mickeyd453 Posted October 12, 2015 Share Posted October 12, 2015 Hi - I have a silent 9600 GT and its worked flawlessly until 10.11 - In 10.10 and below using Enoch Chameleon its detected by defauly using GraphicsEnabler=Yes. In 10.11 the machine will not boot unless i use the nv_disable=1 flag. In doing this as expected the GFX are laggy and awful but i wonder what it is about this card that 10.11 does not like so much. I understand its an old card but it works so well in 10.10 and below it would be a shame to have to replace it, this box does nothing too strenuous so performance wise its fine. I have tried booting without any flag and also with nvda_drv=1 but all that happens is when it would boot the the desktop the screen goes blank. Any ideas on this at all? thanks Link to comment https://www.insanelymac.com/forum/topic/308638-geforce-9600-gt-512-mb-el-capitan/ Share on other sites More sharing options...
uglyJoe Posted October 12, 2015 Share Posted October 12, 2015 Hi, yesterday I updated my daughters Hackintosh (Zotac ZBoxHD-ND02 with a internal GeForce 9400M) to El Capitan and all is working like with Yosemite. My bootloader is Clover but gfx injection is done inside the DSDT: Device (IXVE) { Name (_ADR, 0x00100000) // _ADR: Address Method (_PRT, 0, NotSerialized) // _PRT: PCI Routing Table { If (PICM) { Return (AR02) } Return (PR02) } Device (IGPU) { Name (_ADR, Zero) // _ADR: Address Name (_SUN, One) // _SUN: Slot User Number Method (_DSM, 4, NotSerialized) // _DSM: Device-Specific Method { If (LEqual (Arg2, Zero)) { Return (Buffer (One) { 0x03 }) } Return (Package (0x22) { "hda-gfx", Buffer (0x0A) { "onboard-1" }, "@0,compatible", Buffer (0x0B) { "NVDA,NVMac" }, "@0,device_type", Buffer (0x08) { "display" }, "@0,name", Buffer (0x0F) { "NVDA,Display-A" }, "@0,can-hot-plug", Buffer (One) { 0x01 }, "@0,connector-type", Buffer (0x04) { 0x00, 0x08, 0x00, 0x00 }, "@1,AAPL,boot-display", Unicode ("\x01"), "@1,compatible", Buffer (0x0B) { "NVDA,NVMac" }, "@1,device_type", Buffer (0x08) { "display" }, "@1,name", Buffer (0x0F) { "NVDA,Display-B" }, "@1,can-hot-plug", Buffer (One) { 0x01 }, "@1,connector-type", Buffer (0x04) { 0x00, 0x08, 0x00, 0x00 }, "device_type", Buffer (0x0C) { "NVDA,Parent" }, "NVCAP", Buffer (0x14) { /* 0000 */ 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x00, /* 0008 */ 0x0C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0A, /* 0010 */ 0x00, 0x00, 0x00, 0x00 }, "model", Buffer (0x15) { "NVIDIA GeForce 9400M" }, "rom-revision", Buffer (0x0F) { "62.79.65.00.00" }, "VRAM,totalsize", Buffer (0x04) { 0x00, 0x00, 0x00, 0x20 } }) } } Device (HDAU) { Name (_ADR, One) // _ADR: Address Method (_DSM, 4, NotSerialized) // _DSM: Device-Specific Method { If (LEqual (Arg2, Zero)) { Return (Buffer (One) { 0x03 }) } Return (Package (0x02) { "hda-gfx", Buffer (0x0A) { "onboard-1" } }) } } } Link to comment https://www.insanelymac.com/forum/topic/308638-geforce-9600-gt-512-mb-el-capitan/#findComment-2176735 Share on other sites More sharing options...
Recommended Posts