Jump to content
Sign in to follow this  
Followers 0
DonAmalio24K

Respaldo Bios VIT m2400

1 post in this topic

Recommended Posts

Buenas tardes, Tengo un problema grande y complicado, solicito la ayuda de una persona que pueda darme una mano. Resulta que tengo una VIT M2400 plateada y por estar leyendo que habia una actualizacion para la bios le di instalar y ahora se desactivo la opcion "ahci" y no puedo ni volver a instalarle Win7 ni 10. He tratado de conseguir activar la opcion por ms-dos con symcmos y consegui ver la lista de codigos pero entre casi 300 o mas codigos no se cual activar y no quiero probar activar uno por uno por miedo a empeorar la situacion, he buscado en internet alguna backup y no he dado hasta ahora con ninguno, he conseguido multiples programas pero con la actualizacion en formato "WHP" ninguno logra abrirlo. logre conseguir dos imagenes bios pero no tengo la seguridad si me podrian ayudar o dañar la laptop. 


 


La pregunta es para saber si alguien que posea una laptop de igual modelo me podria ayudar haciendo una copia de su imagen bios y asi yo poder seguir con la creacion de una hackintosh. yo logre hacer el usb boot y se instalo pero por el error de la ahci no pude disfrutar del sistema por unos panic kernels los cuales no les consegui solucion en ningun lado. Agradezco de antemano la ayuda de la persona que pueda ayudarme.


 


Si alguien puede ofrecerme una ayuda le agradeceria de corazon ya no se que hacer tengo bastante tiempo tratando de solucionar el problema pero no lo consigo.


Share this post


Link to post
Share on other sites
Advertisement

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
Followers 0

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Luan Eduardo
      Installing macOS Mojave 10.14 on Gigabyte Z370N WIFI + i7 8700K + UHD 630



      Changelog:
       
      10/17/2018 08:12h GMT-0
      - Fix Kexts permissions commands adjusted.
      - Removed FrameBuffer patch that is not needed.
      - Added audio solution and HDMI.
      - Unfortunately DisplayPort does not work.
      - Replaced Wifi/BT with DW1560 (BCM94352Z)
       
      10/11/2018 04:15h GMT-0
      - Added USB 3.0 patch.
      - Adjusted some steps.
      - Changed text formatting.
       
      10/11/2018 03:42h GMT-0
      - Added missing UEFI configuration.
       
      10/07/2018 00:36h GMT-0
      - First version.
       
      What works and what does not
       
      - Processor ->  Work. All SpeedStep stages.
      - Video Card ->  Work. QE/CI and Metal.
      - Chipset ->  Work.
      - HDMI (1st) ->  Work.
      - HDMI (2nd) ->  Work.
      - DP ->  Not work.
      - Audio ->  Work.
      - HDMI Audio ->  Work.
      - WiFi/Bluetooth ->  Work. Replaced.
      - Ethernet (1st) ->  Work.
      - Ethernet (2nd) ->  Not work.
      - USB3.0 ->  Work.
      - Sleep ->  Work.
       
       
      Todo
       
      - Make audio work.
      - Make HDMI audio work.
      - Test DisplayPort.
      - Make second ethernet work.
      - Replace Wifi/Bluetooth.
       
       
      What you need to install

      - Running install of macOS
      - One USB flash drive of 8GB or bigger
      - macOS Mojave install app
      - Clover EFI
      - Clover Configurator
      - Some KEXTs


      How create create the install flash drive
       
      Prepare install flash drive

      Format the flash drive with GUID partition mapping and name it "Install".

      - Open Disk Utility.
      - Click in View, then "Show All Devices".
      - Select the destination flash drive, then Erase.
      - Name: Install, Format: Mac OS Extended (Journaled) and Scheme: GUID Partition Map
       
      Create install flash drive

      Open terminal and run this command:
      sudo /Applications/Install\ macOS\ .app/Contents/Resources/createinstallmedia --volume /Volumes/Install--nointeraction This will take about 30 minutes.
       


      Install bootloader

      Download the CloverEFI (used 4674) and install with this options on "Install macOS Mojave":
       
      - Install for UEFI booting only
      - Install Clover in the ESP
      - UEFI Drivers - ApfsDriverLoader-64
      - UEFI Drivers - AptioMemoryFix64


       
       
      Make things works

      Will be created a partition named EFI and mounted in Desktop. Edit the /Volumes/EFI/CLOVER/config.plist inside this new partition, open with Clover Configurator (used 5.2.1.0)
       
      Full UHD630 Acceleration
       
      config.plist (Clover Configurator): 
       
      - Uncheck: Acpi - Fixes - FixDisplay
      - Uncheck: Acpi - Fixes - AddHDMI
       
      - Change value: Gui - Screen Resolution to 3840x2160 (Your screen resolution, mine is 4k)
      - Change value: Rt Variables - CsrActiveConfig to 0x3
      - Select value: SMBIOS - Up/Down arrows - iMac18,1 - Intel Core i5-7360U @ 2.30Ghz (I know, it's not our processor, but is that option)
       
       
      Download those Kexts and put in /EFI/CLOVER/kexts/10.14/
       
      - Download the Lilu.kext from here. I used the version 1.2.7.
      - Download the WhateverGreen.kext. I used the version 1.2.3.RELEASE.
       
       
      All USBs (2.0, 3.0, Type-C, internal)
       
      config.plist (Clover Configurator): 
       
      - Add value: Kernel and Kext Patches - KextsToPatch:
                       Name*: com.apple.driver.usb.AppleUSBXHCI
                       Find* [HEX]: 83FB0F0F 83030500 00
                       Replace* [HEX]: 83FB0F90 90909090 90
                       Comment: disable port limit in XHCI kext (credit PMHeart)
                       MathOS: 10.14.x

       
       
      Sleep/Wake
       
      config.plist (Clover Configurator): 
       
      - Check: Boot - Arguments - dart=0
       
       
      Audio onboard and HDMI
       
      config.plist (Clover Configurator): 
       
      - Change: Device - Audio Injection - layout-id to 7
       
      Download those Kexts and put in /EFI/CLOVER/kexts/10.14/
       
      - Download the Lilu.kext from here. I used the version 1.2.7. (already installed above)
      - Download the AppleALC.kext from here. I used the version 1.3.2.
       
       
      Wifi and Bluetooth (DW1560 / BCM94352Z)
       
      Download those Kexts and put in /EFI/CLOVER/kexts/10.14/
       
      - Download the FakePCIID.kext and FakePCIID_Broadcom_WiFi.kext from here. I used the version 2018-1014.
      - Download the BrcmFirmwareRepo.kext, BrcmPatchRAM.kext and BrcmNonPatchRAM.kext from here. I used the version 2018-0505.
       
       
      Mandatory Kexts
       
      Download those Kexts and put in /EFI/CLOVER/kexts/10.14/
       
      - Download the FakeSMC.kext from here. I used the version 2018-0915.
      - Download the IntelMausiEthernet.kext from here. I used the version 2018-0424.
       
       
      Put the Clover installer on the flash drive too.
       
      Now you can start the instalation without problem (I guess).
       
       
      How install
       
      UEFI Setup Configuration and Installation

      UEFI configuration
       
      - Shutdown and insert the flash.
      - Power on with DEL pressed to enter BIOS setup.
      - Change value: Periphelrals - Initial Display to IGP
      - Change value: Periphelrals - USB Configuration - XHCI Hand-off to ENABLE
      - Change value: Chipset - VT-d to DISABLE
      - Change value: Chipset - Internal Graphics to ENABLE
      - Change value: Chipset - DVMT Pre-Allocated to 128M
      - Change value: Chipset - Wake On Lan to DISABLE
      - Save & Exit Setup
       
      - Now, hold the F12
      - In the list, select your flash drive.
      - It will show twice. One with UEFI prefix and another without.
      - Select with UEFI prefix. Ie.: "UEFI: Sandisk Cruzer"
       
      The installer will start. 
      
      Format destination disk

      Format the disk with GUID partition mapping and name it "HD".

      - Select Disk Utility in the list, then press Continue.
      - Click in View, then "Show All Devices".
      - Select the destination Disk, then Erase.
      - Name: HD, Format: APFS and Scheme: GUID Partition Map

      Close Disk Utility.
      
      Select "Install macOS", then Continue.
      Follow instructions in screen.

      After install

      After first part install the system will reboot.
      
      The second part of the installation will begin. This will take 16 minutes.
       

      Post installation

      Install bootloader
       
      When the second part of install finish, the system will reboot again.

      After performing the user initial setup and go to the desktop, you need to install Clover on internal disk.

      Open the Clover installer inside flash drive that you copied before.

      Use same options above but choose the system partition this time.

      Now you need to replace the config.plist inside your destination disk EFI parittion with config.plist inside flash card EFI partition.

      The flash drive EFI partition is unmounted. Mount with terminal "sudo diskutil mount /dev/rdiskXs1". To know what X is, use "diskutil list", most likely is 1.
       
      Last step
       
      Copy all Kexts from flash drive to /Library/Extensions, with those commands in Terminal:
      sudo cp -R /Volumes/EFI/EFI/CLOVER/kexts/10.14/* /Library/Extensions/ sudo chmod -R 755 /Library/Extensions sudo chown -R root:wheel /Library/Extensions sudo kextcache -system-prelinked-kernel sudo kextcache -system-caches Restart the system.
       
       
      It's done!

       
      And last but not least
       
      I would like to thank the following community members, by making these dream possible:
      @crushers, @snatch, @apianti, @blackosx, @blusseau, @dmazar, @slice2009, @autumnrain, @phpdev32, @EMlyDinEsH, @RehabMan, @Scellow, @mitch_de, @Shailua, @Andy Vandijck, @maxfierke, @ArturXXX, @LexHimself, @brumas and all others members involved directly or indirectly.
       
    • By macinsane
      Update: Now running Mojave! Thanks to mojave2core! Yeah   Still using C2D in 2019!
      Inserted a nice and cheap GT710 that is not relying on nVidias Webdrivers and runs OOB under Mojave.
       
      Nice, seeing High Sierra running on this old but capable system! It rocks with a new ASUS GT1030
       
      Config:
      Gigabyte EP43-DS3L
      Core2Quad Q9300
      6 GB DDR2 RAM
      Asus GT1030 2GB
      Sandisk SSD 128GB
      TP-Link AC1200 Wifi USB
      Inateck KT4006 USB 3.0 PCIe (No boot)
       
      SMBIOS: iMac14,1
      Clover: 4297  4360
       
      A good deal of DSDT editing was necessary to get this machine to boot High Sierra but finally it works flawlessly, even sleep and wake!
      You NEED to have the DSDT put in place for installation because otherwise macOS doesn't recognize the SATA ports.
      There are a few important BIOS settings: SATA hast to be set to AHCI and "native" and HPET has to be run "64-bit", I'd recommend to disable IDE and the serial and parallel port.
      For the GT1030 nVidia Webdrivers are needed, have to boot with nv_disable=1 until you have them installed.
      You have to install Clover in legacy mode because this old fella does not support UEFI.
       
      Only downside: The so often recommended Inateck USB-card isn't recognized by BIOS, so you cannot boot from it. It works perfectly within macOS though, have the ac-Wifi connected to it.
      config.plist.zip
      DSDT.aml.zip
    • By guilhermectp
      Hey guys,
      I'm working on a mATX build, but I'm really not sure about the mobo.

      I'm thinking about going with Gigabyte because look it's the easiest mobo to get everything working.
      But I'm really not sure about the model. so far the main differences are:

      H370M-D3H (there's an amazing guide here)
      - USB 3.1 Gen2
      - expansion for Intel CNVi WIFI (it will work?) Dell NGFF M.2 is a possible solution
      - limited to DDR4 2666/2400/2133 MHz

      Z370M-D3H
      - CPU/DDR4 overclocking (I'm not sure if it will work 100%...)
      - allows more DRR4 options over 3000 MHz

      And most important, about the installation itself, it's similar for both chips (H370 and H270) or one of then generally better?

      here is the link for the build parts:
      https://de.pcpartpicker.com/list/CqsKkd
    • By Gymnae
      Due to Apple's QA, an update to Mojave will come when Mojave reaches its second 2nd point release (aka .2)
       

      Introduction
      The H370 chipset powers 8th generation Intel Core-i CPUs. Even though the name H370 rings comparable to Z370, the H370 is based on newer silicon. This it also requires some new approaches compared to the Z370. An example would be on-die USB 3.1 and WiFi support.
       
      Since this guide is not a "hold-your-hand-every-step" guide, I assume you know:
      Clover installation and configuration How to create an install medium for MacOS Access and configure the BIOS Have heard of ACPI patching (I'm a newb at this myself)  
      What works
      Sleep (via DSDT edits and emulated NVRAM) On-board Audio (via CloverALC script) Native power management (without any kext or patch) All USB ports (and only those present are active) iGPU for both acceleration and display dGPU (I'm running an Nvidia GTX 1080)  
      Untested
      NIC --> I'm using WiFi only  
      What doesn't work
      Native NVRAM via AptioMemoryFix.efi DMVT Pre-alloc higher than 64MB (but not necessary)  
      Changes to the guide:
      22.5.18: Added SSDT hot-patching to enable sleep, replacing DSDT static patching as an alternative.
      23.5.18: Add iMac18,1 as alternative SMBIOS config for those relying on the iGPU for output
      25.6.18: Added update info
      28.8.18: Small changes for clarity, changed info for afps loading & updated USB patch for 13.6
      04.10.18: Update to Mojave will come once Mojave is more mature
       
      1. Installation
      This guide heavy inspired by the work of /u/corpnewt of /r/hackintosh and his (sorta) Vanilla guide
       
      1.1 Create the install media for MacOS
      Follow this, if you are using a Mac to start off with. If you are totally new to MacOS, then please check the basic guide Creation of an installer media in windows or linux
       
      1.2 Install Clover on the install media
      Using the Clover installer, ensure you are installing to the USB medium you are using for the installer.
      Chose the following options, leaving the others on default: 
       
      UEFI driver: AptioMemoryFix UEFI driver: ApfsDriverLoader UEFI booting only Install to ESP  
      You have to get your hands on an apfs.efi. A google search can help, or extracting it from the Installer package. Make sure you procure a version matching the MacOS version you are about to install. Place the apfs.efi in drivers64UEFI.
       
      1.2 Adjust the config.plist for the installer
      You can use the config.plist attached as a guideline, but take a look at it before and at least adjust the SMBIOS - otherwise it won't boot.
      Attention: The attached plist contains audio patches introduced by a post-install step. If you run into problems, you might remove those. It also contains a manual slide value, which should normally not be needed, but works fine for me. It is also tuned for usage with an Nvidia Pascal dGPU as main GPU.
       
      The config you create now should serve you nicely for install and running the system.
       
      Take care of adding the following basics:
      SMBIOS: iMac18,3 - You can generate a serial number via Clover Configurator. The creation of a proper SMBIOS is covered in many guides to good extend Note: If you aim at using the iGPU for output, a user reported that iMac18,1 works better - since iMac18,3 produces sever flicker. Look at the graphics section and adjust the injection for Intel to your situation  
      Fixes

      Patches

      Devices

      Graphics
      Important:
      Change 0x59120003 to 0x59120000 if you don't use a dGPU as your main display Driver and instead use the iGPU for output.
      Also note. SMBIOS iMac18,1 has been reported to work better in this configuration. But 18,3 works fine for me.

      Kernel and Kext patches
       
      1.3 kexts and friends
      Add the supplied SSDT-UAIC.aml to "patched" - it limits the injected USB Ports to the actual number and ports valid for this board.
       
      Required kexts on "Other":
      FakeSMC.kext IntelGraphicsFixup.kext Lilu.kext When having an Nvidia card: NvidiaGraphicsFixup.kext IntelMausiEthernet.kext in case you're running Ethernet USBInjectAll.kext with the HCI-300-series-injector.kext --> These two should be installed to /L/E after install  
      We are leaving sound out at the moment, this is something for post-install. Please note the absence of Shiki, I don't find it necessary. Video material I tried made use of the iGPU without shiki.
       
      1.4 Check BIOS and install
      You should be ready for install. But before you reboot, please take a look at your BIOS and set it up accordingly (copied from the aforementioned guide and adapted):
      Load Optimized Defaults Disable VT-d setting If your system has Secure Boot Mode, disable it Set OS Type to Windows 8/10 or OtherOS - I have not seen a difference Turn off internal Serial and Parallel port Turn off Network stack for boot Turn off wake-on-lan (for now) Set XHCI Handoff to Enabled Don't enable decode over 4G Depending on your GPU, set priority for boot Set internal GPU to enable Set DMVT pre-alloc to 64MB Set USB legacy to enabled Activate XMP profile 1 f your Ram has it (mine doesn't and I added the timings manually) Set ERP to enable, disable platform power management (I need to do more research if this could be enabled)  
      I've attached my current BIOS config "hack2". You can place that on a fat32 drive (the EFI partition of your install USB drive might be an idea) and see if it loads. It's made for and with the F2 BIOS.
       
      The install itself should be like other MacOS Hackintosh installs with it several reboots and ensuring to select the correct boot device in Clover.
       
      2. Post-install
       
      2.1 Install clover on target
      This is a no-brainer, but install a fresh copy of Clover on your target medium.
       
      During install select again AptioMemoryFix but also additionally
      EmuVariableUefi-64.efi Install RC scripts on target volume because otherwise NVRAM doesn't seem to work
       
      After the install, copy
      config.plist contents of "Other" content of "patched" apfs.efi from drivers64UEFI to your new clover install.
       
      2.1 Edit ACPI for slumber
      Choose one option, not both. The hot-patch is experimental, but for the moment it is stable.
       
      2.1.1 Edit DSDT
      This is necessary only once on initial install and every time, you edit or upgrade the BIOS. The DSDT.aml attached to this post might work for your system or give you a file to compare to. Don't expect it to work for you, though.
      I won't go into the details of DSDT extraction and patching. There are better guides (the linked guide is a rip-off of rehabman's guide from a different forum). Please follow such a guide to extract your ACPI data.
       
      Locate and disassemble the DSDT with the newest iasl binary you can put your hands on, then open it with MacIASL in its newest version you can find (Hint: Here is a good source) You can check if the version is new enough if MacIASL doesn't throw error upon compiling a freshly extracted DSDT.aml or DSDT.dst
       
      Add rehabmans repo (as per linked guide) and apply the following patches:
      Rename _DSM to _XDSM Fix _WAK Arg0 v2 USB3 _PRW 0x6D Skylake (instant wake) Find the CNVW device and remove the _PWR function there.
       
      Compile the DSDT and place it in "patched".
       
      2.1.2 Use SSDT hot-patching
      Instead of having to re-extract and re-patch the DSDT on every BIOS change or update, Hardware change one can also use ACPI hot-patching.
      It's a combination of config.plist patches and an SSDT, which is hot-patched into the ACPI (if I understand the process correctly)
       
      You need to add this SSDT-GPRW.aml to your Clover folder in the designated position at Clover/ACPI/patched You need to add this patch to your config.plist. It goes into the DSDT patch section  
      Note: This works for me, but the patch removes the _PRW method from all devices in the DSDT. This could have side-effects. So far, I have seen none. At the moment I'm also not applying any other patch, compared with the additional edits I made to the DSDT method before.
       
      2.2 Install kexts to system
      As mentioned in the install section, it's better to follow rehabman's instruction and install USBinjectAll.kext to /L/E:
      sudo cp -R Release/USBInjectAll.kext /Library/Extensions sudo touch /System/Library/Extensions && sudo kextcache -u / 2.3 Enable onboard Audio
      This is where I'm not so happy currently, I'd like it to work without altering AppleHDA. But currently I find no other way.
       
      2.3.1 Install FakePCIID & FakePCIID_Intel_HDMI_Audio
      Rehabman tells us to use a kext installer to install it to /S/L/E. Chose the RELEASE folder
       
      2.3.2 Run CloverALC command
      Ensure your EFI partition is mounted before running this command
      Get the newest version of CloverALC command (audio_cloverALC-xxx.sh) and run it. Our Audio codec is RTL887 and I'm running with layout ID 1
       
      2.4 Optional steps
      If you have a dGPU, now it's the time to install its drivers and adjust the config.plist for it.
      This is out of scope of this guide. Yet, my supplied config.plist is ready to be used with Nvidia Pascal cards and using the Nvidia web driver.
       
      3. Updating
      Updating inside 10.3.x point updates doesn't require much attention:
      Download the update from the AppStore as any Mac would do Allow the system to reboot Before booting MacOS with Clover, make sure to disable extra drivers for dGPUs which require non-native support. If using an Nvidia dGPU: Remove "nvda_drv=1"  from your boot arguments and disable Nvidia injection If using a non natively supported AMD card, do the same for AMD (I'm not using AMD, thus I cannot be specific) Boot into the newly created Install MacOS partition Repeat this process until the Install partition is gone Boot MacOS again, still following 3., and potentially install updated drivers Your Audio might require re-patching  
      4. ToDo
      Move away from static DSDT patching to SSDT hotpatching --> requires my work Native NVRAM --> requires developer work Audio without AppleHDA patching --> requires developer work  
      5. Thanks to
      @MaLd0nfor helping finding the right way with the DSDT
      @RehabMan, for being a legend and helping me out patching
      @toleda, for audio patches for the 300 series
      /u/corpnewt, for his superb vanilla guide
      @wmchris for his super XPS 9550 guide and introducing me to hot-patching
      all the developers of clover and it's awesomeness
       
      SSDT-UIAC.aml
      config.plist
      DSDT.aml
      hack2
×