Nopam456 Posted October 19, 2018 Share Posted October 19, 2018 SPECS:Motherboard: MSI Z170A Cpu: I7 6700K GPU,Graphics card: Nvidia GTX 1070 Ram: 16GB Drives: I have 1 SSD for my windows and 2 HDD from 1tb and 2 tb, The 1TB is available for the hackintosh. Also disabled VD-T and enabled XHCI and disabled CFG Lock So i went through all the steps first i had an issue with my usb that it wasn't bootable Fix: Go to disk utility, find your USB and erase the data and use GUID Partition Map Now further with my problem, So i fixed that issue i had and then the installation was freezed on loading, then i turned on XHCI in bios usb configuration.. And also in clover into settings and removed dart=0,Then it started loading! BUT now after the loading i get the parking sign and i do not know what to do now. I tried everything, sometimes when i reinstalled everything i didn't have parking sign but just a reboot when the apple logo showed up very weird here is some verbose output:https://imgur.com/a/Re1oOsI#JRTeX63 So i tried literally everything... Please someone help me.. And like i don't know call in discord or anything and go through the installation with me cuz its just not working. And i don't know what i'm not doing or doing wrong... Thanks for the help Link to comment https://www.insanelymac.com/forum/topic/336053-help-just-cant-get-it-to-work/ Share on other sites More sharing options...
Gigamaxx Posted October 20, 2018 Share Posted October 20, 2018 10 hours ago, Nopam456 said: SPECS:Motherboard: MSI Z170A Cpu: I7 6700K GPU,Graphics card: Nvidia GTX 1070 Ram: 16GB Drives: I have 1 SSD for my windows and 2 HDD from 1tb and 2 tb, The 1TB is available for the hackintosh. Also disabled VD-T and enabled XHCI and disabled CFG Lock So i went through all the steps first i had an issue with my usb that it wasn't bootable Fix: Go to disk utility, find your USB and erase the data and use GUID Partition Map Now further with my problem, So i fixed that issue i had and then the installation was freezed on loading, then i turned on XHCI in bios usb configuration.. And also in clover into settings and removed dart=0,Then it started loading! BUT now after the loading i get the parking sign and i do not know what to do now. I tried everything, sometimes when i reinstalled everything i didn't have parking sign but just a reboot when the apple logo showed up very weird here is some verbose output:https://imgur.com/a/Re1oOsI#JRTeX63 So i tried literally everything... Please someone help me.. And like i don't know call in discord or anything and go through the installation with me cuz its just not working. And i don't know what i'm not doing or doing wrong... Thanks for the help nv_disable=1 boot arg? Link to comment https://www.insanelymac.com/forum/topic/336053-help-just-cant-get-it-to-work/#findComment-2641882 Share on other sites More sharing options...
Recommended Posts