marcoscar Posted January 12, 2016 Author Share Posted January 12, 2016 Everywhere I find it... I delete it ? That you mean, on my HD, USB INSTALLER, and .plist? Link to comment https://www.insanelymac.com/forum/topic/310319-two-boots-before-el-capitan-ok/page/2/#findComment-2206050 Share on other sites More sharing options...
xaverloisl Posted January 13, 2016 Share Posted January 13, 2016 hi... no way... I tried again but same problem. I boot with my USB Key installer.... choose my capitan disk... option appleintelCPUPM... let run.... and reboot again and again... see my step by step screenshots : 1- my clover boot screen : my HD, the recovry and my USB installer 2- choose the Binaries patching menu, any boot Args to type? : 3- tick the "AppleIntelCPUPM" option, do I have any more option to tick? Do I have to let the "Kext patching allowed" ticked? : 4- boot on my capitan disk : 5- let run and wait.... first "stop" (about 30 seconds): last line before second stop and reboot : Do I have to change my .plist on my USB installer with yours? before doing this differnts steps? I used the same usb Installer than I used to instal Capitan.. with my first .plist, the one I sent you... and you told me it was something wrong.... do you have any oher ideas? sorry... it get me mad!! Thks Marco In this case I had to disable EIST in BIOS, then everything worked fine! Link to comment https://www.insanelymac.com/forum/topic/310319-two-boots-before-el-capitan-ok/page/2/#findComment-2206224 Share on other sites More sharing options...
marcoscar Posted January 13, 2016 Author Share Posted January 13, 2016 In this case I had to disable EIST in BIOS, then everything worked fine! Hi thanks for helping... I willl try tonight... what about the "RealtekRTL81xx.kext", did you delete it? Can you tell me where can I find this option in bios? which menu? I hope i have this option on my old card.... Thanks Link to comment https://www.insanelymac.com/forum/topic/310319-two-boots-before-el-capitan-ok/page/2/#findComment-2206235 Share on other sites More sharing options...
carbo178 Posted January 13, 2016 Share Posted January 13, 2016 You can also put NullCPUPM in EFI/CLOVER/Kexts/10.11 NullCPUPowerManagement.kext.zip Link to comment https://www.insanelymac.com/forum/topic/310319-two-boots-before-el-capitan-ok/page/2/#findComment-2206275 Share on other sites More sharing options...
marcoscar Posted January 13, 2016 Author Share Posted January 13, 2016 Thks... I'm a little lost with all this advices : ) What about the "RealtekRTL81xx.kext" and "DSDT" now? Do I have to keep my "FakeSMC.kext" or replace it by your "NullCPUPM" ? Do I have to disable EIST in BIOS ? as xaverloisl told me... thanks mister ! Link to comment https://www.insanelymac.com/forum/topic/310319-two-boots-before-el-capitan-ok/page/2/#findComment-2206294 Share on other sites More sharing options...
carbo178 Posted January 13, 2016 Share Posted January 13, 2016 First try to disable EIST in bios, if doesn't work: Put NullCPUPM into 10.11 folder (don't delete FakeSMC, it's necessary for OS X), if doesn't work: Delete Realtek81xx kext from all folders you find the kext The DSDT is the next step, when the system boot without issues Link to comment https://www.insanelymac.com/forum/topic/310319-two-boots-before-el-capitan-ok/page/2/#findComment-2206303 Share on other sites More sharing options...
marcoscar Posted January 13, 2016 Author Share Posted January 13, 2016 Ok... I will try and let you Know... Link to comment https://www.insanelymac.com/forum/topic/310319-two-boots-before-el-capitan-ok/page/2/#findComment-2206307 Share on other sites More sharing options...
marcoscar Posted January 13, 2016 Author Share Posted January 13, 2016 First try to disable EIST in bios, if doesn't work: Put NullCPUPM into 10.11 folder (don't delete FakeSMC, it's necessary for OS X), if doesn't work: Delete Realtek81xx kext from all folders you find the kext The DSDT is the next step, when the system boot without issues ok... I disabled EIST in my BIOS.... the first boot from my USB Insteller was ok... but after few seconds on my desktop I had a kind of panic kernel... and my computer reboot. I CAN'T BOOT without my USB Installer... how can I fix that? what can I do to boot directly from my HD capitan without using my USB installer? Do I have some options to instal with "Clover OS X El Capitan-V7" ? which one? now I rebooted from my USB and i'm still on my desktop... everything lokks ok, even my button eject work! i'm waiting, let my OS running.... to see what happen... if any panic come again disturb me! DO I need to put NullCPUPM into 10.11 folder now? Delete Realtek81xx kext from all folders you find the kext? Can I extract my DSDT now? here is the dsdt (booting from my USB key)... if it can help... DSDT.pdf.zip Link to comment https://www.insanelymac.com/forum/topic/310319-two-boots-before-el-capitan-ok/page/2/#findComment-2206343 Share on other sites More sharing options...
carbo178 Posted January 13, 2016 Share Posted January 13, 2016 You can extract dsdt with MacIasl, save the file as DSDT.dsl, compress and send it Delete Realtek81xx and download/install this: http://www.insanelymac.com/forum/files/file/88-realtekrtl8111-binary/ Link to comment https://www.insanelymac.com/forum/topic/310319-two-boots-before-el-capitan-ok/page/2/#findComment-2206357 Share on other sites More sharing options...
marcoscar Posted January 13, 2016 Author Share Posted January 13, 2016 here my DSDT.dsl compressed this is the DSDT from my OS which has booted from my USB installer.... I can't find any "Realtek81xx" on my computer or USB installer... do you know where I can find to delete it ? I looked in this folders : - EFI at the root of my HD, in Kext - INstaller USB / EFI / CLOVER / Kexts but nothing..... what would you do in my case? I downloaded the new "RealtekRTL8111-Binary".... but I don't know where to put them, and which version (1.2.3 or 2.0.0, debug or release ?) System DSDT.dsl.zip Link to comment https://www.insanelymac.com/forum/topic/310319-two-boots-before-el-capitan-ok/page/2/#findComment-2206363 Share on other sites More sharing options...
marcoscar Posted January 13, 2016 Author Share Posted January 13, 2016 I just réalise that I used my first .plist to boot..... Did I have to use yours, replace mine bu yours on my computer? the second you sent to me? i change it so many Time that i didn't vérify Before booting today... Is that a problème? Link to comment https://www.insanelymac.com/forum/topic/310319-two-boots-before-el-capitan-ok/page/2/#findComment-2206396 Share on other sites More sharing options...
carbo178 Posted January 13, 2016 Share Posted January 13, 2016 For Realtek81xx search in System/Library/Extensions For config.plist wait a moment please, i see the differences Ok, rename my last config.plist in config1.plist, place the file in EFI/CLOVER folder of the USB installer, reboot and choose options, the first voice is Config:config. Change the name in Config:config1 and boot the system Re-extract and send DSDT with MacIasl Link to comment https://www.insanelymac.com/forum/topic/310319-two-boots-before-el-capitan-ok/page/2/#findComment-2206420 Share on other sites More sharing options...
marcoscar Posted January 14, 2016 Author Share Posted January 14, 2016 if I understand... I don't change/rename my .plist on my HD but only on my USB installer.. that's it? do I still have to tick the option "appleintelCPUPM" at the boot option? thanks Link to comment https://www.insanelymac.com/forum/topic/310319-two-boots-before-el-capitan-ok/page/2/#findComment-2206517 Share on other sites More sharing options...
carbo178 Posted January 14, 2016 Share Posted January 14, 2016 I think it's ticked Link to comment https://www.insanelymac.com/forum/topic/310319-two-boots-before-el-capitan-ok/page/2/#findComment-2206521 Share on other sites More sharing options...
marcoscar Posted January 14, 2016 Author Share Posted January 14, 2016 I think it's ticked Notting work tonight... I tried to boot on my usb With yout plist.... No boot.... Black screen .... When i boot from usb , do i chose my disk or the USB installer to make a new installation? Ididnt find any réaltek kext in my library .... Anywhere... What can I do? Sometime i havé the Space thème and some Time i havé the blue and grey one.... Total lost !!! I'm ready to make à clean instal..... But how....? Link to comment https://www.insanelymac.com/forum/topic/310319-two-boots-before-el-capitan-ok/page/2/#findComment-2206763 Share on other sites More sharing options...
carbo178 Posted January 14, 2016 Share Posted January 14, 2016 Ok, you have created new Installer with Clover OS X El Capitan-V7, right? You find the EFI folder in the root of the USB? Link to comment https://www.insanelymac.com/forum/topic/310319-two-boots-before-el-capitan-ok/page/2/#findComment-2206772 Share on other sites More sharing options...
marcoscar Posted January 15, 2016 Author Share Posted January 15, 2016 No, I used the first USB installer I created for my first installation... I don't know which option ticked to create a new one.. do I have to tick the same that I ticked the first time? or others? could you tell me which one? I will send you the option I choosed, you could tell me if they're right, that's ok for you? Thanks Link to comment https://www.insanelymac.com/forum/topic/310319-two-boots-before-el-capitan-ok/page/2/#findComment-2206842 Share on other sites More sharing options...
carbo178 Posted January 15, 2016 Share Posted January 15, 2016 Chris1111 tol is very useful for pendrive creation, it's a vanilla method, only FakeSMC in clover folder and the installer work on 99% of PC's If you have download El Capitan from AppStore you can try this tool (maybe the version V5 is better for you) Link to comment https://www.insanelymac.com/forum/topic/310319-two-boots-before-el-capitan-ok/page/2/#findComment-2206844 Share on other sites More sharing options...
marcoscar Posted January 15, 2016 Author Share Posted January 15, 2016 I Can't find this version in download section? could you give me the link? how does this toll work? how use it? Thks.. Link to comment https://www.insanelymac.com/forum/topic/310319-two-boots-before-el-capitan-ok/page/2/#findComment-2206858 Share on other sites More sharing options...
carbo178 Posted January 15, 2016 Share Posted January 15, 2016 http://www.insanelymac.com/forum/topic/307003-clover-os-x-el-capitan-usb/ You find V5 and V7 in this place Link to comment https://www.insanelymac.com/forum/topic/310319-two-boots-before-el-capitan-ok/page/2/#findComment-2206871 Share on other sites More sharing options...
marcoscar Posted January 15, 2016 Author Share Posted January 15, 2016 ok thanks... that's the same I used to make my first usb installer.... with this option ticked (added to this post), what's do you think about my choice? Link to comment https://www.insanelymac.com/forum/topic/310319-two-boots-before-el-capitan-ok/page/2/#findComment-2206873 Share on other sites More sharing options...
carbo178 Posted January 15, 2016 Share Posted January 15, 2016 Why nvidia low graphics? Link to comment https://www.insanelymac.com/forum/topic/310319-two-boots-before-el-capitan-ok/page/2/#findComment-2206874 Share on other sites More sharing options...
marcoscar Posted January 15, 2016 Author Share Posted January 15, 2016 I gonna be honnest with you..... I don't know why... it's a small card (730 GT)... what would you tick? I'm in relation with private message with Arcade33... and he told me to tick that.... what do you think? would tick the "high" one? Are the other choices good for my hardware? if you could make the list of all the option you would tick... it will be very usefull for me!! Link to comment https://www.insanelymac.com/forum/topic/310319-two-boots-before-el-capitan-ok/page/2/#findComment-2206889 Share on other sites More sharing options...
carbo178 Posted January 15, 2016 Share Posted January 15, 2016 I think the graphics card work without injection, but you can tick the graphic options "on the fly", from the options menu in the Boot screen I think you haven't need other option (for now) Link to comment https://www.insanelymac.com/forum/topic/310319-two-boots-before-el-capitan-ok/page/2/#findComment-2206895 Share on other sites More sharing options...
arcade33 Posted January 15, 2016 Share Posted January 15, 2016 @marcoscar on the first page of your post a part of your config.plist is like that : <key>Graphics</key> <dict> <key>Inject</key> <dict> <key>ATI</key> <false/> <key>Intel</key> <true/> <key>NVidia</key> <false/> for me you don't have injection for your Graphic card it's ok !!!! Link to comment https://www.insanelymac.com/forum/topic/310319-two-boots-before-el-capitan-ok/page/2/#findComment-2206919 Share on other sites More sharing options...
Recommended Posts