Amilo Pa 1510 installation

[gio on the mic]

This SHOULD be a guide to get 10.4.6 on fujitsu siemens Amilo Pa 1510.

It's still on progress but i hope it can help

 

I'm testing uphuck v. 1.3 of osx86 10.4.9. I will update this guide in a few days...

 

BASIC SYSTEM INSTALLATION

OK, so here it is, this is what i did a step by step:

 

1) get 10.4.6 JaS DVD

2) partition your physical hard drive (in my case i first partioned my hd with partition magic, and reserved 20 GB in primary partition number 2). DON'T use logical partition as i read it won't work!

3) create a virtual machine in vmware which uses your physical hard drive

4) install os x with JaS DVD in the virtual machine on the physical drive (during installation select "ad hoc install" and check all AMD patches but SSE3, since SSE3 is not working/recognized) + wireless support

5) be sure that you can boot your partition (i used thewindows xp chain0 method, you can find info on this approach searching the forum)

6) start os x in virtual machine.

7) Now the sata recognition part: Open Applications > Utilities > Terminal

8) type the following (if you don't know how to use vi check some guide on the web ) :

sudo su:

vi /System/Library/Extensions/AppleVIAATA.kext/Contents/Info.plist

9) in the VIA SATA Controller section, edit the line under IOPCIPrimaryMatch adding the ATI sata controller id 0x43791002

line change from this:

<string>0x31491106 0x00e310de 0x005510de</string>

to this:

<string>0x43791002 0x31491106 0x00e310de 0x005510de</string>

10) save the file and quit vi, then type this:

rm /System/Library/Extensions.mkext

rm /System/Library/Extensions.kextcache

11) shutdown os x in the virtual machine

12) now you can start os x in native mode.

 

IMPORTANT:

13) to avoid stutter problems edit /Library/Preferences/com.apple.Boot.plist the line under "<key>Kernel Flags</key>" like this:

<string>-v -f platform=ACPI idlehalt=0</string>

 

NETWORK

This is the solution for the onboard Realtek 8139:

http://forum.insanelymac.com/index.php?showtopic=38223

And the wireless card (broadcom 4318) should work if you follow this guide

http://forum.insanelymac.com/index.php?showtopic=8522

(you should not need to add the line in the Info.plist as it should already be present, just pay attention to en0/en1 part)

 

VIDEO

Download omni's "Callisto b003 fixed" drivers to get your radeon express 1100 graphic card working @ 1280x800

Put the 2 kext in /System/Library/Extensions directory with the right ownership (root:wheel) then you need to set this device id: 0x59751002 in this file: CallistoHAL.kext/Contents/Info.plist

No CI/QE support, but this is good enough for me.

 

DVD ACCESS

-download Zappadoc's ATI IXP driver to get the PATA controller for dvd working (find info/stuff herehttp://forum.insanelymac.com/index.php?showtopic=9847)

 

problems:

-Realtek Audio (0861) NOT WORKING (searching for a solution)

Edited June 20, 2007 by gio on the mic

[gio on the mic]

i also tested 10.4.8 with kernel 8.8.1 by semthex

http://forum.insanelymac.com/index.php?showtopic=32250

no more stuttering or kextcache problem at reboot.

you still need to patch sata for hd and "via ata" for dvd.

[motroxx]

is there any new support for ethernet, wlan or sound?

 

thanks

[gio on the mic]

sound is working somehow, you need to patch the azalia kext (search the forum) with the vendor and device id (vendor: 10ec - device:0861).

that enables output but i'm still not able to change any setting (audio card is not seen in system profiler).

 

as for the ethernet card, that's driving me crazy: en0 is somehow listed in the hardware but appears disabled in Network Preferences (only shown in network ports, not in network status). I guess it has something to do with dependecies from other extensions (see AppleRTL8139 under Extensions in System Profiler)

 

let me know if you find a solution

[motroxx]

I tried 10.4.8 and it crashed

You've done it by this howto: http://forum.insanelymac.com/index.php?showtopic=32250, dont you?

 

 

I'll try it the next days again...

it needs so much time :-(

[gio on the mic]

yeah, i used the instructions from that semthex's thread.

mind that you need to use a working 10.4.6 installation to set up 10.4.8 on ANOTHER partition.

i just did everything step by step and it worked.

[bliss]

how about pcmcia? is it working? or the card reader?

[motroxx]

Sorry, I cant try...

 

Auf deutsch:

Kann leider beides nicht ausprobieren, da ich keine PCMCIMA karte oder speicherkarten habe. Ich gehe aber davon aus, dass es nicht funktioniert.

Der SPeicherkartenleser funktioniert schon unter linux (glaub) nicht.

 

Aber das System ist (meiner Meinung nach) eh nicht unbedingt Produktiv einsetzbar.

 

how about pcmcia? is it working? or the card reader?

[thgupznk2]

I know that this topic is quite old, but I think my problems match here best:

1. I'm not able to install Callisto drivers on my Amilo 1510. I'm following the installation guide step by step, but after rebooting I can't choose my 1280x800 resolution.

2. How do I manage it that Mac conects to my favourite WLAN automatically after starting?

 

I don't have just questions, but also solutions:

The realtek audio works perfectly with Azalia Audio!

I've got 10.4.8.

[DocDoom]

UNFINISHED HOW TO: GETTING RUN AN AMILO Pa1510 with Leopard 10.5.1 Toh RC2/3?

 

 

ALLWAYS USE AS STARTOPTION -f or edit your /Library/Preferences/com.apple.Boot.plist as mentioned above

 

1. Install Leopard 10.5.1 Toh DVD using an USB SATA HDD Adapter

2. Getting Partition to boot

2a. Reboot in Leopard Install Menue

2b. Open Terminal

diskutil list

fdisk -u /dev/disk1

y

fdisk -e /dev/disk1

print

f 1

w

y

q

reboot

 

3. Build in the HDD into the Notebook again

3a. Check if booting from HDD works (Leopard wont start at this time)

 

4. Patching SATA Driver for ATI Xpress Chipset

4a. get a Copy from AppleVIAATA.kext (i took from my Kalyway Installation) and copy it to /System/Library/Extensions

4b. add 0x43791002 to the VIA SATA Section below IOPCIPrimaryMatch (not needed by using the Kalyway AppleVIAATA.kext)

 

4c. delete Extensions.mkext and Extensions.mkext.cache in /System/Library

 

5. Try if it works and use USB Keyboard and USB Mouse for now, because the Touchpad and Keyboard wont work

DO NOT USE THE X200 IOUSBFamilykext !!! WILL CAUSE A CRASH !!!

 

6. get the ApplePS2Controller.kext from here: http://forum.insanelymac.com/index.php?showtopic=21952

6a. Copy it into /Systems/Library/Extensions

6b. open Terminal and enter:

sudo chown -R root:wheel /Systems/Library/Extenstions/ApplePS2Controller.kext

sudo chmod -R 755 /Systems/Library/Extenstions/ApplePS2Controller.kext

sudo rm -rf /Systems/Library/Extensions.mkext

sudo rm -rf /Systems/Library/Extensions.mkext.cache (might be optional)

sudo reboot

 

 

UPDATE !!!

 

got WLAN Working, but without WPA Support, using the IOPCIFamily.kext and the IO80211bg.kext from the Uphuk 1.3 AMD 10.4.9 Tiger Version and edited the Info.Plist of the AirPortAtheros.kext.

 

sudo -s

nano /System/Library/Extensions/IO80211bg.kext/Contents/Plugins/AirPortAtheros.kext/Contents/Info.Plist

 

Enter your PCI ID and VendorID of the Atheros 5005G here. was "pci168c,1a" for my card.

 

Ctrl-O

Enter

Ctrl-X

 

chown -R root:wheel /System/Library/Extensions/IO80211bg.kext/

chmod -R 755 /System/Library/Extensions/IO80211bg.kext/

rm -rf /System/Library/Extensions.mkext

 

reboot

 

 

 

UPDATE !!!

 

got VGA Resolution Change Working, by using Callisto b003 fixed, Katana and Natit (installed in this ordner)

links and detail description will follow soon.

 

 

THX TO Insanelymac.com for this great forum

SPECIAL THX to the MIGHTY SEARCH FUNCTION !!!!! (Use it before asking anything)

 

GREAT THX TO

 

gio on the mic (for his Tiger Install Guide)

Tom H (for the ApplePS2Controller.kext)

niguh (for his Atheros Guide)

Diabolik (for Natit)

Omni (for Callisto)

the Katana Crew (for their Drivers)

 

 

 

UPDATE !!!!!

 

Got everything working now, but was to lazy to get a closer look to the CardReader and or the FireWire.

i will finish this guide soon, so you all can enjoy Leopard on your Amilo Notebook.

 

 

Greetings

Doc

[keef247]

any news on this im hoping i can whack ideneb5 on there or iatkos 4i or 5i or whatever.does the sound/wifi/graphics all work nicely.will it update to 10.5.6 what settings did you use.

[ApocalypseViruz]

I've a FSC Amilo PA-1510 and just succesfully installed iDeneb Version 10.5.5.

The install process takes about 1 hour. The first boot is awfully long, I've waited for about 15 minutes to startup.

 

As it's a fresh install I've still to get everything working besides Ethernet.

I will post my progress in this thread and I hope anyone else can also contribute. Actually I still can't believe that so few people own that POS laptop

[Daniel G]

I do have the same laptop and i want more info

i tried kalyway leopard 10 5 2 no luck

any hepl will be ok

 

Daniel

skype ganeadaniel

 

I've a FSC Amilo PA-1510 and just succesfully installed iDeneb Version 10.5.5.

The install process takes about 1 hour. The first boot is awfully long, I've waited for about 15 minutes to startup.

 

As it's a fresh install I've still to get everything working besides Ethernet.

I will post my progress in this thread and I hope anyone else can also contribute. Actually I still can't believe that so few people own that POS laptop

 

i have a AMD Turion X2 TL-50

i try to install kalyway leopard 10 5 2

i think it doesen t see my hard drive

any help ?

 

Daniel

skype ganeadaniel

 

This SHOULD be a guide to get 10.4.6 on fujitsu siemens Amilo Pa 1510.

It's still on progress but i hope it can help

 

I'm testing uphuck v. 1.3 of osx86 10.4.9. I will update this guide in a few days...

 

BASIC SYSTEM INSTALLATION

OK, so here it is, this is what i did a step by step:

 

1) get 10.4.6 JaS DVD

2) partition your physical hard drive (in my case i first partioned my hd with partition magic, and reserved 20 GB in primary partition number 2). DON'T use logical partition as i read it won't work!

3) create a virtual machine in vmware which uses your physical hard drive

4) install os x with JaS DVD in the virtual machine on the physical drive (during installation select "ad hoc install" and check all AMD patches but SSE3, since SSE3 is not working/recognized) + wireless support

5) be sure that you can boot your partition (i used thewindows xp chain0 method, you can find info on this approach searching the forum)

6) start os x in virtual machine.

7) Now the sata recognition part: Open Applications > Utilities > Terminal

8) type the following (if you don't know how to use vi check some guide on the web ) :

sudo su:

vi /System/Library/Extensions/AppleVIAATA.kext/Contents/Info.plist

9) in the VIA SATA Controller section, edit the line under IOPCIPrimaryMatch adding the ATI sata controller id 0x43791002

line change from this:

<string>0x31491106 0x00e310de 0x005510de</string>

to this:

<string>0x43791002 0x31491106 0x00e310de 0x005510de</string>

10) save the file and quit vi, then type this:

rm /System/Library/Extensions.mkext

rm /System/Library/Extensions.kextcache

11) shutdown os x in the virtual machine

12) now you can start os x in native mode.

 

IMPORTANT:

13) to avoid stutter problems edit /Library/Preferences/com.apple.Boot.plist the line under "<key>Kernel Flags</key>" like this:

<string>-v -f platform=ACPI idlehalt=0</string>

 

NETWORK

This is the solution for the onboard Realtek 8139:

http://forum.insanelymac.com/index.php?showtopic=38223

And the wireless card (broadcom 4318) should work if you follow this guide

http://forum.insanelymac.com/index.php?showtopic=8522

(you should not need to add the line in the Info.plist as it should already be present, just pay attention to en0/en1 part)

 

VIDEO

Download omni's "Callisto b003 fixed" drivers to get your radeon express 1100 graphic card working @ 1280x800

Put the 2 kext in /System/Library/Extensions directory with the right ownership (root:wheel) then you need to set this device id: 0x59751002 in this file: CallistoHAL.kext/Contents/Info.plist

No CI/QE support, but this is good enough for me.

 

DVD ACCESS

-download Zappadoc's ATI IXP driver to get the PATA controller for dvd working (find info/stuff herehttp://forum.insanelymac.com/index.php?showtopic=9847)

 

problems:

-Realtek Audio (0861) NOT WORKING (searching for a solution)

[ApocalypseViruz]

Well... Kalaway 10.5.2 didn't work for me either.

With iDeneb 10.5.5 it's working - but it needs heavy tweaking.

 

The install options I chosen:

[X] AMD Patch

[X] Kernel -> [X] StageXNU

[X] Chipset -> [X] VIA -- SB

[X] Network -> [X] Wireless -> [X] Atheros WiFi Adapter

[X] Fix -> [X] Power management

 

Make sure not to enable anything in the Gfx section.

 

The system isn't quite useable after the direct install as I already mentioned, the boot process takes at least 5 minutes, shutdown and restart works though. Haven't tried sleep yet.

The resolution is bound to 1024x768 but using this thread you can probably sort it out. (Callisto fixed drivers).

The dvd drive isn't being recognized either.

 

What does work ootb is Ethernet

[Daniel G]

I start downloading it, i wanna know if the harddisk has only one partition

what size does your harddisk has type

or you have a dual boot with Windows XP

what parameters did you used for boot if any or simply enter.

 

Thanks for reply.

Daniel

 

 

Well... Kalaway 10.5.2 didn't work for me either.

With iDeneb 10.5.5 it's working - but it needs heavy tweaking.

 

The install options I chosen:

[X] AMD Patch

[X] Kernel -> [X] StageXNU

[X] Chipset -> [X] VIA -- SB

[X] Network -> [X] Wireless -> [X] Atheros WiFi Adapter

[X] Fix -> [X] Power management

 

Make sure not to enable anything in the Gfx section.

 

The system isn't quite useable after the direct install as I already mentioned, the boot process takes at least 5 minutes, shutdown and restart works though. Haven't tried sleep yet.

The resolution is bound to 1024x768 but using this thread you can probably sort it out. (Callisto fixed drivers).

The dvd drive isn't being recognized either.

 

What does work ootb is Ethernet

[Daniel G]

i press F8 at start booting then try enter, also then -x then -v

i see an grey screen with apple logo if i press a key it does load

for 1 second it seeyz in the logo then stop

what can i use?you just press enter???

 

Thanks

Daniel

 

Well... Kalaway 10.5.2 didn't work for me either.

With iDeneb 10.5.5 it's working - but it needs heavy tweaking.

 

The install options I

[X] AMD Patch

[X] Kernel -> [X] StageXNU

[X] Chipset -> [X] VIA -- SB

[X] Network -> [X] Wireless -> [X] Atheros WiFi Adapter

[X] Fix -> [X] Power management

 

Make sure not to enable anything in the Gfx section.

 

The system isn't quite useable after the direct install as I already mentioned, the boot process takes at least 5 minutes, shutdown and restart works though. Haven't tried sleep yet.

The resolution is bound to 1024x768 but using this thread you can probably sort it out. (Callisto fixed drivers).

The dvd drive isn't being recognized either.

 

What does work ootb is Ethernet

[Daniel G]

the harddisk is detected with iDeneb 10.5.5 booting press F8

at prompt just type -s then use what it says the 2 lines :

/sbin/fsck -fy

/sbin/mount -uw /

 

then type

exit

and graphical starts use disk utilities and i see my hard drive with all partition.

 

Daniel

 

i press F8 at start booting then try enter, also then -x then -v

i see an grey screen with apple logo if i press a key it does load

for 1 second it seeyz in the logo then stop

what can i use?you just press enter???

 

Thanks

Daniel

[Daniel G]

I used per iDeneb 10.5.5:

 

AMD PAtch

Appleazaliaudio

VIA SB

Kernel 9,4,0 STAGEXNU

fix :Powermanagement

Applications : all

 

And start in -v -x mode because it freeze if not

Daniel

 

 

Well... Kalaway 10.5.2 didn't work for me either.

With iDeneb 10.5.5 it's working - but it needs heavy tweaking.

 

The install options I chosen:

[X] AMD Patch

[X] Kernel -> [X] StageXNU

[X] Chipset -> [X] VIA -- SB

[X] Network -> [X] Wireless -> [X] Atheros WiFi Adapter

[X] Fix -> [X] Power management

 

Make sure not to enable anything in the Gfx section.

 

The system isn't quite useable after the direct install as I already mentioned, the boot process takes at least 5 minutes, shutdown and restart works though. Haven't tried sleep yet.

The resolution is bound to 1024x768 but using this thread you can probably sort it out. (Callisto fixed drivers).

The dvd drive isn't being recognized either.

 

What does work ootb is Ethernet

[ApocalypseViruz]

Well yes, I didn't have any freezes at all. The biggest problem with this laptop, mac os x is just freaking slow (at least for me) I gave up trying to tweak it and went with ubuntu Let's face the truth, FSC Amilo with AMD cpu's just isn't made for MacOSX.

Hell, even my PowerMac G3 B&W is a lot faster.

[Daniel G]

i have used this:

 

http://forum.insanelymac.com/index.php?sho...=0#entry1067330

 

i have a IPC Mac OS X 10.5.6:

 

Laptop FUJITSU SIEMENS Amilo Pa 1510 AMD Turion 64X 1.6Gx2 120G

Realtek ALC861 @ ATI SB450

ATI Radeon XPress 1100 0x5975

 

i'll write you the output:

 

 

Display:

 

Type: Display

Bus: PCI

VRAM (Total): 128 MB

Vendor: ATI (0x1002)

Device ID: 0x5975

Revision ID: 0x0000

Kernel Extension Info: No Kext Loaded

Displays:

Display:

Resolution: 1024 x 768

Depth: 32-bit Color

Core Image: Software

Main Display: Yes

Mirror: Off

Online: Yes

Quartz Extreme: Not Supported

 

the bottom bar is transparent i see now VRAM (Total): 128 MB which is far good i did not

manage to to that with others kext, but for QE/CI hardware acceleration i do not know what to put,maybe now to try calistro 3.If you have any ideea.

 

This SHOULD be a guide to get 10.4.6 on fujitsu siemens Amilo Pa 1510.

It's still on progress but i hope it can help

 

I'm testing uphuck v. 1.3 of osx86 10.4.9. I will update this guide in a few days...

 

BASIC SYSTEM INSTALLATION

OK, so here it is, this is what i did a step by step:

 

1) get 10.4.6 JaS DVD

2) partition your physical hard drive (in my case i first partioned my hd with partition magic, and reserved 20 GB in primary partition number 2). DON'T use logical partition as i read it won't work!

3) create a virtual machine in vmware which uses your physical hard drive

4) install os x with JaS DVD in the virtual machine on the physical drive (during installation select "ad hoc install" and check all AMD patches but SSE3, since SSE3 is not working/recognized) + wireless support

5) be sure that you can boot your partition (i used thewindows xp chain0 method, you can find info on this approach searching the forum)

6) start os x in virtual machine.

7) Now the sata recognition part: Open Applications > Utilities > Terminal

8) type the following (if you don't know how to use vi check some guide on the web ) :

sudo su:

vi /System/Library/Extensions/AppleVIAATA.kext/Contents/Info.plist

9) in the VIA SATA Controller section, edit the line under IOPCIPrimaryMatch adding the ATI sata controller id 0x43791002

line change from this:

<string>0x31491106 0x00e310de 0x005510de</string>

to this:

<string>0x43791002 0x31491106 0x00e310de 0x005510de</string>

10) save the file and quit vi, then type this:

rm /System/Library/Extensions.mkext

rm /System/Library/Extensions.kextcache

11) shutdown os x in the virtual machine

12) now you can start os x in native mode.

 

IMPORTANT:

13) to avoid stutter problems edit /Library/Preferences/com.apple.Boot.plist the line under "<key>Kernel Flags</key>" like this:

<string>-v -f platform=ACPI idlehalt=0</string>

 

NETWORK

This is the solution for the onboard Realtek 8139:

http://forum.insanelymac.com/index.php?showtopic=38223

And the wireless card (broadcom 4318) should work if you follow this guide

http://forum.insanelymac.com/index.php?showtopic=8522

(you should not need to add the line in the Info.plist as it should already be present, just pay attention to en0/en1 part)

 

VIDEO

Download omni's "Callisto b003 fixed" drivers to get your radeon express 1100 graphic card working @ 1280x800

Put the 2 kext in /System/Library/Extensions directory with the right ownership (root:wheel) then you need to set this device id: 0x59751002 in this file: CallistoHAL.kext/Contents/Info.plist

No CI/QE support, but this is good enough for me.

 

DVD ACCESS

-download Zappadoc's ATI IXP driver to get the PATA controller for dvd working (find info/stuff herehttp://forum.insanelymac.com/index.php?showtopic=9847)

 

problems:

-Realtek Audio (0861) NOT WORKING (searching for a solution)

[giovanniTA88]

news on x1100 qe/ci?