Happymax1212 Posted June 9, 2017 Share Posted June 9, 2017 Hi all I'm trying to boot a macOS 10.12.5 installer with Clover 4076 from my usb2.0 drive on my X99 build. I selected verbose mode, used OsxAptioFix2Drv.efi and it stopped here: Error allocating 0x11959 pages at 0x0000000007313000 alloc type 2 Couldn't allocate runtime area Boot failed, sleeping for 10 seconds before exiting... Then I replaced OsxAptioFix2Drv-64.efi with OsxAptioFixDrv-64.efi, and it simply stops showing me a line of plus signs(+++++++++++). The same thing also happens when I used OsxAptioFixDrv256m-64.efi This is my build: Motherboard: ASUS X99 A-II(with a BIOS released in March, 2017) CPU: intel xeon e5 2620 v4 @2.1ghz(8c16t) RAM: 4x 8GB Kingston Fury DDR4 (running at 2133mhz) GPU: RX480 8G (Sapphire Nitro) Primary Drive: intel 750 ssd 400g Wireless Adapter & BT: Broadcom BCM4360 LAN: intel i218-v Audio: realtek ALC-1150 So I've got 3 PCI-E cards installed, RX480(PCI-E3.0 x16), intel750(PCI-E3.0 x4) and BCM4360(PCI-E2.0 x1) CSM is disabled in BIOS. Link to comment https://www.insanelymac.com/forum/topic/324314-failure-while-booting-from-usb-installer-with-clover-4076-on-asus-x99-a-ii/ Share on other sites More sharing options...
grandosegood Posted August 9, 2017 Share Posted August 9, 2017 I too am stuck at the plus signs, only I'm using rampagedev's legacy method. Link to comment https://www.insanelymac.com/forum/topic/324314-failure-while-booting-from-usb-installer-with-clover-4076-on-asus-x99-a-ii/#findComment-2476802 Share on other sites More sharing options...
Recommended Posts