Jump to content
ShiroOne

HELP - GA-z370n-WIFI i7-8700k UHD 630 Panic Error

7 posts in this topic

Recommended Posts

Hi! Newbie here.

 

Been browsing the forums for a while and trying to setup a Mojave 10.14.3 with the following hardware:

  • Motherboard: ga-z370n-wifi - BIOS revision F5
  • CPU: Intel i7-8700k 
  • RAM: G.Skillz Trident Z 32gb (2x 16gb) DDR4-3000
  • HDD: Samsung 860 Evo M.2 1 TB 
  • PSU: Corsair RX750

 

USB used is 2.0

 

I've run into an issue where I'm trying to load the installer, but I am getting a panic error before getting to the Grey install screen.

Followed this guide:

 

See attached Screenshot for kernel panic.

 

If I need to provide more info, let me know and I'll do my best to provide the info :)

 

 

Also i'm not sure how to get the panic logs since I don't get shell unless I boot into single-user mode. (That of which I noticed a panic error whenever I try to run diskutil from single user mode)

IMG_20190201_230345.jpg

Share this post


Link to post
Share on other sites
Advertisement
21 hours ago, Yowie said:

With Clover installer i had no issues starting when i replaced the Config.plist for Coffeelake from this website.

https://github.com/corpnewt/Hackintosh-Guide/tree/master/Configs 

I used this Youtube as a guide.

https://www.youtube.com/watch?v=fA9AotXqkqA

That was on a GA-Z370m-D3H its been running a couple of weeks now ..

 

 

I followed the video exactly and i still came up with the above error.

Do you think it makes a difference if it booted from panic?

Share this post


Link to post
Share on other sites

I don't believe it would make any difference.

 

I noticed for a system model Mac Mini 8,1 has been selected have . you tried to select something else?

 

This is mine you just select from the dropdown in Clover.

 

 

 

 

 

490913084_ScreenShot2019-02-04at6_13_28pm.thumb.png.45b19278fc4e7fe2c356ccac40f40ca4.png

Share this post


Link to post
Share on other sites
On 2/4/2019 at 2:23 AM, Yowie said:

I don't believe it would make any difference.

 

I noticed for a system model Mac Mini 8,1 has been selected have . you tried to select something else?

 

This is mine you just select from the dropdown in Clover.

 

Thanks. What hardware to you have? the same?
I tried iMac 18,1. I can try a different one.

Do i need to clear the Serial # and Serial UUID or leave them auto-generated?

 

So i had tried installing windows 7 on the computer, but it seems that I can reach the install screen, but the usb keyboard suddenly stops working. All my USB ports are 3.0 and i don't have any 2.0 ones. I tired both wireless and wired keyboard.

 

Share this post


Link to post
Share on other sites
On 2/7/2019 at 1:25 AM, ShiroOne said:

 

Thanks. What hardware to you have? the same?
I tried iMac 18,1. I can try a different one.

Do i need to clear the Serial # and Serial UUID or leave them auto-generated?

 

So i had tried installing windows 7 on the computer, but it seems that I can reach the install screen, but the usb keyboard suddenly stops working. All my USB ports are 3.0 and i don't have any 2.0 ones. I tired both wireless and wired keyboard.

 

I have a Gigabyte GA-Z370m-D3H Motherboard which is very similar it also only has USB3 & 3.1 ports and Intel i7 8700 .

I never reset the serials i just tried a couple of different Models until i found one the mostly every thing worked straight up, now the only issue i have is the sleep issue which seems to be common..

 

 

Share this post


Link to post
Share on other sites
On 2/8/2019 at 4:03 AM, Yowie said:

I have a Gigabyte GA-Z370m-D3H Motherboard which is very similar it also only has USB3 & 3.1 ports and Intel i7 8700 .

I never reset the serials i just tried a couple of different Models until i found one the mostly every thing worked straight up, now the only issue i have is the sleep issue which seems to be common..

 

So the odd thing is that i can't even boot to the installer. Can't seem to figure out what the issue might be. 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By ludufre
      Installing macOS Catalina 10.15.3 on Gigabyte Z370N WIFI + i7 8700K + UHD 630



      Changelog:
       
      01/30/2020 23:54h GMT-0
      - Update instructions 10.15.3.
       
      12/11/2019 03:58h GMT-0
      - Update instructions 10.15.2.
      - Updated EFI folder attached.
       
      11/30/2019 18:03h GMT-0
      - Changed Device -> Graphics platform to fix dual HDMI monitor.
      - Updated EFI folder and config.plist
       
      11/29/2019 21:28h GMT-0
      - Added full EFI folder as requested.
       
      11/27/2019 02:33h GMT-0
      - Added BIOS profiles for ease.
       
      11/25/2019 22:45h GMT-0
      - Fixed wrong ethernet link (IntelMausi.kext).
      - Thanks to @MiMoHo
       
      11/24/2019 04:56h GMT-0
      - First version.
       
      What works and what does not
       
      - Processor: Intel Core i7-8700K ->  Work. All SpeedStep stages.
      - Video Card: Intel UHD 630 ->  Work. QE/CI and Metal.
      - Chipset: Intel Z370 ->  Work.
      - HDMI 2.0 (1st) ->  Work.
      - HDMI (2nd) ->  Work.
      - DP ->  Work.
      - Audio: ALC1220 ->  Work.
      - HDMI Audio ->  Work.
      - WiFi/Bluetooth ->  Not work. Replaced with BCM94360CS2.
      - Ethernet (1st) ->  Work.
      - Ethernet (2nd) ->  Work.
      - USB3.0 ->  Work.
      - Sleep ->  Work.
      - Airdrop, Handoff, Instant Hotspot and Continuity ->  Work after replaced wireless.
       
       
      Todo
       
      - Empty
       
      What you need to install
       
      - Running install of macOS
      - One USB flash drive of 8GB or bigger
      - macOS Catalina install app
      - Clover EFI
      - Clover Configurator
      - Some KEXTs and SSDT patches


      How create create the install flash drive
       
      Prepare install flash drive

      Format the flash drive with GUID partition mapping and name it "Install".

      - Open Disk Utility.
      - Click in View, then "Show All Devices".
      - Select the destination flash drive, then Erase.
      - Name: Install, Format: Mac OS Extended (Journaled) and Scheme: GUID Partition Map
       
      Create install flash drive

      Open terminal and run this command:
      sudo /Applications/Install\ macOS\ Catalina.app/Contents/Resources/createinstallmedia --volume /Volumes/Install --nointeraction  This will take about 30 minutes.
       


      Install bootloader
       
      Download the CloverEFI from official repository (used 5099) and install only with these options on "Install macOS Catalina":
       
      - Install for UEFI booting only
      - Install Clover in the ESP
      - UEFI Drivers - Recommended Drivers - FSInject (I still don't know if it's really necessary)
      - UEFI Drivers - File System drivers - ApfsDriverLoader (Support to APFS partitions)
      - UEFI Drivers - File System drivers - VBoxHfs (Support HFS/HFS+ partitions)
      - UEFI Drivers - Memory fix drivers - AptioMemoryFix (Fix the memory management of de UEFI/BIOS)
      - UEFI Drivers - Additional drivers - NvmExpressDxe (If you are going to use NVMe)
       
      FileVault 2
       
      If you plan to use FileVault 2, you need to download additional drivers, since what comes with Clover is not up to date and use VirtualSMC instead of FakeSMC.
      Follow instructions bellow:
       
      From current Clover installation, check these options to USB keyboard/mouse work on password screen:
      - UEFI Drivers - Human Interface Devices - UsbKbDxe
      - UEFI Drivers - Human Interface Devices - UsbMouseDxe
       
      After Clover install will be created a partition named EFI and mounted in Desktop. Usually the path is /Volumes/EFI/.
       
      Download the versions 2.1.0 and 2.0.9 of AppleSupportPkg from: https://github.com/acidanthera/AppleSupportPkg/releases
      We need the last version of AppleGenericInput.efi that is inside 2.1.0 and last version of AppleUiSupport.efi that is inside 2.0.9.
      OR download attached bellow.
       
      Put in /Volumes/EFI/EFI/CLOVER/drivers/UEFI/
       
      That's it! FileVault 2 will work without problems.
       

       
       
       
      Make things works
       
      After Clover install will be created a partition named EFI and mounted in Desktop. Usually the path is /Volumes/EFI/.
       
      - Replace the /Volumes/EFI/EFI/CLOVER/config.plist with mine attached below according to your processor version.
      - Put all SSDT-*.aml attached below in /Volumes/EFI/EFI/CLOVER/ACPI/patched/
       
      Generate your Serial, MLB and SmUUID
       
      - Open the replaced config.plist with Clover Configurator (used 5.8.0.0)
      - Go to SMBIOS, click few times in "Generate New" in Serial Number and SmUUID.
       
      Copy the Clover Configurator to flash drive because you will need later.
       
      Download those Kexts and put in /Volumes/EFI/EFI/CLOVER/kexts/Other/
       
      - Download the VirtualSMC.kext, SMCProcessor.kext, SMCSuperIO.kext and UEFI driver (put VirutalSmc.efi inside /Volumes/EFI/EFI/drivers/UEFI/). I used the version 1.0.9.
      - Download the Lilu.kext from here. I used the version 1.3.9.
      - Download the WhateverGreen.kext from here. I used the version 1.3.4.
      - Download the AppleALC.kext from here. I used the version 1.4.3.
      - Download the USBInjectAll.kext from here. I used the version 2018-1108.
      - Download the IntelMausi.kext from here. I used the version 1.0.2.
      - Download the SmallTree-Intel-211-AT-PCIe-GBE.kext attached bellow to enable second ethernet.
       
      Important! If you are coming from my previous Mojave guide, please note that I am using some kexts from other repositories / authors.
       
      Wifi and Bluetooth (BCM94360CS)
       
      Works out of box (plug 'n' play).
       
       
      Now you can start the installation without problem (I guess).
       
       
      How install
       
      UEFI Setup Configuration and Installation

      UEFI configuration
       
      My BIOS is F10 (I use an 8th generation processor, so I don't need to upgrade)
       
      You can configure manually or load my BIOS profile.
       
      Manually:
      - Shutdown and insert the flash.
      - Power on with DEL pressed to enter BIOS setup.
      - Change value: BIOS - CSM Support to Disabled
      - Change value: BIOS - Secure Boot to Disabled
      - Change value: Peripherals - Initial Display to IGP
      - Change value: Chipset - VT-d to DISABLE
      - Change value: Chipset - Internal Graphics to ENABLE
      - Save & Exit Setup
       
      or, BIOS profile
      You can use one of my BIOS profiles attached bellow.
      It's two versions. One stock (Geekbench 4: 5840/27384) and another with overclock [5.0 GHz] (Geekbench 4: 6360/30348)
      - Put the profile in the root of the flash drive at EFI partition.
      - Restart with DEL pressed to enter BIOS setup.
      - Go to Save & Exit.
      - Select Load Profiles.
      - Select last option and then the flasdrive in the list.
      - And finally choose MACOS_STOCK or MACOS_5GHZ.
      - Save & Exit Setup
       
      Then:
      - Now, hold the F12
      - In the list, select your flash drive.
      - Choose the flash drive (white icon).
       
      The installer will start. 
      
      Format destination disk

      Format the disk with GUID partition mapping and name it "Macintosh".

      - Select Disk Utility in the list, then press Continue.
      - Click in View, then "Show All Devices".
      - Select the destination Disk, then Erase.
      - Name: HD, Format: APFS and Scheme: GUID Partition Map

      Close Disk Utility.
      
      Select "Install macOS", then Continue.
      Follow instructions in screen.

      After install

      After first part install the system will reboot. Maybe you have to press ESC again and select the flash drive.
       
      Choose the internal disk (gray hdd icon) if not already selected.

      The second part of the installation will begin. This will take 16 minutes.

       
      Post installation
       
      Bootloader

      When the second part of install finish, the system will reboot again.

      After performing the user initial setup and go to the desktop, you need to make the system disk bootable.

      Open the Clover Configurator from flash drive that you copied before.

      Mount and open the flash drive EFI partition. (Inside Clover Configurator, Mount EFI -> Select flash drive in Efi Partitions list -> Mount Partition -> Open Partition)
       
      Copy the EFI folder to desktop.
       
      Go back to Clover Configurator, unmount the EFI partition of the flash drive and mount and open the EFI partition of internal disk.
       
      Move the EFI folder from Desktop to EFI partition of the internal disk.
       
      Eject the flash drive.
       
      Move all Kexts from EFI partition of internal disk to /Library/Extensions and make kext cache, with those commands in Terminal:
      sudo mv -R /Volumes/EFI/EFI/CLOVER/kexts/10.15/* /Library/Extensions/ sudo chmod -R 755 /Library/Extensions sudo chown -R root:wheel /Library/Extensions sudo kextcache -i / Restart the system.
       
      Last thing
       
      Run this command in Terminal to disable hibernation (doesn't work in macOS):
      sudo pmset -a hibernatemode 0  
       
      It's done!
       
       
      System Updates
       
      10.15.2
       
      Before install, update the following kexts:
      - Lilu.kext. I used version 1.4.0.
      - WhateverGreen.kext. I used version 1.3.5.
      - AppleALC.kext. I used version 1.4.4.
      (all download links above)
       
      Download the latest CLOVERX64.efi.zip build. I used version 5100.
      Mount EFI partition and unzip to:
      - /Volumes/EFI/EFI/CLOVER/CLOVERX64.efi
      - /Volumes/EFI/EFI/BOOT/BOOTX64.efi (rename the copy of CLOVERX64.efi to BOOTX64.efi
       
      Install update. Will reboot at leats four time.
       
       
      10.15.3
       
      Updated with success without changing anything.
       
       

       
      And last but not least
       
      I would like to thank the following community members, by making these dream possible:
      @crushers, @snatch, @apianti, @blackosx, @blusseau, @dmazar, @slice2009, @autumnrain, @phpdev32, @EMlyDinEsH, @RehabMan, @Scellow, @mitch_de, @Shailua, @Andy Vandijck, @maxfierke, @ArturXXX, @LexHimself, @brumas and all others members involved directly or indirectly.
       
      Attachments
       
      config.plist v2.zip
      EFI v3.zip
      Filevault 2 additional drivers.zip
      SmallTree-Intel-211-AT-PCIe-GBE.kext.zip
      SSDTs.zip
      MACOS_5GHZ
      MACOS_STOCK
       
       
       
    • By ludufre
      New guide available for macOS Catalina 10.15!
       
       
      Installing macOS Mojave 10.14.6 on Gigabyte Z370N WIFI + i7 8700K + UHD 630



      Changelog:
       
      09/01/2019 15:57h GMT-0
      - Updated to 10.14.6.
       
      06/10/2019 00:44h GMT-0
      - Completely rewritten.
       
      10/17/2018 08:12h GMT-0
      - Fix Kexts permissions commands adjusted.
      - Removed FrameBuffer patch that is not needed.
      - Added audio solution and HDMI.
      - Unfortunately DisplayPort does not work.
      - Replaced Wifi/BT with DW1560 (BCM94352Z)
       
      10/11/2018 04:15h GMT-0
      - Added USB 3.0 patch.
      - Adjusted some steps.
      - Changed text formatting.
       
      10/11/2018 03:42h GMT-0
      - Added missing UEFI configuration.
       
      10/07/2018 00:36h GMT-0
      - First version.
       
      What works and what does not
       
      - Processor: Intel Core i7-8700K ->  Work. All SpeedStep stages.
      - Video Card: Intel UHD 630 ->  Work. QE/CI and Metal.
      - Chipset: Intel Z370 ->  Work.
      - HDMI 2.0 (1st) ->  Work.
      - HDMI (2nd) ->  Work.
      - DP ->  Not tested yet.
      - Audio: ALC1220 ->  Work.
      - HDMI Audio ->  Work.
      - WiFi/Bluetooth ->  Not work. Replaced with BCM94360CS2.
      - Ethernet (1st) ->  Work.
      - Ethernet (2nd) ->  Work.
      - USB3.0 ->  Work.
      - Sleep ->  Work.
      - Airdrop, Handoff, Instant Hotspot and Continuity ->  Work after replaced wireless.
       
       
      Todo
       
      - Make audio work.
      - Make HDMI audio work.
      - Test DisplayPort.
      - Make second ethernet work.
      - Replace Wifi/Bluetooth.
      - Test DP.
       
      What you need to install

      - Running install of macOS
      - One USB flash drive of 8GB or bigger
      - macOS Mojave install app
      - Clover Configurator
      - Clover EFI
      - Clover Configurator
      - Some KEXTs and SSDT patches


      How create create the install flash drive
       
      Prepare install flash drive

      Format the flash drive with GUID partition mapping and name it "Install".

      - Open Disk Utility.
      - Click in View, then "Show All Devices".
      - Select the destination flash drive, then Erase.
      - Name: Install, Format: Mac OS Extended (Journaled) and Scheme: GUID Partition Map
       
      Create install flash drive

      Open terminal and run this command:
      sudo /Applications/Install\ macOS\ Mojave.app/Contents/Resources/createinstallmedia --volume /Volumes/Install --nointeraction This will take about 30 minutes. / 8 minutes with USB 3.0
       
       

      Install bootloader

      Download the CloverEFI (used 5058, from Automated Clover Builds) and install with this options on "Install macOS Mojave":
       
      - Install for UEFI booting only
      - Install Clover in the ESP
      - UEFI Drivers - Recommended drivers (check all)
      - UEFI Drivers - Human Interface Devices (check all)
      - UEFI Drivers - FileVault 2 UEFI Drivers (check all, If you are going to use FileVault)
      - UEFI Drivers - Additional drivers - NvmExpressDxe (if you are going to use NVMe)


       
       
      Make things works
       
      We'll make a full working flash drive, so follow these instructions:
       
      Will be mounted the EFI partition of the flash drive.
       
      Open the the /Volumes/EFI/CLOVER/config.plist inside this new partition with Clover Configurator (used 5.5.0.0)
       
      Important modifications
       
      config.plist
       
      ACPI Page
       
      - Check: SSDT - PluginType
       
      BOOT Page
       
      - Add: Arguments - darkwake=2
      - Check: Legacy - XMPDetection=Yes
       
      KERNEL AND KEXT PATCHES Page
       
      - Check: KernelPm
       
      RT VARIABLES Page
       
      - Change: CsrActiveConfig - 0x3E7
       
      SMBIOS Page
       
      - Change: Macmini8,1 - Mac mini (Late 2018) | Intel Core i7-8700B @ 3.20 GHz

       
      - Click: Generate New (few times in the two buttons)

       
       
      Need some Kexts in the folder /EFI/CLOVER/kexts/Other/
       
      - Download the HWSensors 3 from here. I used the FakeSMC.kext, ACPIMonitor.kext, ITEIT87x.kext and IntelCPUMonitor.kext inside of DMG version r240.
      - Download the Lilu.kext from here. I used the version 1.3.8.

       
      Intel UHD 630
       
      ACPI Page
      - Uncheck: Fixes - AddHDMI
      - Uncheck: Fixes - FixDisplay
      - Uncheck: Fixes - FixHDA
       
      GUI Page
      - Change: Screen Resolution - 3840x2160 (My monitor is 4K)

      Need a Kext in the folder /EFI/CLOVER/kexts/Other/
       
      - Download the WhateverGreen.kext from here. I used the version 1.3.1.

       
      Audio ALC 1220 and HDMI audio

      BOOT Page
      - Add: Arguments - alcid=11

      DEVICES Page
      - Change: Audio - Inject - 11
      - Uncheck: Audio - AFGLowPowerState
      - Uncheck: Audio - ResetHDA

      Need a Kext in the folder /EFI/CLOVER/kexts/Other/
       
      - Download the AppleALC.kext from here. I used the version 1.4.0.

       
      All USBs (2.0, 3.0, Type-C, internal)
       
      KERNEL AND KEXT PATCHES Page - KextsToPatch
       
      - Name*: com.apple.iokit.IOUSBHostFamily
      - Find* [HEX]: 83FB0F0F
      - Replace* [HEX]: 83FB3F0F
      - Comment: USB Port Limit Patch 1 PMHeart/DalianSky
      - MatchOS: 10.14.x
       
      - Name*: com.apple.iokit.IOUSBHostFamily
      - Find* [HEX]: 83FB0F0F
      - Replace* [HEX]: 83FB3F0F
      - Comment: USB Port Limit Patch 2 PMHeart/DalianSky
      - MatchOS: 10.14.x
       
      - Name*: com.apple.driver.usb.AppleUSBXHCI
      - Find* [HEX]: 83FB0F0F
      - Replace* [HEX]: 83FB3F0F
      - Comment: USB Port Limit Patch 3 PMHeart/DalianSky
      - MatchOS: 10.14.x
       
      - Name*: com.apple.driver.usb.AppleUSBXHCI
      - Find* [HEX]: 83FF0F0F
      - Replace* [HEX]: 83FF3F0F
      - Comment: USB Port Limit Patch 4 PMHeart/DalianSky
      - MatchOS: 10.14.x
       
      Need a Kext in the folder /EFI/CLOVER/kexts/Other/
       
      - Download the USBInjectAll.kext from here. I used the version 2018-1108.
       
      Need SSDT patch in the folder /EFI/CLOVER/ACPI/patched/
       
      - Download the SSDT-EC.aml, SSDT-UIAC.aml and SSDT-USBX attached bellow.
       
      Wifi and Bluetooth (BCM94360CS)
       
      Works out of box (plug 'n' play).
       
       
      LAN Cards
       
      Need a Kext for feach card in the folder /EFI/CLOVER/kexts/Other/
       
      - Download the IntelMausiEthrenet.kext from here. I used the version 2018-1031.
      - Download the SmallTreeIntel82576.kext attached bellow. I do not remember where I found it.

       
      Now you can start the instalation without problem (I guess).
       
       
      How install
       
      UEFI Setup Configuration and Installation

      UEFI configuration
       
      - Shutdown and insert the flash.
      - Power on with DEL pressed to enter BIOS setup.
      - Change value: Periphelrals - Initial Display to IGP
      - Change value: Periphelrals - USB Configuration - XHCI Hand-off to ENABLE
      - Change value: Chipset - VT-d to DISABLE
      - Change value: Chipset - Internal Graphics to ENABLE
      - Change value: Chipset - DVMT Pre-Allocated to 128M
      - Save & Exit Setup
       
      - Now, hold the F12
      - In the list, select your flash drive.
      - It will show twice. One with UEFI prefix and another without.
      - Select with UEFI prefix. Ie.: "UEFI: Sandisk Cruzer"
       
      The installer will start. 
      
      Format destination disk

      Format the disk with GUID partition mapping and name it "HD".

      - Select Disk Utility in the list, then press Continue.
      - Click in View, then "Show All Devices".
      - Select the destination Disk, then Erase.
      - Name: HD, Format: APFS and Scheme: GUID Partition Map

      Close Disk Utility.
      
      Select "Install macOS", then Continue.
      Follow instructions in screen.

      After install

      After first part install the system will reboot.
      
      The second part of the installation will begin. This will take 16 minutes.
       

      Post installation

      Install bootloader
       
      When the second part of install finish, the system will reboot again.

      After performing the user initial setup and go to the desktop, you need to install Clover on internal disk.

      Open the Clover installer inside flash drive that you copied before.

      Use same options above but choose the system partition this time.

      Now you need to replace the EFI folder inside your destination disk EFI parittion, with EFI folder inside flash card EFI partition.

      If the flash drive EFI partition of your destination disk or flash drive is unmounted:
      Mount with terminal "sudo diskutil mount /dev/rdiskXs1". To know what X is, use "diskutil list", most likely is 0 for destination disk and 1 for flash drive.
       
      Then, eject the flash drive.
       
      Last step
       
      Move all Kexts from EFI partition to /Library/Extensions, with those commands in Terminal:
      sudo cp -R /Volumes/EFI/EFI/CLOVER/kexts/10.14/* /Library/Extensions/ sudo chmod -R 755 /Library/Extensions sudo chown -R root:wheel /Library/Extensions sudo kextcache -i / Restart the system.
       
       
      It's done!
       
       
      Updates
       
      System update 10.14.6
       
      - Download and open latest CloverConfigurator
      - Open Mount EFI and click in Mount Partition in EFI Partitions list
      - Click in Open Partition that appears
      - Go to EFI -> CLOVER
      - Backup config.plist and ACPI folder to desktop
      - Go back and delete CLOVER folder
      (If you restart now you can't boot in macOS - DON'T RESTART)
      - Download latest Clover and install (link and config above)
      - Replace config.plist and ACPI folder from your desktop
       
      - Update Lilu.kext, AppleALC.kext, WhateverGreen.kext, HWSensors kexts (FakeSMC, ACPIMonitor, IntelCPUMonitor, ITEIT87x) in /Library/Extensions/
      - Run:
       
      sudo chmod -R 755 /Library/Extensions sudo chown -R root:wheel /Library/Extensions sudo kextcache -i /  
       
      - Install macOS Update 10.14.6 and restart
       

       
      And last but not least
       
      I would like to thank the following community members, by making these dream possible:
      @crushers, @snatch, @apianti, @blackosx, @blusseau, @dmazar, @slice2009, @autumnrain, @phpdev32, @EMlyDinEsH, @RehabMan, @Scellow, @mitch_de, @Shailua, @Andy Vandijck, @maxfierke, @ArturXXX, @LexHimself, @brumas and all others members involved directly or indirectly.
       
       
       
      Z370N-WIFI v2.zip
    • By jdorz
      Hello all,

      I have successfully gotten my Hackintosh working 99 percent. The remaining issue that I am running into is that my system will randomly kernel panic upon a user issued shutdown or reboot WHEN I have either a usb sound card or usb headset plugged into any of my USB ports (both 2.0 and 3.0). If I remove the headset, it will power down with no issues. Does anyone have any suggestions?

      My system is as follows:
      MacOS 10.14 Mojave
      Gigabyte H370 HD3
      8400 i5 Coffee Lake
      Radeon RX 580 sound card

      Fixed
       
      Solution
       
      Use this folder for serie 100/200/300
      https://olarila.com/forum/viewtopic.php?f=28&t=8222
       
      reboot and extract one send_me for full dsdt patch by MaLd0n
      --Run_Me
      RunMe.app
       
       
       
    • By kelvin henrique
      Faz pouco menos de uma semana que estou tentando dar boot usando um pendrive no lenovo g40-80, mas todas as vezes que tento algum kernel panic diferente acontece, não entendo tanto de hackintosh mas pelo que li tanto aqui no forum quanto em outros sites me fizeram constatar que talvez o erro seja falta de kexts, alguem possui os kexts para esse notebook ??
       
      primeiro erro que tive era porque estava usando um pendrive de 8gb, o recomendado é 16 no minimo pelo oque vi, fui la, comprei um de 32, mudou o kernel panic mas era só um dos erros resolvidos.
       
      especificações dele:
      Processador: Intel Core i3-5005U
      Grafico: Intel HD Graphics 5500
      originalmente ele vinha com um hd de 500gb e 4gb de ram, mudei pra um ssd de 128gb e 8 gb de ram
       
      ja percebi que unico problema desse notebook é que a placa de wifi não vai funcionar, mas quanto a isso não tem problema pois se conseguir mesmo instalar o mac eu comprou outra
    • By snifferdog
      My Catalina build is running fine except for occasional kernel panics (maybe once or twice a day).  Mobo is Gigabyte Z390P D3, CPU is Core i5-8400, integrated graphics.  My config.plist is attached.
       
      Here is the report which is available when the system reboots.  One thought that occurs to me is to disable 'Put hard disks to sleep when possible' in System Preferences.  I am trying that now.  Thanks for any help.
       
      panic(cpu 1 caller 0xffffff8001e290b7): "AppleAHCIDiskQueueManager::setPowerState(0xffffff8026691d80 : 0xffffff7f8332a96c, 2 -> 3) timed out after 101265 ms"@/BuildRoot/Library/Caches/com.apple.xbs/Sources/xnu/xnu-6153.11.26/iokit/Kernel/IOServicePM.cpp:5302
      Backtrace (CPU 1), Frame : Return Address
      0xffffff920864bb40 : 0xffffff800173f98b mach_kernel : _handle_debugger_trap + 0x47b
      0xffffff920864bb90 : 0xffffff8001876c15 mach_kernel : _kdp_i386_trap + 0x155
      0xffffff920864bbd0 : 0xffffff800186861e mach_kernel : _kernel_trap + 0x4ee
      0xffffff920864bc20 : 0xffffff80016e6a40 mach_kernel : _return_from_trap + 0xe0
      0xffffff920864bc40 : 0xffffff800173f077 mach_kernel : _DebuggerTrapWithState + 0x17
      0xffffff920864bd40 : 0xffffff800173f45b mach_kernel : _panic_trap_to_debugger + 0x21b
      0xffffff920864bd90 : 0xffffff8001ed2d89 mach_kernel : _panic + 0x61
      0xffffff920864be00 : 0xffffff8001e290b7 mach_kernel : __ZN9IOService12ackTimerTickEv + 0x417
      0xffffff920864be50 : 0xffffff8001e28c79 mach_kernel : __ZN9IOService21actionAckTimerExpiredEP8OSObjectPvS2_S2_S2_ + 0x9
      0xffffff920864be60 : 0xffffff8001e4002e mach_kernel : __ZN10IOWorkLoop9runActionEPFiP8OSObjectPvS2_S2_S2_ES1_S2_S2_S2_S2_ + 0x3e
      0xffffff920864bea0 : 0xffffff8001e27a28 mach_kernel : __ZN9IOService17ack_timer_expiredEPvS0_ + 0x38
      0xffffff920864bec0 : 0xffffff80017811d5 mach_kernel : _thread_call_delayed_timer + 0xea5
      0xffffff920864bf40 : 0xffffff8001780d01 mach_kernel : _thread_call_delayed_timer + 0x9d1
      0xffffff920864bfa0 : 0xffffff80016e613e mach_kernel : _call_continuation + 0x2e
      BSD process name corresponding to current thread: kernel_task
      Boot args: -v darkwake=0 dart=0 debug=0x100 keepsyms=1 kext-dev-mode=1 -disablegfxfirmware -no_compat_check 
      Mac OS version:
      19A583
      Kernel version:
      Darwin Kernel Version 19.0.0: Wed Sep 25 20:18:50 PDT 2019; root:xnu-6153.11.26~2/RELEASE_X86_64
      Kernel UUID: 70EDD61F-86EE-3E1B-873F-98D909B78160
      Kernel slide:     0x0000000001400000
      Kernel text base: 0xffffff8001600000
      __HIB  text base: 0xffffff8001500000
      System model name: iMac18,1 (Mac-4B682C642B45593E)
      System shutdown begun: NO
      Panic diags file available: YES (0x0)
      System uptime in nanoseconds: 5030664182757
      last loaded kext at 64641308877: @filesystems.smbfs    3.4 (addr 0xffffff7f8322c000, size 450560)
      last unloaded kext at 223165165211: org.vulgo.NoVPAJpeg    1.2.8 (addr 0xffffff7f846b4000, size 12288)
      loaded kexts:
      config.plist
×