Jump to content
Sign in to follow this  
Followers 0
josebv98

HP ivy bridge laptop

2 posts in this topic

Recommended Posts

So, ive trying to install various versions of macOSs to an old hp laptop.

Specs: intel i7 3610qm, 8gb ram, nvidia 650m, intel HD4000

model: hp dv6

 

3 ago i did managed to install Niresh yosemite, even bought the right wifi adapter so i could use it on campus, but even then, i had to set cpus=1

 

Now, ive tried several guides, tried internet vanilla install guide (which ive done successfully in 2 devices), opencore guide, opencore laptop guide

 

Im currently having some financial problems, so i want sell my macbook to pay student loans, i really want to daily drive this laptop in mac os, but i cant get to boot the installer.

 

Anyone here have a similiar laptop? so i could borrow the efi folder, just to get it to install, then ill change stuff

 

Share this post


Link to post
Share on other sites
Advertisement
Posted (edited)

No support for distros here. You'll have to proceed with a full vanilla installation.

 

Ivy Bridge laptops fully support recent macOz versions such as Mojave and Catalina. Yosemite is old and obsolete.

nVidia 650m is Kepler (and Kepler are natively supported in Mojave/Catalina)  but you're unlikely to be able to run on that rather than HD4000 iGPU given that Optimus is not supported on Hackintosh.

HP laptops typically require Lapic patch to avoid KP at boot time; temporary workaround is booting with option cpus=1 (at the cost of performance). Since you've had to use that, make sure to apply the Lapic patch in your bootloader config.

Catalina requires Embedded Controller to be renamed to "EC" if it differs from that (you can look that up).

Use Clover r5107 minimum for Catalina as well as latest Lilu + WEG + AppleALC.

 

Follow the general guidance provided in Ivy Bridge laptop guides. Search for existing guides for your model. No reason why you would not get there. But just without distros...

Edited by Hervé

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
Followers 0

  • Recently Browsing   0 members

    No registered users viewing this page.

Announcements

  • Similar Content

    • By Raffay1234
      I'm transitioning from Clover to Opencore. I thought the process will be simpler but it turns out it isn't. I have created a bootable Catalina USB with Opencore but stuck at this error. I have attached my EFI and the verbose output. Anyone please provide some guidance please?
       
      The laptop is HP Pavilion 15 Gaming:
      Intel Core i7-9750H
      16GB RAM
      256GB SSD + 1TB SSD
      PS2 Keyboard + I2C Trackpad
       

      EFI.zip
    • By CaccapoKissima
      Hi, I wanted to transpose my CLOVER installation to OpenCore for future updates.
       
      I followed this guide and after some googling
      https://github.com/dortania/vanilla-laptop-guide
      I've fixed the LOG: EXITBS error (RANDOM SEED like error).
      Now I still receiving the IOPCI error (kernel_task kernel panic). 
       
      My CLOVER is fully working.
      - Backlight and Monitor
      - Trackpad
      - i7-7700HQ
      - Battery Patch
      - Camera and Audio (B&O)
      - Keyboard
      - dGPU GTX 1050 is turned off
       
      On OpenCore I translated everything except the battery (I just need to apply the If statement in ACPI), but I want first to boot on Mac OS using the OpenCore.
       
      HP Pavilion Power 15 
       
       
      config.plist

    • By tonyx86
      **********************************************************************************
      In this thread, I have fully documented the installation of macOS Catalina on my HP EliteDesk 800 G4 Mini. It is a PERFECT HackMini8,1 and is running very well for me without any issues. I hope this documentation helps you to install macOS on your hack. Please leave feedback if you think there is anything I can improve and let me know if you have any questions.
      **********************************************************************************
       
      Background
      This is my first "modern" hack supporting UEFI and my first hack using Clover "on-the-fly" patches.  My previous hacks
      Laptop: Thinkpad T61 / Nvidia NVS 140m Laptop: Dell Latitude E6410 / Nvidia G3100m Desktop: Gigabyte G31 / GeForce 9600 Desktop: Biostar TH55HD / Sapphire Pulse RX580 (Google "Catalina Biostar TH55HD" and look for user name deeveedee)  
      are all perfectly running Catalina and I patched them all "manually" - all DSDT patches applied with MaciSL with virtually no Clover on-the-fly patching and all booted Legacy Clover.  This UEFI hack was MUCH easier and took about 20 hours vs. a combined hundreds of hours for the old hacks.  I wanted a hack that was a little more future proof and I think this is it.  I hope you enjoy this as much as I am enjoying it.  It is a perfect MacMini8,1.
       

       
      My system specs
      HP EliteDesk 800 G4 Mini (I7-8700T / UHD 630 / Q370 Chipset / 32GB DDR4 RAM) 3 x DP Ports (connected to monitors using DP -> DVI adapters) 6 x USB 3.1 1 x USB Type-C 3.1 2 x NVMe SSD (M.2 PCIe x4 2280/2230 combo ports) 1 x SATA6 SSD 1 x Intel Ethernet RJ-45 Conexant CX20632 Audio Codec Unsupported M.2 PCIe x1 2230 Intel Wi-Fi (currently disabled in BIOS).  I may replace this with Brcm, but am using only Ethernet (IntelMausi) for now.  
      macOS Installation
      See macOS installation steps here See Known Issues here for additional installation steps that may not yet be included in my attached config files See CLOVER (UEFI) installation later in this first post
      See BIOS configuration in attached BIOS configuration PDF document
      See EFI and /L/E kexts in attached EliteDesk.zip archive See how I developed my installation methodology here See references here See instructions here for installing two M.2 2280 NVMe SSDs and one SATA HD / SSD  
      What is not working
      Wi-Fi / Bluetooth (intentional since I have not yet replaced my Intel card).  
      What is not tested
      USB c 3.1 port (I have partially tested the USB 3 functionality of the port and it seems to be working fine with the SSDT-UIAC.aml here) Microphone port  
      What is working
      Everything not mentioned above Sleep / Wake Multiple displays with IGPU graphics acceleration, hot pluggable display ports and DP->DVI adapters USB 3.1 ports Audio (internal speaker and headphone jack) Ethernet Auto-sensing headphone jack automatically switches to internal speaker when headphones removed  
      Known Issues and their solutions - see here
       
      BIOS Version / Configuration
      Version: 02.11.01 Rev.A See attached BIOS configuration in PDF document "HP EliteDesk 800 G4 Mini BIOS Configuration.pdf" Intel ME must be enabled for proper sleep / wake of UHD 630
       
      Clover Configuration
      Clover for UEFI booting only Install Clover in the ESP UEFI Drivers Recommended drivers DataHubDxe FSInject SMCHelper File System drivers ApfsDriverLoader VBoxHfs Memory fix drivers AptioMemoryFix Additional drivers NvmExpressDxe Install RC scripts on target volume Themes Choose your desired theme Install Clover Preference Pane (option not available when installing on USB thumb drive)  
      UHD 630 Framebuffer Patching
      See here and here  
      Current Versions
      Catalina 10.15.5.02 Clover (UEFI) r5119 Lilu.kext 1.4.5 WhateverGreen.kext 1.4.0 AppleALC.kext 1.5.0 IntelMausi 1.0.3 (Not IntelMausiEthernet)  
      Credits To be provided
       
      ScreenShots
       
       
      HP EliteDesk 800 G4 Mini BIOS Configuration.pdf
      EliteDesk800 G4 Mini - Rev 0.91.zip
    • By Fantome1S
      Finaly Success to boot on Sierra 10.12.6 (16G29) with Touchscreen working theres still things to fix but everything is almost working. During the Corvid StayAtHome Period I was able and have time to make this laptop boot on MacOS after a lot of attemps before going back to job. It was the hardest laptop hackintosh install attemp i've done so far and Sierra OS is the only that works. I tried El Capitan and Mojave and its never boot so I not even tested Catalina. I searched on the web and theres no install guide for this specific laptop or no Success install post on this laptop its look like a not very well supported laptop by hackintosh. Maybe some of you can help me correct the things that still not work. Audio work but with voodo (low sound and low quality) I want to make it work with AppleALC to get better quality sound. Thanks in advance
       
      Things that work:
       
      -Touchscreen
      -Trackpad (not the gesture for now) - Backlight Keyboard
      -EthernetPort and Wireless (with a wifi dongle. I will change to a broadcom wifi mini-pci chip)
      -Brightness Controls with FN key
      -Audio Voodoo ''low sound'' (will tried to change to AppleALC or AppleHDA fix method) 
      -USB 3.0
       
      Things that not work or need to be fixed:
       
      -Weird double long booting screen-first loading bar on the right. after real loading bar is visible ?
      -Audio (Voodoo) work but with low volume sound- still not success to make work AppleALC.kext method
      -SENSORS -CPU-HDD Temperatures, BATTERY LEVEL, ETC…
      - Sleep (Disabled): USB ports not works after wake from sleep
      -Trackpad Gestures
       
      Hardware:
       
      CPU: Intel Core i7-3687U, 2100 MHz
      GPU: Intel HD Graphics 4000
      RAM: 12 GB (4GB soldered + 8 GB Samsung DDR3 1600)
      Motherboard/Laptop model: Intel Panther Point QM77, Intel Ivy Bridge - (HP Revolve 810 G1)
      Audio Codec: IDT 92HD91BXX @ Intel Panther Point PCH - High Definition Audio Controller
      Ethernet Card: Intel(R) 82579LM Gigabit Network Connection
      Wifi/BT Card: Intel(R) Centrino(R) Advanced-N 6235
      HP hs2350 HSPA+ MobileBroadband Network Adapter
×