Jump to content

[Guide] ASUS P8B75-M/CSM, Radeon RX 580


3 posts in this topic

Recommended Posts

Update to 13.1

  • Before updating, update all kexts, OC, OCLP etc to latest version
  • Verify config.plist compatible with latest OC
  • Edit config.plist -->NVRAM --> 7C436110-AB2A-4BBB-A880-FE41995C9F82  --> boot-arg --> -v keepsyms=1 debug=0x100 alcid=1 -cryptbeta amfi_get_out_of_my_way=0x1 -amd_no_dgpu_accel
  • Then download and install 13.1
  • Once successfully installed, follow step 9 - 11 in "Post Install"


Latest OpenCore

Latest Kexts: AppleALC, CryptexFixUp, Lilu, RealtekRTL8111, VirtualSMC, WhateverGreen, also SMCProcessor and SMCSuperIO

ACPI: SSDT-EC, SSDT-IMEI, SSDT-PM.  SSDT-PM is for Post Install.

App need: MountEFI, ProperTree, GenSMBIOS, SSDTTime

I use OpenCore Legacy Patcher to make bootable usb for Ventura   or 

sudo /Applications/Install\ macOS\ Ventura.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled


1. After making bootable USB, mount the USB EFI

2. OpenCore --> X64 --> EFI, copy EFI folder to USB

3. In the USB EFI --> Driver --> delete all except OpenRunTime, ResetNvramEntry, and alsoHfsPlusLegacy.  Optional "CrScreenshotDxe": if you want to screenshot OC Boot Menu by pressing F10.

4. In the USB EFI --> Tool --> delete all except OpenShell

5. Copy Kexts from above and put in USB EFI --> OC --> Kexts folder

6. Put SSDT-EC, and SSDT-IMEI in USB EFI --> OC -->ACPI folder

7. From OpenCore --> Docs --> copy Sample.plist to USB EFI --> OC folder and rename as config.plist

8. Launch ProperTree and open config.plist from OC folder

9. Do Cmd-R to load all from OC folder

10. Config.plist setup using this Guide

11. NVRAM --> 7C436110-AB2A-4BBB-A880-FE41995C9F82  --> boot-arg --> -v keepsyms=1 debug=0x100 alcid=1 -cryptbeta amfi_get_out_of_my_way=0x1-amd_no_dgpu_accel

12. Save


Post Install: (internal drive)

1. Mount your SSD EFI

2. Copy EFI from USB to SSD EFI

3. Put SSDT-PM in SSD ACPI folder

4. Launch ProperTree and open config.plist from OC folder

5. Do Cmd-R to load all from OC folder

6. Misc—> Security—> SecureBootModel—>Disabled

7. NVRAM --> 7C436110-AB2A-4BBB-A880-FE41995C9F82  -->csr-active-config --> change from 00000000 to 03080000

8. Save and reboot --> Then do ResetNVRAM

9. Launch OpenCore Legacy Patcher --> Root Patch. Don't restart yet

10. Delete -v and -amd_no_dgpu_accel from NVRAM

11. Save and reboot


I hope I didn't missed any step.


As always thanks to @miliuco, @stagtrader for the help, Dortania's teams, OC teams, InsanelyMac, and @chris1111 for this themes, Flavours-masIOS



Side note:  If you multi-boot (Windows, Mac, Mac, or Ubuntu on separate SSD), follow this guide or this




Note: for Monterey 12.6.1 it's the same except no CryptexFixUp, no -cryptbeta, and no -amd_no_dgpu_accel, no OCLP Patch 

Misc—> Security—> SecureBootModel --> Default

csr-active-config --> stay 00000000

use amfi_get_out_of_my_way=1








Edited by loganMac
13.1 update
  • Like 3
  • Thanks 1
Link to comment
Share on other sites

  • 4 months later...

Ciao posso chiederti aiuto? Ho una 


che non riesco a fare riconoscere al mio hackintosh Ventura mi dà

Scheda grafica schermo 7 mb



Link to comment
Share on other sites


  • Create New...