noisegate Posted July 19, 2023 Share Posted July 19, 2023 Hi everyone, I'm struggling to boot into a Monterey USB installer from @MaLd0n (my setup is currently working fine with Mojave). No luck so far, either from your Clover or OpenCore EFI folder. I'm trying to do a clean install on a new drive but I still end up with a kernel panic. Here's what I tried: CLOVER: Adding/removing a few of my Mojave kexts to the ones from the X79 EFI folder: AMDRadeonPro.kext AppleIntelE1000e.kext EFICheckDisabler.kext FakeSMC.kext NoVPAJpeg.kext Adding/removing some of the Mojave boot args that are not in the Monterey config.plist dart=0 keepsyms=1 debug=0x100 shikigva=32 shiki-id=Mac-7BA5B2D9E42DDD94 alcid=1 -- OPENCORE: Initially going with your Desktop IvyBridge EFI -> failure Removed agdpmod=pikera in boot-args as I don't have a NAVI card Going with the setup from this thread: https://www.olarila.com/topic/21661-mac-os-montereybig-sur-on-huananzhi-and-other-x79-motherboard-and-powermanagement/ I attached a SS of what I'm getting when I try to boot with OpenCore Thanks in advance! Link to comment Share on other sites More sharing options...
MaLd0n Posted July 19, 2023 Share Posted July 19, 2023 Seems old kexts and bootloader version try update all and remove all unnecessary things Link to comment Share on other sites More sharing options...
noisegate Posted July 20, 2023 Author Share Posted July 20, 2023 Hey there @MaLd0n, I tried as much as I could, I don't know what else to look for. I'm at a point where I'm thinking about buying a real Mac... Link to comment Share on other sites More sharing options...
bisdak4920 Posted July 20, 2023 Share Posted July 20, 2023 For Ivy Bridge you need to have CryptexFixup.Kext. Update all your kext to latest and you can remove all boot args. Link to comment Share on other sites More sharing options...
Slice Posted July 21, 2023 Share Posted July 21, 2023 On 7/19/2023 at 2:17 PM, noisegate said: Hi everyone, I'm struggling to boot into a Monterey USB installer from @MaLd0n (my setup is currently working fine with Mojave). No luck so far, either from your Clover or OpenCore EFI folder. I'm trying to do a clean install on a new drive but I still end up with a kernel panic. Here's what I tried: CLOVER: Adding/removing a few of my Mojave kexts to the ones from the X79 EFI folder: AMDRadeonPro.kext AppleIntelE1000e.kext EFICheckDisabler.kext FakeSMC.kext NoVPAJpeg.kext Adding/removing some of the Mojave boot args that are not in the Monterey config.plist dart=0 keepsyms=1 debug=0x100 shikigva=32 shiki-id=Mac-7BA5B2D9E42DDD94 alcid=1 -- OPENCORE: Initially going with your Desktop IvyBridge EFI -> failure Removed agdpmod=pikera in boot-args as I don't have a NAVI card Going with the setup from this thread: https://www.olarila.com/topic/21661-mac-os-montereybig-sur-on-huananzhi-and-other-x79-motherboard-and-powermanagement/ I attached a SS of what I'm getting when I try to boot with OpenCore Thanks in advance! Looking into the photo I have to suppose bootarg npci=0x3000 11 hours ago, bisdak4920 said: For Ivy Bridge you need to have CryptexFixup.Kext. Update all your kext to latest and you can remove all boot args. Not needed. I installed Monterey onto X79 IvyBridge-E5 without the kext. 2 Link to comment Share on other sites More sharing options...
noisegate Posted July 21, 2023 Author Share Posted July 21, 2023 (edited) On 7/19/2023 at 4:39 PM, MaLd0n said: Seems old kexts and bootloader version try update all and remove all unnecessary things Hi @MaLd0n and all, thanks for the help. The EFI folder comes from you, with all updated kexts. OC is v0.9.3, so I'm not sure where the old files come from. As to what to add/remove, all I've tried got me the same panic... I'll try npci=0x3000 when I get back from holiday Thanks Edited July 21, 2023 by noisegate Link to comment Share on other sites More sharing options...
noisegate Posted September 3, 2023 Author Share Posted September 3, 2023 Hi @MaLd0n, @Slice. No luck so far. npci=0x3000 still gives a kernel panic. I don't get what's wrong... Link to comment Share on other sites More sharing options...
Slice Posted September 10, 2023 Share Posted September 10, 2023 May be you have other panic now? Link to comment Share on other sites More sharing options...
noisegate Posted September 14, 2023 Author Share Posted September 14, 2023 Hi @Slice, thanks for getting back to me. Yes you must be right. My AIO cpu cooler just let me down, I’ll let you know as soon as I have it replaced Link to comment Share on other sites More sharing options...
noisegate Posted September 28, 2023 Author Share Posted September 28, 2023 Hi @MaLd0n, @Slice. I finally got a new CPU cooler and some time to send the kernel panic I apologize for the blurry image, the light was poor, but it's readable Thanks! Link to comment Share on other sites More sharing options...
noisegate Posted October 4, 2023 Author Share Posted October 4, 2023 Hi @MaLd0n, @Slice, can you make any sense of this panic screenshot? Thanks Link to comment Share on other sites More sharing options...
lidiano Posted October 4, 2023 Share Posted October 4, 2023 Hi everyone, I'm asking for a lot of help, I'm in trouble, I've always had "P9X79 deluxe" hackintosh on my computer, but all of a sudden it doesn't work anymore and I can't install OSX anymore, can you help me, what am I doing wrong ? I tried with this EFI, but the installation doesn't start EFI.zip Link to comment Share on other sites More sharing options...
Slice Posted October 18, 2023 Share Posted October 18, 2023 On 10/4/2023 at 6:34 PM, noisegate said: Hi @MaLd0n, @Slice, can you make any sense of this panic screenshot? Thanks The panic is with CpuTscSync.kext. I know this panic so I used VoodooTSCSync.kext instead. On 10/4/2023 at 8:43 PM, lidiano said: Hi everyone, I'm asking for a lot of help, I'm in trouble, I've always had "P9X79 deluxe" hackintosh on my computer, but all of a sudden it doesn't work anymore and I can't install OSX anymore, can you help me, what am I doing wrong ? I tried with this EFI, but the installation doesn't start EFI.zip 4.78 MB · 5 downloads Show what is happen. 1 Link to comment Share on other sites More sharing options...
noisegate Posted November 9, 2023 Author Share Posted November 9, 2023 (edited) Hi @MaLd0n, @Slice, Booting directly into the Monterey USB drive from F8 with VoodooTSCSync.kext instead of CpuTscSync.kext automatically switches to another boot option, I don't even enter setup. Booting into my Mojave EFI partition and then selecting the Monterey USB drive from the Clover menu gets me to the Apple logo but I get stuck there. It's weird because I have the -v bootarg but I can't see verbose. My setup doesn't agree with Clover_r5155, I had to roll back Any ideas? Thanks Edited November 9, 2023 by noisegate Link to comment Share on other sites More sharing options...
Recommended Posts