selphy Posted June 24, 2021 Share Posted June 24, 2021 (edited) Hello guys, I have almost ready EFI, after choose macOS on bootloader it's loading after that pc's restart and then quite long loading (I needed turn on second monitor and after that goes on) and finally I got screen with installation of Catalina, but I just want first change bootloader and maybe later update os. Can you check what can be wrong ? I have 2 monitors connected by DP. 00:000 00:000 AAPL: [EB|#LOG:INIT] 2021-06-23T16:26:20 00:018 00:018 AAPL: [EB|#VERSION] boot.efi 422.100.16~12 (Official), built 2020-02-29T00:57:17-0800 00:034 00:015 AAPL: [EB|#BUILD] BUILD-INFO[302]:{"DisplayName":"boot.efi","DisplayVersion":"422.100.16~12","RecordUuid":"AAF42922-13FE-44A3-A69C-7D0198F7BFA2","BuildTime":"2020-02-29T00:57:17-0800","ProjectName":"efiboot","ProductName":"boot.efi","SourceVersion":"422.100.16","BuildVersion":"12","BuildConfiguration":"Release","BuildType":"Official"} 00:050 00:016 AAPL: [EB|`H:IS] Err(0xE) @ GV boot-signature 00:088 00:037 AAPL: [EB|`H:IS] Err(0xE) @ GV boot-image-key 00:104 00:016 AAPL: [EB|#H:IS] 0 00:127 00:022 AAPL: [EB|#WL:MODE] 0 00:143 00:015 AAPL: [EB|#CONFIG:SRC] <default> 00:159 00:016 AAPL: [EB|#CONFIG| 0] boot-save-log : 0x0000000000000002 (0x0000000000000002 < 0xFFFFFFFFFFFFFFFF) <default> 00:176 00:016 AAPL: [EB|#CONFIG| 1] wake-save-log : 0x0000000000000002 (0x0000000000000002 < 0x0000000000000002) <default> 00:203 00:027 AAPL: [EB|#CONFIG| 2] console : 0x0000000000000001 (0x0000000000000001 < 0x0000000000000001) <default> 00:217 00:014 AAPL: [EB|#CONFIG| 3] serial : 0x0000000000000000 (0x0000000000000000 < 0x0000000000000000) <default> 00:233 00:016 AAPL: [EB|#CONFIG| 4] embed-log-dt : 0x0000000000000000 (0x0000000000000000 < 0x0000000000000000) <default> 00:250 00:016 AAPL: [EB|#CONFIG| 5] timestamps : 0x0000000000000000 (0x0000000000000000 < 0xFFFFFFFFFFFFFFFF) <default> 00:266 00:016 AAPL: [EB|#CONFIG| 6] log-level : 0x0000000000000001 (0x0000000000000001 & 0x0000000000000001) <default> 00:282 00:016 AAPL: [EB|#CONFIG| 7] breakpoint : 0x0000000000000000 (0x0000000000000000 & 0x0000000000000000) <default> 00:298 00:016 AAPL: [EB|#CONFIG| 8] kc-read-size : 0x0000000000100000 (0x0000000000100000 < 0xFFFFFFFFFFFFFFFF) <default> 00:315 00:016 AAPL: [EB|#WL|0] 0x01 0x01 0 0x00 00:332 00:016 AAPL: [EB|#BRD:NV] Mac-AA95B1DDAB278B95 00:348 00:016 AAPL: [EB|#WL|1] 0x01 0x01 2 0x00 00:364 00:016 AAPL: [EB|`BST:IDT] { 00:385 00:020 AAPL: [EB|`BST:IDT] } 00:401 00:016 AAPL: [EB|#WL|2] 0x01 0x01 3 0x00 00:418 00:016 AAPL: [EB|#WL|3] 0x01 0x01 4 0x00 00:434 00:016 AAPL: [EB|#BRD:NV] Mac-AA95B1DDAB278B95 00:450 00:016 AAPL: [EB|#WL|4] 0x01 0x01 5 0x00 00:466 00:016 AAPL: [EB|`H:CHK] BM: 0x0000000000000000 00:483 00:016 AAPL: [EB|`H:CHK] Err(0xE) @ GV boot-signature 00:499 00:016 AAPL: [EB|#WL|5] 0x01 0x01 23 0x0E 00:515 00:016 AAPL: [EB|`H:CPM] Err(0xE), (24, 24) @ GV Persistent-memory-note 00:531 00:016 AAPL: [EB|#SB:P] 0x1 00:547 00:015 AAPL: [EB|`B:MN] BM: +SB 00:566 00:018 AAPL: [EB|#LIMG:DP] Acpi(PNP0A03,0)/Pci(1D|0)/Pci(0|0)/?[ 0x83 0x17 0x10 0x0 0x1 0x0 0x0 0x0 0x0 0x25 0x38 0x55 0x81 0xB2 0x5B 0x94 ]/HD(Part2,Sig50C970CA-E5B9-4333-8F0E-31CF88362B1B)/VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842) 00:581 00:015 AAPL: [EB|#LIMG:FP] \8D5D2878-4FC7-4798-8BB0-4427329FEDCA\System\Library\CoreServices\boot.efi 00:597 00:015 AAPL: [EB|#LIMG:OPT] () 00:613 00:016 AAPL: [EB|`OPT:LXF] 'LF (\\8D5D2878-4FC7-4798-8BB0-4427329FEDCA\\System\\Library\\CoreServices\\com.apple.Boot.plist) 00:629 00:015 AAPL: [EB|`LD:LF] FIO: 0, DIR: 1, P: \\8D5D2878-4FC7-4798-8BB0-4427329FEDCA\\System\\Library\\CoreServices\\com.apple.Boot.plist, DP: 0 00:645 00:015 AAPL: [EB|`LD:OFS] Err(0xE) @ OPEN (\\8D5D2878-4FC7-4798-8BB0-4427329FEDCA\\System\\Library\\CoreServices\\com.apple.Boot.plist) 00:661 00:016 AAPL: [EB|`OPT:LXF] Err(0xE) @ 'LF 00:677 00:016 AAPL: [EB|`OPT:LXF] 'LF (Library\\Preferences\\SystemConfiguration\\com.apple.Boot.plist) 00:693 00:016 AAPL: [EB|`LD:LF] FIO: 0, DIR: 1, P: Library\\Preferences\\SystemConfiguration\\com.apple.Boot.plist, DP: 0 00:710 00:016 AAPL: [EB:#KF] () 00:729 00:018 AAPL: [EB|#MBA:CL] () 00:745 00:016 AAPL: [EB|#MBA:NV] (-v keepsyms=1 debug=0x100 alcid=1 agdpmod=pikera shikigva=80 slide=73 ) 00:761 00:016 AAPL: [EB|#MBA:KF] () 00:777 00:016 AAPL: [EB|#MBA:OUT] (-v keepsyms=1 debug=0x100 alcid=1 agdpmod=pikera shikigva=80 slide=73 chunklist-security-epoch=0 -chunklist-no-rev2-dev) 00:793 00:016 AAPL: [EB|#LOG:VERBOSE] 2021-06-23T16:26:21 00:809 00:016 AAPL: [EB|`CSR:S] csr-active-config = 0x00000067 00:825 00:015 AAPL: [EB|#OPT:BM] 0x284182 00:841 00:015 AAPL: [EB|`OPT:LXF] 'LF (\\8D5D2878-4FC7-4798-8BB0-4427329FEDCA\\System\\Library\\CoreServices\\PlatformSupport.plist) 00:857 00:016 AAPL: [EB|`LD:LF] FIO: 0, DIR: 1, P: \\8D5D2878-4FC7-4798-8BB0-4427329FEDCA\\System\\Library\\CoreServices\\PlatformSupport.plist, DP: 0 00:873 00:016 AAPL: [EB|#B:VAw] 00:890 00:016 AAPL: [EB|`P:DCCPR] Err(0xE) @ GV AAPL,CoProcessorReboot 00:909 00:018 AAPL: [EB|`P:DCMOSP] Err(0xE) @ GV AAPL,PanicInfo0000 (0) 00:925 00:016 AAPL: [EB|`CS:CSKSD] { 00:941 00:016 AAPL: [EB|`CS:CSKSD] Err(0xE) @ GV 8D63D4FE-BD3C-4AAD-881D-86FD974BC1DF:boot-info-payload 00:957 00:016 AAPL: [EB|#WL|6] 0x01 0x01 6 0x0E 00:973 00:016 AAPL: [EB|`CS:LFC] { 00:989 00:016 AAPL: [EB|`LD:LF] FIO: 0, DIR: 1, P: System\\Library\\Caches\\com.apple.corestorage\\EncryptedRoot.plist.wipekey, DP: 0 01:008 00:018 AAPL: [EB|`FS:AGSVH] Err(0xE) @ LocHB 59D76AE4-37E3-55A7-B460-EF13D46E6020 01:025 00:016 AAPL: [EB|`G:CS] } Ok(0) 01:044 00:019 AAPL: [EB|`LD:LF] FIO: 0, DIR: 1, P: <null string>, DP: 1 01:063 00:018 AAPL: [EB|`B:SBS] SZ: 617016 01:085 00:022 AAPL: [EB|#B:SHA] ddb8f6e752073ca434bd7737e0fde6c51af2f965 01:106 00:021 AAPL: [EB|`WL:PWLFNV] Err(0xE) @ GV wake-failure 01:124 00:017 AAPL: [EB|`WL:DT] Err(0xE) @ WL:PWLFNV 01:142 00:018 AAPL: [EB|`WL:PWLFRTC] ! @ RTC:R 01:160 00:018 AAPL: [EB|`WL:DT] Err(0xE) @ WL:PWLFRTC 01:179 00:018 AAPL: [EB|`FS:AGSVH] Err(0xE) @ 'AGU.0 01:197 00:018 AAPL: [EB|`FS:AGSVH] Err(0xE) @ 'AGU.1 01:215 00:018 AAPL: [EB|`FS:AGSVH] Err(0xE) @ 'AGU.2 01:233 00:018 AAPL: [EB|`FS:AGSVH] Err(0xE) @ 'AGU.3 01:253 00:020 AAPL: [EB|`LD:LKC] SB -> (System\Library\PrelinkedKernels\immutablekernel) 01:275 00:021 AAPL: [EB|`LD:LKC] BPDK -> (System\Library\PrelinkedKernels\immutablekernel.development) 01:300 00:025 AAPL: [EB|`LD:LF] FIO: 0, DIR: 1, P: System\\Library\\PrelinkedKernels\\immutablekernel.development, DP: 0 01:324 00:024 AAPL: [EB|`LD:OFS] Err(0xE) @ OPEN (System\\Library\\PrelinkedKernels\\immutablekernel.development) 01:345 00:020 AAPL: [EB|`LD:LKC] BPDK,!R -> (System\Library\PrelinkedKernels\immutablekernel) 01:367 00:021 AAPL: [EB|`LD:LF] FIO: 0, DIR: 1, P: System\\Library\\PrelinkedKernels\\immutablekernel, DP: 0 02:823 01:456 AAPL: [EB|#SB:HW] j185ap\0 02:851 00:027 AAPL: [EB|#SB:MF] (System\\Library\\PrelinkedKernels\\immutablekernel.j185ap.im4m) 02:873 00:022 AAPL: [EB|`LD:LF] FIO: 0, DIR: 1, P: System\\Library\\PrelinkedKernels\\immutablekernel.j185ap.im4m, DP: 0 02:895 00:022 AAPL: [EB|`LD:OFS] Err(0xE) @ OPEN (System\\Library\\PrelinkedKernels\\immutablekernel.j185ap.im4m) 02:913 00:017 AAPL: [EB|`SB:VK] Err(0xE) @ LD:LF 02:932 00:018 AAPL: [EB|`LD:LKCFFP] Err(0x1A) @ SB:SBVK 02:953 00:021 AAPL: [EB|#WL|7] 0x01 0x41 6 0x0E 02:973 00:019 AAPL: [EB|#REBOOT] 1 02:992 00:019 AAPL: [EB|#LOG:RESET:RECOVERY] 2021-06-23T16:26:23 00:000 00:000 AAPL: [EB|#LOG:INIT] 2021-06-23T16:26:40 00:013 00:013 AAPL: [EB|#VERSION] bootbase.efi 422.100.16~12 (Official), built 2020-02-29T00:59:07-0800 00:028 00:014 AAPL: [EB|#BUILD] BUILD-INFO[310]:{"DisplayName":"bootbase.efi","DisplayVersion":"422.100.16~12","RecordUuid":"FD85960B-6B0F-41D5-8944-A1E80707DC36","BuildTime":"2020-02-29T00:59:07-0800","ProjectName":"efiboot","ProductName":"bootbase.efi","SourceVersion":"422.100.16","BuildVersion":"12","BuildConfiguration":"Release","BuildType":"Official"} 00:042 00:014 AAPL: [EB|`H:IS] Err(0xE) @ GV boot-signature 00:057 00:014 AAPL: [EB|`H:IS] Err(0xE) @ GV boot-image-key 00:071 00:014 AAPL: [EB|#H:IS] 0 00:104 00:033 AAPL: [EB|#WL:MODE] 0 00:126 00:021 AAPL: [EB|#CONFIG:SRC] <default> 00:140 00:014 AAPL: [EB|#CONFIG| 0] boot-save-log : 0x0000000000000002 (0x0000000000000002 < 0xFFFFFFFFFFFFFFFF) <default> 00:154 00:014 AAPL: [EB|#CONFIG| 1] wake-save-log : 0x0000000000000002 (0x0000000000000002 < 0x0000000000000002) <default> 00:181 00:026 AAPL: [EB|#CONFIG| 2] console : 0x0000000000000001 (0x0000000000000001 < 0x0000000000000001) <default> 00:196 00:015 AAPL: [EB|#CONFIG| 3] serial : 0x0000000000000000 (0x0000000000000000 < 0x0000000000000000) <default> 00:223 00:026 AAPL: [EB|#CONFIG| 4] embed-log-dt : 0x0000000000000000 (0x0000000000000000 < 0x0000000000000000) <default> 00:236 00:013 AAPL: [EB|#CONFIG| 5] timestamps : 0x0000000000000000 (0x0000000000000000 < 0xFFFFFFFFFFFFFFFF) <default> 00:252 00:015 AAPL: [EB|#CONFIG| 6] log-level : 0x0000000000000001 (0x0000000000000001 & 0x0000000000000001) <default> 00:267 00:015 AAPL: [EB|#CONFIG| 7] breakpoint : 0x0000000000000000 (0x0000000000000000 & 0x0000000000000000) <default> 00:282 00:015 AAPL: [EB|#CONFIG| 8] kc-read-size : 0x0000000000100000 (0x0000000000100000 < 0xFFFFFFFFFFFFFFFF) <default> 00:298 00:015 AAPL: [EB|#WL|0] 0x01 0x01 0 0x00 00:314 00:015 AAPL: [EB|#BRD:NV] Mac-AA95B1DDAB278B95 00:329 00:015 AAPL: [EB|#WL|1] 0x01 0x01 2 0x00 00:345 00:015 AAPL: [EB|`BST:IDT] { 00:362 00:016 AAPL: [EB|`BST:IDT] } 00:378 00:015 AAPL: [EB|#WL|2] 0x01 0x01 3 0x00 00:396 00:018 AAPL: [EB|#WL|3] 0x01 0x01 4 0x00 00:412 00:015 AAPL: [EB|#BRD:NV] Mac-AA95B1DDAB278B95 00:427 00:015 AAPL: [EB|#WL|4] 0x01 0x01 5 0x00 00:443 00:015 AAPL: [EB|`H:CHK] BM: 0x0000000000000000 00:459 00:015 AAPL: [EB|`H:CHK] Err(0xE) @ GV boot-signature 00:474 00:015 AAPL: [EB|#WL|5] 0x01 0x01 23 0x0E 00:489 00:015 AAPL: [EB|`H:CPM] Err(0xE), (24, 24) @ GV Persistent-memory-note 00:505 00:015 AAPL: [EB|#SB:P] 0x0 00:521 00:015 AAPL: [EB|#LIMG:DP] VenMedia(957932CC-7E8E-433B-8F41-D391EA3C10F8)/MemMap(10:100000000-100001000)/DMG_000000001DAD81D9.dmg/VenMedia(004B07E8-0B9C-427E-B0D4-A466E6E57A62)/HD(Part1,SigF48C3690-7290-40A1-958E-59C69F0CBD7C) 00:536 00:015 AAPL: [EB|#LIMG:FP] \System\Library\CoreServices\boot.efi 00:551 00:014 AAPL: [EB|#LIMG:OPT] () 00:569 00:017 AAPL: [EB|`B:OBV] BM: +DMG 00:584 00:014 AAPL: [EB|`B:OBV] BM: +ROS 00:603 00:019 AAPL: [EB|#RPS] R?0 P?0 S?0 00:623 00:019 AAPL: [EB|`OPT:LXF] 'LF (\\System\\Library\\CoreServices\\com.apple.Boot.plist) 00:638 00:015 AAPL: [EB|`LD:LF] FIO: 0, DIR: 1, P: \\System\\Library\\CoreServices\\com.apple.Boot.plist, DP: 0 00:653 00:015 AAPL: [EB|`LD:OFS] Err(0xE) @ OPEN (\\System\\Library\\CoreServices\\com.apple.Boot.plist) 00:669 00:015 AAPL: [EB|`OPT:LXF] Err(0xE) @ 'LF 00:684 00:015 AAPL: [EB|`OPT:LXF] 'LF (Library\\Preferences\\SystemConfiguration\\com.apple.Boot.plist) 00:699 00:015 AAPL: [EB|`LD:LF] FIO: 0, DIR: 1, P: Library\\Preferences\\SystemConfiguration\\com.apple.Boot.plist, DP: 0 00:730 00:030 AAPL: [EB:#KF] () 00:745 00:015 AAPL: [EB|#MBA:CL] () 00:763 00:018 AAPL: [EB|#MBA:NV] (-v keepsyms=1 debug=0x100 alcid=1 agdpmod=pikera shikigva=80 slide=255) 00:778 00:015 AAPL: [EB|#MBA:KF] () 00:794 00:015 AAPL: [EB|#MBA:OUT] (-v keepsyms=1 debug=0x100 alcid=1 agdpmod=pikera shikigva=80 slide=255) 00:809 00:015 AAPL: [EB|#LOG:VERBOSE] 2021-06-23T16:26:41 00:824 00:015 AAPL: [EB|`CSR:S] csr-active-config = 0x00000067 00:840 00:015 AAPL: [EB|#OPT:BM] 0x825082 00:855 00:015 AAPL: [EB|`OPT:LXF] 'LF (\\System\\Library\\CoreServices\\PlatformSupport.plist) 00:870 00:015 AAPL: [EB|`LD:LF] FIO: 0, DIR: 1, P: \\System\\Library\\CoreServices\\PlatformSupport.plist, DP: 0 00:905 00:035 AAPL: [EB|#B:VAw] 00:920 00:015 AAPL: [EB|`B:MN] BM: ROS 00:939 00:018 AAPL: [EB|#WL|6] 0x01 0x01 19 0x0E 00:954 00:015 AAPL: [EB|`CS:CSKSD] { 00:970 00:015 AAPL: [EB|`G:CS] } Ok(0) 00:989 00:018 AAPL: [EB|`LD:LF] FIO: 0, DIR: 1, P: <null string>, DP: 1 01:013 00:024 AAPL: [EB|`B:SBS] SZ: 617016 01:035 00:021 AAPL: [EB|#B:SHA] 103ea7708e088c76d181d2ec1cc2e188f42c5b53 01:053 00:018 AAPL: [EB|`WL:PWLFNV] Err(0xE) @ GV wake-failure 01:070 00:017 AAPL: [EB|`WL:DT] Err(0xE) @ WL:PWLFNV 01:087 00:017 AAPL: [EB|`WL:PWLFRTC] ! @ RTC:R 01:105 00:017 AAPL: [EB|`WL:DT] Err(0xE) @ WL:PWLFRTC 01:125 00:019 AAPL: [EB|`LD:LKC] BM:R -> (System\Library\PrelinkedKernels\prelinkedkernel) 03:868 02:743 AAPL: [EB|`LD:LKFS] } Ok(0) 03:896 00:027 AAPL: [EB|`LD:LKC] } Ok(0) 03:914 00:017 AAPL: [EB|#FWFM] 0xFFDFFF7F 03:930 00:016 AAPL: [EB|#FWFT] 0xFD8FF576 03:947 00:017 AAPL: [EB|#CSR:OUT] 0x00000067 03:969 00:021 AAPL: [EB|`BST:FBS] { 03:986 00:017 AAPL: [EB|`BST:FBS] BA.ADSZ: 0 04:003 00:017 AAPL: [EB|`BST:FBS] BA.KSDSZ: 0 04:023 00:019 AAPL: [EB|`B:WFDW] Err(0xE), 0 @ LocHB 71B4903C-14EC-42C4-BDC6-CE1449930E49 04:041 00:017 AAPL: [EB|#LOG:DT] 2021-06-23T16:26:44 04:059 00:018 AAPL: [EB|#LOG:EXITBS:START] 2021-06-23T16:26:44 Edit: Deleted EFi for safety. Edited June 26, 2021 by selphy Quote Link to comment https://www.insanelymac.com/forum/topic/348157-changing-clover-to-oc-070/ Share on other sites More sharing options...
Guest 5T33Z0 Posted June 24, 2021 Share Posted June 24, 2021 (edited) Reorder your kexts because almost every other kext relies on Lilu and VirtualSMC beeing loaded prior. 1. Lilu 2. VirtualSMC 3. WhateverGreen Rest… Then see what changes Edited June 24, 2021 by 5T33Z0 Quote Link to comment https://www.insanelymac.com/forum/topic/348157-changing-clover-to-oc-070/#findComment-2761529 Share on other sites More sharing options...
NoFnClue Posted June 24, 2021 Share Posted June 24, 2021 (edited) Second what @5T33Z0 said. Right now, you've got your IntelMausi.kext listed first in your plist. First should be Lilu. You can use Proper Tree to make a snapshot of your EFI folder, that will put you kexts in the correct order in you plist. Read through the guide here. It can be a bit overwhelming and intimidating when switching from Clover to OC, but totally worth it. Also, if you haven't already, follow this. Clover leaves some files behind that don't get along with OC. Edited June 24, 2021 by NoFnClue 1 Quote Link to comment https://www.insanelymac.com/forum/topic/348157-changing-clover-to-oc-070/#findComment-2761534 Share on other sites More sharing options...
selphy Posted June 24, 2021 Author Share Posted June 24, 2021 (edited) Thank you, I know about prior in kext, but it's doesn't work I don't know why. Even I started create new EFI, but it's the same. I can change manually positions of kexts. I set 1. Lilu 2. VirtualSMC 3. WhateverGreen 4. InteliMausi 5. NVMeFix 6. USBPort 7. AppleALC One thing changed, now even turn second monitor doesn't help with moving forward. Nothing changed. But still I needed to set it manually. Something must be wrong. Edited June 24, 2021 by selphy Quote Link to comment https://www.insanelymac.com/forum/topic/348157-changing-clover-to-oc-070/#findComment-2761538 Share on other sites More sharing options...
NoFnClue Posted June 24, 2021 Share Posted June 24, 2021 (edited) Disregard, I didn't see your last edit. Share your config please. Edited June 24, 2021 by NoFnClue Quote Link to comment https://www.insanelymac.com/forum/topic/348157-changing-clover-to-oc-070/#findComment-2761547 Share on other sites More sharing options...
selphy Posted June 24, 2021 Author Share Posted June 24, 2021 (edited) I even downloaded other EFI, from here. Situation is the same with ProperTree. Original file is fine, but when I did snapchat then inteliMausi is first in kext again... Edited June 26, 2021 by selphy Quote Link to comment https://www.insanelymac.com/forum/topic/348157-changing-clover-to-oc-070/#findComment-2761548 Share on other sites More sharing options...
Guest 5T33Z0 Posted June 25, 2021 Share Posted June 25, 2021 (edited) 1. Update ProperTree to the latest Version: https://github.com/corpnewt/ProperTree and built the app using one of the scripts included 2. Only use ProperTree for creating snapshots, not for editing 3. For editing the config.plist use this instead: https://github.com/ic005k/PlistEDPlus Edited June 25, 2021 by 5T33Z0 Quote Link to comment https://www.insanelymac.com/forum/topic/348157-changing-clover-to-oc-070/#findComment-2761558 Share on other sites More sharing options...
pablotill Posted June 25, 2021 Share Posted June 25, 2021 Use propertree and dortania guide. Easiest and cleaner way to do. Quote Link to comment https://www.insanelymac.com/forum/topic/348157-changing-clover-to-oc-070/#findComment-2761561 Share on other sites More sharing options...
NoFnClue Posted June 25, 2021 Share Posted June 25, 2021 6 hours ago, 5T33Z0 said: For editing the config.plist use this instead: https://github.com/ic005k/PlistEDPlus I didn't know about this editor, thanks for sharing! @selphy the last config you shard had Lilu, VirtualSMC, and WEG first. Should be good. But you may be better off starting from scratch following the guide on Dortania rather than another persons build. As much of a pain as that may be, you're less likely to run into issues because your creating it specifically for your system rather than trying to find what parts of someone else's build needs to be changed. Quote Link to comment https://www.insanelymac.com/forum/topic/348157-changing-clover-to-oc-070/#findComment-2761574 Share on other sites More sharing options...
selphy Posted June 25, 2021 Author Share Posted June 25, 2021 I used Dortania, I'll try again maybe slowly that time Thank you for helping. More information soon. Quote Link to comment https://www.insanelymac.com/forum/topic/348157-changing-clover-to-oc-070/#findComment-2761581 Share on other sites More sharing options...
Guest 5T33Z0 Posted June 25, 2021 Share Posted June 25, 2021 (edited) @selphy Use OC Gen X to automatically create an EFI vor your Coffe lake CPU, add your kexts and .aml files, create a snapshot and try booting with it from a FAT32 formatted USB Stick to get you started. Edited June 25, 2021 by 5T33Z0 Quote Link to comment https://www.insanelymac.com/forum/topic/348157-changing-clover-to-oc-070/#findComment-2761588 Share on other sites More sharing options...
pablotill Posted June 25, 2021 Share Posted June 25, 2021 4 hours ago, selphy said: I used Dortania, I'll try again maybe slowly that time Thank you for helping. More information soon. I was reading your log and seems you had a wrong smbios numbers, wake up (energy)? and boot image maybe is in wrong place the dmg? Take your time with dortania guide. 1 Quote Link to comment https://www.insanelymac.com/forum/topic/348157-changing-clover-to-oc-070/#findComment-2761591 Share on other sites More sharing options...
selphy Posted June 26, 2021 Author Share Posted June 26, 2021 (edited) 14 hours ago, 5T33Z0 said: @selphy Use OC Gen X to automatically create an EFI vor your Coffe lake CPU, add your kexts and .aml files, create a snapshot and try booting with it from a FAT32 formatted USB Stick to get you started. I used OC Gen X, it was the fastest way. Working ! Thank you. I have one question, in Clover was the same. After choose macOS status bar is loading, then screen is black I got information on monitor DisplayPort No Signal and then I can login in for system. I would like to change for smootly loading. Edited June 26, 2021 by selphy Quote Link to comment https://www.insanelymac.com/forum/topic/348157-changing-clover-to-oc-070/#findComment-2761603 Share on other sites More sharing options...
Guest 5T33Z0 Posted June 26, 2021 Share Posted June 26, 2021 @selphy Check the Framebuffer-Patch settings, maybe: https://dortania.github.io/OpenCore-Install-Guide/config.plist/coffee-lake.html#add-2 Quote Link to comment https://www.insanelymac.com/forum/topic/348157-changing-clover-to-oc-070/#findComment-2761627 Share on other sites More sharing options...
selphy Posted June 26, 2021 Author Share Posted June 26, 2021 (edited) I tried, but "framebuffers(where the dGPU is the display out) do not need" It's only just for sec. https://photos.app.goo.gl/fSvxFCthgMo5bUxR7 Edited June 26, 2021 by selphy Quote Link to comment https://www.insanelymac.com/forum/topic/348157-changing-clover-to-oc-070/#findComment-2761646 Share on other sites More sharing options...
Guest 5T33Z0 Posted June 26, 2021 Share Posted June 26, 2021 That's normal. Quote Link to comment https://www.insanelymac.com/forum/topic/348157-changing-clover-to-oc-070/#findComment-2761648 Share on other sites More sharing options...
selphy Posted June 27, 2021 Author Share Posted June 27, 2021 Ok, thank you guys for help, I really appreciate OC working. Quote Link to comment https://www.insanelymac.com/forum/topic/348157-changing-clover-to-oc-070/#findComment-2761679 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.