Asus TUF Z390M PRO GAMING Don't Install or Boot MacOS

[MorenoAv]

I have recently bought a new motherboard to change my Gigabyte, and I choose the Asus in the title, as soon as it arrived I mounted it and installed windows 10 and it works really well the problem started the I tried to first boot an working ssd with macOS Catalina with clover and following various guides that use the same motherboard and that work, it didn't boot obviously. Then I made a new usb installer first with clover and it didn't complete the install in the final reboot it boots to the pole logo and an empty loading bar and stays there until I shut ir down. After that I successfully  made an usb installer with OpenCore 0.5.7 and tried to install macOS Catalina again and nothing it boots and in the first reboot, boots to an black screen and stays there until I shut it down. After that I initiate contact with the support service from ASUS, it take 2 days until they contacted me, saying that this particular motherboard only works with windows. 

That answer didn't please me and I contacted them again telling the true that I had made my research before buying this motherboard and sending them pictures of the settings needed for it working successfully.

Today  I received another answer from ASUS telling me that they didn't support other OS in that motherboard and lamenting that fact.

 

I beg forgiveness for the long post and for the rant, but I need your help to make it work or I have to sell the motherboard, but it didn't please me because so many have succeeded why not me?

Thanks for your help

 

This are the settings that I used:

 

 

BIOS:
Ai Tweaker:

• Ai Overclock Tuner: XMP I (just for speed)
• ASUS MultiCore Enhancement: Auto

Advanced:

• Platform Misc Configuration (lower temperature of Radeon):
  • PCI Express Native Power Management: Enabled
  • Native ASPM: Enabled
  • PCH DMI ASPM: Auto
  • ASPM: Auto
  • L1 Substates: L1.1 & L1.2
  • PEG - ASPM: Auto
• CPU Configuration:
  • Intel (VMX) Virtualization Technology: Enabled
  • Hyper-Threading: Enabled
  • CPU-Power Management Control:
    • Intel SpeedStep: Enabled
    • Intel Speed Shift: Enabled
    • CFG Lock: Disabled
• System Agent (SA) Configuration
  • VT-d: Disabled
  • Above 4G Decoding: Disabled
  • Graphics Configuration (Radeon rx580 GPU + Intel HD 630 iGPU hardware acceleration):
    • Primary Display: PCIE
    • iGPU Multi-Monitor: Enabled
    • DVMT Pre-Allocated: 32M
    • RC6(Render Standby): Disabled
• PCH Configuration
  • IOAPIC 24-119 Entries: Enabled
• PCH Storage Configuration
  • SATA Controller(s): Disabled (if you have SDD NVMe)
• Onboard Devices Configuration
  • HD Audio: Disabled (there is no drivers for S1200A)
  • Serial Port Configuration
    • Serial Port: Off
• USB Configuration
  • Legacy USB Support: Enabled
  • XHCI Hand-off: Enabled
• Network Stack Configuration
  • Network Stack: Disabled

Boot:

• Boot Configuration
  • Fast Boot: Disabled
• CSM (Compatibility Support Module)
  • Launch CSM: Disabled
• Secure Boot
  • OS Type: Windows 10 WHQL
  • Key Management: do Clear Secure Boot Keys

 

Edited April 30, 2020 by MorenoAv