carbo178 Posted January 10, 2016 Share Posted January 10, 2016 Try this acpi_dsdt-aml.zip 1 Link to comment Share on other sites More sharing options...
LuisImpreza Posted January 10, 2016 Author Share Posted January 10, 2016 Try this hello friend , first , thank you for helping me with my problem , really, thank you very much , I have tested the DSDT file you sent me , I do not have luck, do not understand why never do anything different to change the DSDT file, chameleon I access the program , and then I check the option of loading the DSDT file and save changes , later repair permissions and rebuild cache , next reboot, but does not restart and shutdown. Always turn off screen but the computer keeps running , illuminated LED , lit fans ... I hope this great community, can help me with my problem , it's harder than I thought ... Thank you very much everyone, I very much appreciate all your work Deputy settings Stock chameleon , because if not missing any option to put I have encountered a problem more besides , seeing all my problems to restart or shut down the system properly , I tried to download the OS X El Capitan to try to fix all these problems and get this message: Could not verify your computer or device. Contact Technical Support for assistance. Capture 4.tiff Capture 5.tiff Capture 6.tiff Capture 7.tiff Capture 8.tiff Capture 9.tiff Capture 10.tiff Capture 11.tiff Link to comment Share on other sites More sharing options...
carbo178 Posted January 10, 2016 Share Posted January 10, 2016 Can you send your Extra folder? You must create a SMBIOS for your hardware using Chameleon wizard, set smbios for iMac11,3 modify your org.chameleon.boot.plist with ethernetbuiltin=Yes, UseKernelcache=Yes kext-dev-mode=1, generatePstates and Cstates=Yes 1 Link to comment Share on other sites More sharing options...
LuisImpreza Posted January 11, 2016 Author Share Posted January 11, 2016 Can you send your Extra folder? You must create a SMBIOS for your hardware using Chameleon wizard, set smbios for iMac11,3 modify your org.chameleon.boot.plist with ethernetbuiltin=Yes, UseKernelcache=Yes kext-dev-mode=1, generatePstates and Cstates=Yes Yes, of course friend. Thank you very much for your help I create SMBios and I modify .plist and write your recommendation , not reboot not power off Extra.zip Link to comment Share on other sites More sharing options...
carbo178 Posted January 11, 2016 Share Posted January 11, 2016 Screen resolution of your display? 1 Link to comment Share on other sites More sharing options...
LuisImpreza Posted January 11, 2016 Author Share Posted January 11, 2016 Screen resolution of your display? 1280 x 1024 friend 1024 x 768 for chameleon, image boot is perfect. Link to comment Share on other sites More sharing options...
carbo178 Posted January 11, 2016 Share Posted January 11, 2016 Ok, try this Extra folder, contains the changes i suggest Extra.zip 1 Link to comment Share on other sites More sharing options...
LuisImpreza Posted January 11, 2016 Author Share Posted January 11, 2016 Ok, try this Extra folder, contains the changes i suggest Thank you very much Friend carbo178 I tested now, two minutes. Regards I Tested new folder extra, but not work, not understand why... :( Link to comment Share on other sites More sharing options...
carbo178 Posted January 11, 2016 Share Posted January 11, 2016 Put this org.chameleon.boot.plist and two SSDT in Extra Reboot Put also this Smbios, delete AppleTyMCEDriver.kext from S/L/E Try also without OC org.chameleon.Boot.plist.zip Archivio.zip SMBios.plist.zip 1 Link to comment Share on other sites More sharing options...
LuisImpreza Posted January 11, 2016 Author Share Posted January 11, 2016 Put this org.chameleon.boot.plist and two SSDT in Extra Reboot Put also this Smbios, delete AppleTyMCEDriver.kext from S/L/E Try also without OC I test now, thank you very very very much!!! Any question, in chameleon load DSDT1 ? DSDT? Thanks friend! Link to comment Share on other sites More sharing options...
carbo178 Posted January 11, 2016 Share Posted January 11, 2016 Chameleon load DSDT.aml and SSDT.aml plus SSDT-1.aml (SSDT's are for processor power management) 1 Link to comment Share on other sites More sharing options...
LuisImpreza Posted January 11, 2016 Author Share Posted January 11, 2016 Chameleon load DSDT.aml and SSDT.aml plus SSDT-1.aml (SSDT's are for processor power management) I test and not lucky for me... I deactivate OC, but not power off not reboot... I do not know what can happen ... on my laptop Asus G74SX works perfect. Thanks for your job friend carbo178 thanks Link to comment Share on other sites More sharing options...
carbo178 Posted January 11, 2016 Share Posted January 11, 2016 X58 mobos are not easy to configure Link to comment Share on other sites More sharing options...
LuisImpreza Posted January 11, 2016 Author Share Posted January 11, 2016 X58 mobos are not easy to configure I am already seeing it ... :( And if used clover solution problem friend carbo178? Link to comment Share on other sites More sharing options...
carbo178 Posted January 11, 2016 Share Posted January 11, 2016 Have you installed NullCPUPM? 1 Link to comment Share on other sites More sharing options...
LuisImpreza Posted January 11, 2016 Author Share Posted January 11, 2016 Have you installed NullCPUPM? NullCPUPM this in the system / Library / Extensions Sorry, updated this post File confirmed this in system / Library / Extensions Link to comment Share on other sites More sharing options...
carbo178 Posted January 11, 2016 Share Posted January 11, 2016 Yes Link to comment Share on other sites More sharing options...
LuisImpreza Posted January 11, 2016 Author Share Posted January 11, 2016 Yes What could I do more companion? Link to comment Share on other sites More sharing options...
carbo178 Posted January 11, 2016 Share Posted January 11, 2016 Without NullCPUPM you can't boot? Try this: Create a new folder named Extensions into /Extra Copy/paste NullCPUPM into the new folder Delete NullCPUPM from S/L/E Reboot If you have a panic during boot, don't worry; reboot with -v -f Link to comment Share on other sites More sharing options...
LuisImpreza Posted January 11, 2016 Author Share Posted January 11, 2016 Without NullCPUPM you can't boot? Try this: Create a new folder named Extensions into /Extra Copy/paste NullCPUPM into the new folder Delete NullCPUPM from S/L/E Reboot If you have a panic during boot, don't worry; reboot with -v -f Ok companion, I try new, two minute friend. Thanks thanks thanks!!! I test, not result .. Not error CPU panic. I send for you my configuration bios real Now, not OC CPU and not OC Ram friend Link to comment Share on other sites More sharing options...
carbo178 Posted January 11, 2016 Share Posted January 11, 2016 Last try: Reset bios to default and post the same screenshot Link to comment Share on other sites More sharing options...
LuisImpreza Posted January 11, 2016 Author Share Posted January 11, 2016 Last try: Reset bios to default and post the same screenshot Done, load system, not problems, not reboot and not power off Link to comment Share on other sites More sharing options...
carbo178 Posted January 11, 2016 Share Posted January 11, 2016 Changes in bios: SATA configuration: AHCI Suspend Mode: S3 Only Reboot Link to comment Share on other sites More sharing options...
LuisImpreza Posted January 11, 2016 Author Share Posted January 11, 2016 Changes in bios: SATA configuration: AHCI Suspend Mode: S3 Only Reboot I test now Friend. Two minutes Changes done, same problem, I power off and reboot and forever screen off computer on... Thanks for your time companion Link to comment Share on other sites More sharing options...
carbo178 Posted January 12, 2016 Share Posted January 12, 2016 I surrender Have you tried with smbios MacPro4,1 ? Link to comment Share on other sites More sharing options...
Recommended Posts