|F] <"Library\\Preferences\\SystemConfiguration\\com.apple.Boot.plist"> 11:314 00:140 AAPL: #[EB.LD.LF|IN] 0 1 <"Library\\Preferences\\SystemConfiguration\\com.apple.Boot.plist"> <"0"> 11:444 00:129 AAPL: #[EB|KF] <"root-dmg=file:///BaseSystem/BaseSystem.dmg"> 11:583 00:139 AAPL: #[EB|MBA:CL] <""> 11:690 00:106 AAPL: #[EB|MBA:NV] <"-v debug=0x100 -no_compat_check amfi_get_out_of_my_way=0x1 -amd_no_dgpu_accel keepsyms=1 -lilubetaall ipc_control_port_options=0 alcid=28"> 11:796 00:106 AAPL: #[EB|MBA:KF] <"root-dmg=file:///BaseSystem/BaseSystem.dmg"> 11:943 00:146 AAPL: #[EB|MBA:OUT] <"-v debug=0x100 -no_compat_check amfi_get_out_of_my_way=0x1 -amd_no_dgpu_accel keepsyms=1 -lilubetaall ipc_control_port_options=0 alcid=28 root-dmg=file:///BaseSystem/BaseSystem.dmg"> 12:049 00:106 AAPL: #[EB|LOG:VERBOSE] 2023-12-03T11:56:59 12:186 00:137 AAPL: #[EB|OPT:BM] 0x82 12:299 00:112 AAPL: #[EB|P:CPR] N 12:436 00:136 AAPL: #[EB|P:MPI] N 12:543 00:106 AAPL: #[EB|P:BPI] N 12:650 00:106 AAPL: #[EB.OPT.RKS|!] Err(0xE) <- BS.LocP EDB4A040-6D8A-11EC-8FAD-3E22FB93ADCF 12:803 00:153 AAPL: #[EB|KMR] 204578816 12:910 00:106 AAPL: #[EB.CS.CSKSD|+] 13:059 00:148 AAPL: #[EB.CS.CSKSD|!] Err(0xE) <- RT.GV boot-info-payload 8D63D4FE-BD3C-4AAD-881D-86FD974BC1DF 13:165 00:106 AAPL: #[EB.G.CS|-?] Ok(0) 13:598 00:432 AAPL: #[EB.LD.LF|IN] 0 1 <"<null string>"> <"1"> 13:782 00:184 AAPL: #[EB.B.SBS|SZ] 723512 13:933 00:150 AAPL: #[EB|B:SHA] <b1e47ec9ae2d59ba0b18756ffd99abe85af8d370> 14:048 00:114 AAPL: #[EB.WL.PWLFNV|!] Err(0xE) <- RT.GV wake-failure 7C436110-AB2A-4BBB-A880-FE41995C9F82 14:155 00:107 AAPL: #[EB.WL.DT|!] Err(0xE) <- EB.WL.PWLFNV 14:305 00:149 AAPL: #[EB|WL:DT] 0x00c20000 14:413 00:108 AAPL: #[EB.LD.LKC|D] <"System\Library\KernelCollections\BootKernelExtensions.kc.development"> 14:568 00:154 AAPL: #[EB.LD.OFS|OPEN!] Err(0xE) <"System\\Library\\KernelCollections\\BootKernelExtensions.kc.development"> 14:676 00:107 AAPL: #[EB.LD.LKC|R.2] <"System\Library\KernelCollections\BootKernelExtensions.kc"> 23:101 08:425 AAPL: #[EB.LD.LKFS|-?] Ok(0) 23:238 00:136 AAPL: #[EB.LD.LKC|-?] Ok(0) 23:344 00:106 AAPL: #[EB|BST:REV1] 23:488 00:144 AAPL: #[EB|CSR:IN] 0x00000040 23:595 00:106 AAPL: #[EB|CSR:OUT] 0x00000040 23:759 00:164 AAPL: #[EB.BST.FBS|+] 23:867 00:107 AAPL: #[EB.BST.FBS|ADSZ] 0 24:008 00:141 AAPL: #[EB.BST.FBS|KSSZ] 0 24:115 00:107 AAPL: #[EB|SB:SBGMFNS] x86legacyap.im4m 24:256 00:140 AAPL: #[EB|RH:PF] usr\standalone\OS.dmg.root_hash 24:369 00:112 AAPL: #[EB|RH:MF] <"usr\\standalone\\OS.dmg.root_hash.x86legacyap.im4m"> 24:482 00:113 AAPL: #[EB.LD.LF|IN] 0 1 <"usr\\standalone\\OS.dmg.root_hash"> <"0"> 24:636 00:154 AAPL: #[EB.LD.OFS|OPEN!] Err(0xE) <"usr\\standalone\\OS.dmg.root_hash"> 24:743 00:107 AAPL: #[EB.RH.LRH|P!] Err(0xE) <- EB.LD.LF 24:883 00:140 AAPL: #[EB.BST.FBS|!] Err(0xE) <- EB.RH.LRH 24:990 00:106 AAPL: #[EB|LOG:DT] 2023-12-03T11:57:12 25:130 00:139 AAPL: #[EB|LOG:EXITBS:START] 2023-12-03T11:57:12   I have the bio (786G5 V3.61) Same wifi. Do you have usb3 installed? Keep trying don't give up. When my first installation, it's taking me 3 months before I successfully installed by trails and errors. I am not sure what's wrong with your system. Hopefully someone can read and understand your errors log. Quote Link to comment https://www.insanelymac.com/forum/topic/357369-hp-z800-ventura-trying-to-follow-successful-instructions-from-another-user-but-not-working-for-me-can-anyone-help/page/3/#findComment-2814205 Share on other sites More sharing options...
GuyEvans Posted December 3, 2023 Author Share Posted December 3, 2023 @sok5 I don't have that USB3 card, do you think that could be why my system isn't installing Sonoma. Do you recommend me buying that card? Â Many thanks again, I will keep trying and see if anyone can help me debug my error log. Quote Link to comment https://www.insanelymac.com/forum/topic/357369-hp-z800-ventura-trying-to-follow-successful-instructions-from-another-user-but-not-working-for-me-can-anyone-help/page/3/#findComment-2814216 Share on other sites More sharing options...
sok5 Posted December 4, 2023 Share Posted December 4, 2023 (edited) It's possible, If you read post above by Nenu. He/she run into a problem without usb3 installed. After that installation was completed. When you're finish and run post OpenCore legacy patcher, this hackintosh will run without usb3.   HP z800 working with the latest MacOs Edited January 7, 2024 by sok5 Quote Link to comment https://www.insanelymac.com/forum/topic/357369-hp-z800-ventura-trying-to-follow-successful-instructions-from-another-user-but-not-working-for-me-can-anyone-help/page/3/#findComment-2814224 Share on other sites More sharing options...
nenu Posted February 1, 2024 Share Posted February 1, 2024 @sok5Â did you try 14.3 ? Quote Link to comment https://www.insanelymac.com/forum/topic/357369-hp-z800-ventura-trying-to-follow-successful-instructions-from-another-user-but-not-working-for-me-can-anyone-help/page/3/#findComment-2816128 Share on other sites More sharing options...
sok5 Posted February 1, 2024 Share Posted February 1, 2024 41 minutes ago, nenu said: @sok5Â did you try 14.3 ? Â yes, it's working for me Quote Link to comment https://www.insanelymac.com/forum/topic/357369-hp-z800-ventura-trying-to-follow-successful-instructions-from-another-user-but-not-working-for-me-can-anyone-help/page/3/#findComment-2816130 Share on other sites More sharing options...
nenu Posted February 7, 2024 Share Posted February 7, 2024 @sok5 are you having any mic issue with teams where sound is low quality ? Quote Link to comment https://www.insanelymac.com/forum/topic/357369-hp-z800-ventura-trying-to-follow-successful-instructions-from-another-user-but-not-working-for-me-can-anyone-help/page/3/#findComment-2816451 Share on other sites More sharing options...
sok5 Posted February 7, 2024 Share Posted February 7, 2024 1 hour ago, nenu said: @sok5 are you having any mic issue with teams where sound is low quality ? I have not use mic, use monitor speakers for sound. Quote Link to comment https://www.insanelymac.com/forum/topic/357369-hp-z800-ventura-trying-to-follow-successful-instructions-from-another-user-but-not-working-for-me-can-anyone-help/page/3/#findComment-2816461 Share on other sites More sharing options...
nenu Posted September 1, 2024 Share Posted September 1, 2024 @sok5have u tried sequoia on z800 ? Quote Link to comment https://www.insanelymac.com/forum/topic/357369-hp-z800-ventura-trying-to-follow-successful-instructions-from-another-user-but-not-working-for-me-can-anyone-help/page/3/#findComment-2824605 Share on other sites More sharing options...
sok5 Posted September 1, 2024 Share Posted September 1, 2024 8 hours ago, nenu said: @sok5have u tried sequoia on z800 ? I have not tried Sequoia with Z800. I am testing on newer HP Z840, it's working with os 15 beta8. 1 Quote Link to comment https://www.insanelymac.com/forum/topic/357369-hp-z800-ventura-trying-to-follow-successful-instructions-from-another-user-but-not-working-for-me-can-anyone-help/page/3/#findComment-2824612 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.