marco.pisellonio80 Posted May 5, 2015 Share Posted May 5, 2015 Rileggi il post N° 19, ti dicevo di vedere se è attivata la scheda video (non dovrebbe). Mandami l'intel reg dumper che ti patcho le kext per la scheda video. Link to comment Share on other sites More sharing options...
Rosario98 Posted May 5, 2015 Author Share Posted May 5, 2015 Domani ti invio tutto invece per il wifi? Link to comment Share on other sites More sharing options...
marco.pisellonio80 Posted May 6, 2015 Share Posted May 6, 2015 Per il wifi cerca di risalire all'hardware, anche dalle specifiche del portatile. Male che vada, io ho preso questo su Amazon per 6 euro http://www.dlink.com/it/it/home-solutions/connect/adapters/dwa-131-wireless-n-nano-usb-adapter Link to comment Share on other sites More sharing options...
Rosario98 Posted May 6, 2015 Author Share Posted May 6, 2015 ecco a te DarwinDumper_2.9.8_Chameleon_2.1_X64_ML_Rosario.zip Link to comment Share on other sites More sharing options...
marco.pisellonio80 Posted May 6, 2015 Share Posted May 6, 2015 Non è il Darwindumper che occorre, ma devi; 1) scaricare una live di linux (es. ubuntu) 2) installarla su pendrive e fare il boot da live 3) aprire il terminale di linux e incollare il seguente comando: sudo intel_reg_dumper 4) copiare l'output del terminale e incollarlo su un file di testo, salvarlo in .txt e allegarlo qui. Con quel file si ottengono i parametri in base ai quali patchare la kext video per abilitare l'accelerazione grafica. Link to comment Share on other sites More sharing options...
Rosario98 Posted May 6, 2015 Author Share Posted May 6, 2015 Va bene adesso provo subito Link to comment Share on other sites More sharing options...
Rosario98 Posted May 6, 2015 Author Share Posted May 6, 2015 Ma tramite darwindumper potresti dirmi che kext posso installare per il wifi Link to comment Share on other sites More sharing options...
Rosario98 Posted May 6, 2015 Author Share Posted May 6, 2015 Ecco a te.. Scusami se certe volte capisco male però sai è da poco che mi cimento sul campo hackintosh PGETBL_CTL: 0x00000000 INSTDONE_I965: 0xfffffffe INSTDONE_1: 0x00000000 CPU_VGACNTRL: 0x80000000 (disabled) DIGITAL_PORT_HOTPLUG_CNTRL: 0x00000000 RR_HW_CTL: 0x00000000 (low 0, high 0) FDI_PLL_BIOS_0: 0x00000000 FDI_PLL_BIOS_1: 0x00000000 FDI_PLL_BIOS_2: 0x00000000 DISPLAY_PORT_PLL_BIOS_0: 0x00000000 DISPLAY_PORT_PLL_BIOS_1: 0x00000000 DISPLAY_PORT_PLL_BIOS_2: 0x00000000 FDI_PLL_FREQ_CTL: 0x00000000 PIPEACONF: 0xc0000050 (enabled, active, pf-pd, rotate 0, 6bpc) HTOTAL_A: 0x05d90555 (1366 active, 1498 total) HBLANK_A: 0x05d90555 (1366 start, 1498 end) HSYNC_A: 0x0597057d (1406 start, 1432 end) VTOTAL_A: 0x031102ff (768 active, 786 total) VBLANK_A: 0x031102ff (768 start, 786 end) VSYNC_A: 0x03090303 (772 start, 778 end) VSYNCSHIFT_A: 0x00000000 PIPEASRC: 0x055502ff (1366, 768) PIPEA_DATA_M1: 0x7e25b4e8 (TU 64, val 0x25b4e8 2471144) PIPEA_DATA_N1: 0x00400000 (val 0x400000 4194304) PIPEA_DATA_M2: 0x00000000 (TU 1, val 0x0 0) PIPEA_DATA_N2: 0x00000000 (val 0x0 0) PIPEA_LINK_M1: 0x00021845 (val 0x21845 137285) PIPEA_LINK_N1: 0x00080000 (val 0x80000 524288) PIPEA_LINK_M2: 0x00000000 (val 0x0 0) PIPEA_LINK_N2: 0x00000000 (val 0x0 0) DSPACNTR: 0xd8004400 (enabled) DSPABASE: 0x00000000 DSPASTRIDE: 0x00001600 (88) DSPASURF: 0x0b56e000 DSPATILEOFF: 0x00000000 (0, 0) PIPEBCONF: 0x00000000 (disabled, inactive, pf-pd, rotate 0, 8bpc) HTOTAL_B: 0x00000000 (1 active, 1 total) HBLANK_B: 0x00000000 (1 start, 1 end) HSYNC_B: 0x00000000 (1 start, 1 end) VTOTAL_B: 0x00000000 (1 active, 1 total) VBLANK_B: 0x00000000 (1 start, 1 end) VSYNC_B: 0x00000000 (1 start, 1 end) VSYNCSHIFT_B: 0x00000000 PIPEBSRC: 0x00000000 (1, 1) PIPEB_DATA_M1: 0x00000000 (TU 1, val 0x0 0) PIPEB_DATA_N1: 0x00000000 (val 0x0 0) PIPEB_DATA_M2: 0x00000000 (TU 1, val 0x0 0) PIPEB_DATA_N2: 0x00000000 (val 0x0 0) PIPEB_LINK_M1: 0x00000000 (val 0x0 0) PIPEB_LINK_N1: 0x00000000 (val 0x0 0) PIPEB_LINK_M2: 0x00000000 (val 0x0 0) PIPEB_LINK_N2: 0x00000000 (val 0x0 0) DSPBCNTR: 0x00004000 (disabled) DSPBBASE: 0x00000000 DSPBSTRIDE: 0x00000000 (0) DSPBSURF: 0x00000000 DSPBTILEOFF: 0x00000000 (0, 0) PIPECCONF: 0x00000000 (disabled, inactive, pf-pd, rotate 0, 8bpc) HTOTAL_C: 0x00000000 (1 active, 1 total) HBLANK_C: 0x00000000 (1 start, 1 end) HSYNC_C: 0x00000000 (1 start, 1 end) VTOTAL_C: 0x00000000 (1 active, 1 total) VBLANK_C: 0x00000000 (1 start, 1 end) VSYNC_C: 0x00000000 (1 start, 1 end) VSYNCSHIFT_C: 0x00000000 PIPECSRC: 0x00000000 (1, 1) PIPEC_DATA_M1: 0x00000000 (TU 1, val 0x0 0) PIPEC_DATA_N1: 0x00000000 (val 0x0 0) PIPEC_DATA_M2: 0x00000000 (TU 1, val 0x0 0) PIPEC_DATA_N2: 0x00000000 (val 0x0 0) PIPEC_LINK_M1: 0x00000000 (val 0x0 0) PIPEC_LINK_N1: 0x00000000 (val 0x0 0) PIPEC_LINK_M2: 0x00000000 (val 0x0 0) PIPEC_LINK_N2: 0x00000000 (val 0x0 0) DSPCCNTR: 0x00004000 (disabled) DSPCBASE: 0x00000000 DSPCSTRIDE: 0x00000000 (0) DSPCSURF: 0x00000000 DSPCTILEOFF: 0x00000000 (0, 0) PFA_CTL_1: 0x00000000 (disable, auto_scale yes, auto_scale_cal no, v_filter enable, vadapt disable, mode least, filter_sel programmed,chroma pre-filter disable, vert3tap auto, v_inter_invert field 1) PFA_CTL_2: 0x00007e80 (vscale 0.988281) PFA_CTL_3: 0x00003f40 (vscale initial phase 0.494141) PFA_CTL_4: 0x00007d54 (hscale 0.979126) PFA_WIN_POS: 0x00000000 (0, 0) PFA_WIN_SIZE: 0x00000000 (0, 0) PFB_CTL_1: 0x00000000 (disable, auto_scale yes, auto_scale_cal no, v_filter enable, vadapt disable, mode least, filter_sel programmed,chroma pre-filter disable, vert3tap auto, v_inter_invert field 1) PFB_CTL_2: 0x00007e80 (vscale 0.988281) PFB_CTL_3: 0x00003f40 (vscale initial phase 0.494141) PFB_CTL_4: 0x00007d54 (hscale 0.979126) PFB_WIN_POS: 0x00000000 (0, 0) PFB_WIN_SIZE: 0x00000000 (0, 0) PFC_CTL_1: 0x00000000 (disable, auto_scale yes, auto_scale_cal no, v_filter enable, vadapt disable, mode least, filter_sel programmed,chroma pre-filter disable, vert3tap auto, v_inter_invert field 1) PFC_CTL_2: 0x00007e80 (vscale 0.988281) PFC_CTL_3: 0x00003f40 (vscale initial phase 0.494141) PFC_CTL_4: 0x00007d54 (hscale 0.979126) PFC_WIN_POS: 0x00000000 (0, 0) PFC_WIN_SIZE: 0x00000000 (0, 0) PCH_DREF_CONTROL: 0x00001402 (cpu source disable, ssc_source enable, nonspread_source enable, superspread_source disable, ssc4_mode downspread, ssc1 enable, ssc4 disable) PCH_RAWCLK_FREQ: 0x0000007d (FDL_TP1 timer 0.5us, FDL_TP2 timer 1.5us, freq 125) PCH_DPLL_TMR_CFG: 0x0271186a PCH_SSC4_PARMS: 0x01204860 PCH_SSC4_AUX_PARMS: 0x000029c5 PCH_DPLL_SEL: 0x00000008 (TransA DPLL enable (DPLL A), TransB DPLL disable (DPLL (null))) PCH_DPLL_ANALOG_CTL: 0x00008000 PCH_DPLL_A: 0x88046004 (enable, sdvo high speed no, mode LVDS, p2 Div 14, FPA0 P1 3, FPA1 P1 3, refclk SSC, sdvo/hdmi mul 1) PCH_DPLL_B: 0x04800080 (disable, sdvo high speed no, mode (null), p2 (null), FPA0 P1 8, FPA1 P1 8, refclk default 120Mhz, sdvo/hdmi mul 1) PCH_FPA0: 0x00021007 (n = 2, m1 = 16, m2 = 7) PCH_FPA1: 0x00021007 (n = 2, m1 = 16, m2 = 7) PCH_FPB0: 0x00030d07 (n = 3, m1 = 13, m2 = 7) PCH_FPB1: 0x00030d07 (n = 3, m1 = 13, m2 = 7) TRANS_HTOTAL_A: 0x05d90555 (1366 active, 1498 total) TRANS_HBLANK_A: 0x05d90555 (1366 start, 1498 end) TRANS_HSYNC_A: 0x0597057d (1406 start, 1432 end) TRANS_VTOTAL_A: 0x031102ff (768 active, 786 total) TRANS_VBLANK_A: 0x031102ff (768 start, 786 end) TRANS_VSYNC_A: 0x03090303 (772 start, 778 end) TRANS_VSYNCSHIFT_A: 0x00000000 TRANSA_DATA_M1: 0x00000000 (TU 1, val 0x0 0) TRANSA_DATA_N1: 0x00000000 (val 0x0 0) TRANSA_DATA_M2: 0x00000000 (TU 1, val 0x0 0) TRANSA_DATA_N2: 0x00000000 (val 0x0 0) TRANSA_DP_LINK_M1: 0x00000000 (val 0x0 0) TRANSA_DP_LINK_N1: 0x00000000 (val 0x0 0) TRANSA_DP_LINK_M2: 0x00000000 (val 0x0 0) TRANSA_DP_LINK_N2: 0x00000000 (val 0x0 0) TRANS_HTOTAL_B: 0x00000000 (1 active, 1 total) TRANS_HBLANK_B: 0x00000000 (1 start, 1 end) TRANS_HSYNC_B: 0x00000000 (1 start, 1 end) TRANS_VTOTAL_B: 0x00000000 (1 active, 1 total) TRANS_VBLANK_B: 0x00000000 (1 start, 1 end) TRANS_VSYNC_B: 0x00000000 (1 start, 1 end) TRANS_VSYNCSHIFT_B: 0x00000000 TRANSB_DATA_M1: 0x00000000 (TU 1, val 0x0 0) TRANSB_DATA_N1: 0x00000000 (val 0x0 0) TRANSB_DATA_M2: 0x00000000 (TU 1, val 0x0 0) TRANSB_DATA_N2: 0x00000000 (val 0x0 0) TRANSB_DP_LINK_M1: 0x00000000 (val 0x0 0) TRANSB_DP_LINK_N1: 0x00000000 (val 0x0 0) TRANSB_DP_LINK_M2: 0x00000000 (val 0x0 0) TRANSB_DP_LINK_N2: 0x00000000 (val 0x0 0) TRANS_HTOTAL_C: 0x00000000 (1 active, 1 total) TRANS_HBLANK_C: 0x00000000 (1 start, 1 end) TRANS_HSYNC_C: 0x00000000 (1 start, 1 end) TRANS_VTOTAL_C: 0x00000000 (1 active, 1 total) TRANS_VBLANK_C: 0x00000000 (1 start, 1 end) TRANS_VSYNC_C: 0x00000000 (1 start, 1 end) TRANS_VSYNCSHIFT_C: 0x00000000 TRANSC_DATA_M1: 0x00000000 (TU 1, val 0x0 0) TRANSC_DATA_N1: 0x00000000 (val 0x0 0) TRANSC_DATA_M2: 0x00000000 (TU 1, val 0x0 0) TRANSC_DATA_N2: 0x00000000 (val 0x0 0) TRANSC_DP_LINK_M1: 0x00000000 (val 0x0 0) TRANSC_DP_LINK_N1: 0x00000000 (val 0x0 0) TRANSC_DP_LINK_M2: 0x00000000 (val 0x0 0) TRANSC_DP_LINK_N2: 0x00000000 (val 0x0 0) TRANSACONF: 0xc0000000 (enable, active, progressive) TRANSBCONF: 0x00000000 (disable, inactive, progressive) TRANSCCONF: 0x00000000 (disable, inactive, progressive) FDI_TXA_CTL: 0x80044b00 (enable, train pattern pattern_1, voltage swing 0.4V,pre-emphasis 0dB, port width X1, enhanced framing enable, FDI PLL enable, scrambing enable, master mode disable) FDI_TXB_CTL: 0x00040000 (disable, train pattern pattern_1, voltage swing 0.4V,pre-emphasis 0dB, port width X1, enhanced framing enable, FDI PLL disable, scrambing enable, master mode disable) FDI_TXC_CTL: 0x00040000 (disable, train pattern pattern_1, voltage swing 0.4V,pre-emphasis 0dB, port width X1, enhanced framing enable, FDI PLL disable, scrambing enable, master mode disable) FDI_RXA_CTL: 0x8c022b50 (enable, train pattern not train, port width X1, 6bpc,link_reverse_strap_overwrite no, dmi_link_reverse no, FDI PLL enable,FS ecc enable, FE ecc disable, FS err report enable, FE err report enable,scrambing enable, enhanced framing enable, PCDClk) FDI_RXB_CTL: 0x00000040 (disable, train pattern pattern_1, port width X1, 8bpc,link_reverse_strap_overwrite no, dmi_link_reverse no, FDI PLL disable,FS ecc disable, FE ecc disable, FS err report disable, FE err report disable,scrambing enable, enhanced framing enable, RawClk) FDI_RXC_CTL: 0x00000040 (disable, train pattern pattern_1, port width X1, 8bpc,link_reverse_strap_overwrite no, dmi_link_reverse no, FDI PLL disable,FS ecc disable, FE ecc disable, FS err report disable, FE err report disable,scrambing enable, enhanced framing enable, RawClk) DPAFE_BMFUNC: 0x0001d233 DPAFE_DL_IREFCAL0: 0x00d22bdc DPAFE_DL_IREFCAL1: 0x00d22bdc DPAFE_DP_IREFCAL: 0x80d2218c PCH_DSPCLK_GATE_D: 0x10000000 PCH_DSP_CHICKEN1: 0xa0000000 PCH_DSP_CHICKEN2: 0x00000000 PCH_DSP_CHICKEN3: 0x00000024 FDI_RXA_MISC: 0x00200090 (FDI Delay 144) FDI_RXB_MISC: 0x00200090 (FDI Delay 144) FDI_RXC_MISC: 0x00200090 (FDI Delay 144) FDI_RXA_TUSIZE1: 0x7e000000 FDI_RXA_TUSIZE2: 0x7e000000 FDI_RXB_TUSIZE1: 0x7e000000 FDI_RXB_TUSIZE2: 0x7e000000 FDI_RXC_TUSIZE1: 0x7e000000 FDI_RXC_TUSIZE2: 0x7e000000 FDI_PLL_CTL_1: 0x7e000000 FDI_PLL_CTL_2: 0x7e000000 FDI_RXA_IIR: 0x00000000 FDI_RXA_IMR: 0x000008ff FDI_RXB_IIR: 0x00000000 FDI_RXB_IMR: 0x000008ff PCH_ADPA: 0x00f40000 (disabled, transcoder A, -hsync, -vsync) HDMIB: 0x0000001c (disabled pipe A 8bpc SDVO DVI audio disabled +vsync +hsync detected) HDMIC: 0x00000018 (disabled pipe A 8bpc SDVO DVI audio disabled +vsync +hsync non-detected) HDMID: 0x00000018 (disabled pipe A 8bpc SDVO DVI audio disabled +vsync +hsync non-detected) PCH_LVDS: 0x80300302 (enabled, pipe A, 18 bit, 1 channel) CPU_eDP_A: 0x00000018 PCH_DP_B: 0x00000004 PCH_DP_C: 0x00000000 PCH_DP_D: 0x00000000 TRANS_DP_CTL_A: 0x60000418 (disable port none 6bpc +vsync +hsync) TRANS_DP_CTL_B: 0x60000018 (disable port none 8bpc +vsync +hsync) TRANS_DP_CTL_C: 0x60000018 (disable port none 8bpc +vsync +hsync) BLC_PWM_CPU_CTL2: 0x80000000 (enable 1, pipe A) BLC_PWM_CPU_CTL: 0x00001312 (cycle 4882) BLC_PWM_PCH_CTL1: 0x80000000 (enable 1, override 0, inverted polarity 0) BLC_PWM_PCH_CTL2: 0x13120000 (freq 4882, cycle 0) PCH_PP_STATUS: 0xc0000008 (on, ready, sequencing idle) PCH_PP_CONTROL: 0xabcd0003 (blacklight disabled, power down on reset, panel on) PCH_PP_ON_DELAYS: 0x01901388 PCH_PP_OFF_DELAYS: 0x012c1388 PCH_PP_DIVISOR: 0x00186905 PORT_DBG: 0x00007007 (HW DRRS off) RC6_RESIDENCY_TIME: 0x00793c45 RC6p_RESIDENCY_TIME: 0x01f68030 RC6pp_RESIDENCY_TIME: 0x00111432 FENCE START 0: 0x00000000 FENCE END 0: 0x00000000 FENCE START 1: 0x04a4c001 FENCE END 1: 0x04e6b02b FENCE START 2: 0x0b56e001 FENCE END 2: 0x0b98d02b FENCE START 3: 0x04628001 FENCE END 3: 0x04a4702b FENCE START 4: 0x03de8001 FENCE END 4: 0x0420702b FENCE START 5: 0x00000000 FENCE END 5: 0x00000000 FENCE START 6: 0x00000000 FENCE END 6: 0x00000000 FENCE START 7: 0x00000000 FENCE END 7: 0x00000000 FENCE START 8: 0x00000000 FENCE END 8: 0x00000000 FENCE START 9: 0x00000000 FENCE END 9: 0x00000000 FENCE START 10: 0x00000000 FENCE END 10: 0x00000000 FENCE START 11: 0x00000000 FENCE END 11: 0x00000000 FENCE START 12: 0x00000000 FENCE END 12: 0x00000000 FENCE START 13: 0x00000000 FENCE END 13: 0x00000000 FENCE START 14: 0x00000000 FENCE END 14: 0x00000000 FENCE START 15: 0x00000000 FENCE END 15: 0x00000000 FENCE START 16: 0x00000000 FENCE END 16: 0x00000000 FENCE START 17: 0x00000000 FENCE END 17: 0x00000000 FENCE START 18: 0x00000000 FENCE END 18: 0x00000000 FENCE START 19: 0x00000000 FENCE END 19: 0x00000000 FENCE START 20: 0x00000000 FENCE END 20: 0x00000000 FENCE START 20: 0x00000000 FENCE END 20: 0x00000000 FENCE START 21: 0x00000000 FENCE END 21: 0x00000000 FENCE START 22: 0x00000000 FENCE END 22: 0x00000000 FENCE START 23: 0x00000000 FENCE END 23: 0x00000000 FENCE START 24: 0x00000000 FENCE END 24: 0x00000000 FENCE START 25: 0x00000000 FENCE END 25: 0x00000000 FENCE START 26: 0x00000000 FENCE END 26: 0x00000000 FENCE START 27: 0x00000000 FENCE END 27: 0x00000000 FENCE START 28: 0x00000000 FENCE END 28: 0x00000000 FENCE START 29: 0x00000000 FENCE END 29: 0x00000000 FENCE START 30: 0x00000000 FENCE END 30: 0x00000000 FENCE START 31: 0x00000000 FENCE END 31: 0x00000000 GEN6_RP_CONTROL: 0x00000d92 (enabled) GEN6_RPNSWREQ: 0x28000000 GEN6_RP_DOWN_TIMEOUT: 0x0000c350 GEN6_RP_INTERRUPT_LIMITS: 0x14000000 GEN6_RP_UP_THRESHOLD: 0x00001a90 GEN6_RP_UP_EI: 0x00001f40 GEN6_RP_DOWN_EI: 0x000061a8 GEN6_RP_IDLE_HYSTERSIS: 0x0000000a GEN6_RC_STATE: 0x00000000 GEN6_RC_CONTROL: 0x88060000 GEN6_RC1_WAKE_RATE_LIMIT: 0x03e80000 GEN6_RC6_WAKE_RATE_LIMIT: 0x0028001e GEN6_RC_EVALUATION_INTERVAL: 0x0001e848 GEN6_RC_IDLE_HYSTERSIS: 0x00000019 GEN6_RC_SLEEP: 0x00000000 GEN6_RC1e_THRESHOLD: 0x000003e8 GEN6_RC6_THRESHOLD: 0x0001e848 GEN6_RC_VIDEO_FREQ: 0x00000000 GEN6_PMIER: 0x00000070 GEN6_PMIMR: 0xffffff8f GEN6_PMINTRMSK: 0x0000002a Link to comment Share on other sites More sharing options...
Rosario98 Posted May 7, 2015 Author Share Posted May 7, 2015 Ci sono novità? Link to comment Share on other sites More sharing options...
marco.pisellonio80 Posted May 7, 2015 Share Posted May 7, 2015 Scusa, ma ieri sono stato incasinatissimo. Stasera ritorno a casa alle 10. Se posso stasera, se no te le mando domani. Link to comment Share on other sites More sharing options...
Rosario98 Posted May 7, 2015 Author Share Posted May 7, 2015 Ok grazie invece per la wifi niente? O per la lan? Link to comment Share on other sites More sharing options...
marco.pisellonio80 Posted May 7, 2015 Share Posted May 7, 2015 Per lan e wifi, prova a scaricarti questi due tools: http://www.insanelymac.com/forum/files/download/210-hackintosh-vietnam-ultimate-aio-tool/ http://www.insanelymac.com/forum/files/download/359-macpois0n-yosemite/ C'è una raccolta molto ampia di kext. Se riesci a risalire al modello di lan e wifi è meglio, installi quella per il tuo hardware, altrimenti àrmati di pazienza e pian piano provale tutte: ne installi una, ripari permessi e cache con kext wizard, riavvii, vedi se funziona, se non va cancelli la kext da /sistema/library/extentions, ne installi un'altra, ripari permessi e cache con kext wizard, riavvii, vedi se funziona e così via. Link to comment Share on other sites More sharing options...
Rosario98 Posted May 7, 2015 Author Share Posted May 7, 2015 Ok grazie adesso provo Link to comment Share on other sites More sharing options...
Rosario98 Posted May 7, 2015 Author Share Posted May 7, 2015 Ho installato un kext per l'ethernet però dice che il cavo non è collegato quando invece lo è.. Ho visto se era guasto e invece su Windows funziona perfettamente!! Consigli? Sarà il kext?? Link to comment Share on other sites More sharing options...
Rosario98 Posted May 8, 2015 Author Share Posted May 8, 2015 Ho provato tutti i kext ma nulla da fare ethernet mi compare ma senza successo.. quando dice collegato e provo a navigare non funziona.. invece come va con la scheda video? Link to comment Share on other sites More sharing options...
marco.pisellonio80 Posted May 9, 2015 Share Posted May 9, 2015 forse la lan non è supportata. Prova con il wifi. Per il video, cancella la kext AppleIntelHDGraphicsFB.kext da /sistema/library/extentions, e installa questa allegata, ripari permessi e cache con kext wizard e riavvia. Apri il lettore DVD da applicazioni e in aiuto - mostra caratteristiche supportate se è tutto suppoortato allora la scheda video è ok AppleIntelHDGraphicsFB.kext.zip Link to comment Share on other sites More sharing options...
Rosario98 Posted May 9, 2015 Author Share Posted May 9, 2015 Ho fatto darwin dumper penso che da li puoi vedere?? Link to comment Share on other sites More sharing options...
Rosario98 Posted May 9, 2015 Author Share Posted May 9, 2015 Ho installato il kext che mi hai inviato ma nulla ho provato pure a vedere se potevo registrare lo schermo del mio pc con quick time e dice impossibile completare l'operazione Link to comment Share on other sites More sharing options...
marco.pisellonio80 Posted May 9, 2015 Share Posted May 9, 2015 E sì, perchè non avendo la grafica attivata non ti fa usare quick time. Intanto, questi sono la tua lan e il wifi. LAN: Realtek PCIe FE Family Controller 10/100 (10MBit), WIFI: Atheros AR9485WB-EG Wireless Network Adapter Link to comment Share on other sites More sharing options...
Rosario98 Posted May 9, 2015 Author Share Posted May 9, 2015 Posso installarli? Sono compatibili incaso dove posso prenderli? Link to comment Share on other sites More sharing options...
Rosario98 Posted May 10, 2015 Author Share Posted May 10, 2015 WiFi e Ethernet non compatibili Potete dirmi qualche adattatore wifi usb che potrebbe funzionare ??? 1 Link to comment Share on other sites More sharing options...
marco.pisellonio80 Posted May 10, 2015 Share Posted May 10, 2015 Il dongle wifi l'ho scritto nel post 28 6 euro amazon e va bene, io l'ho preso per il mio fisso. Per la scheda video, la kext dovrebbe andare, ho seguito la guida qui: http://www.insanelymac.com/forum/topic/286092-guide-1st-generation-intel-hd-graphics-qeci/ Ho la tua stessa scheda, strano non ti funzioni la kext. Puoi provare a patcharla da solo, c'è il programmino che fa tutto lui, sempre nella guida. Hai riparato permessi e cache? Link to comment Share on other sites More sharing options...
marco.pisellonio80 Posted May 11, 2015 Share Posted May 11, 2015 Leggendo meglio la guida dice che la grafica si può attivare a partire dalla versione 10.8.5 in poi. PC Requirements:1. OS X Mountain Lion 10.8.5, OS X Mavericks 10.9.x, or OS X Yosemite 10.10.x2. 1st Generation Intel® HD Graphics (Already integrated with 2010 Intel® Arrandale CPUs)3. Internal LCD display uses the LVDS connector4. Intel® HD Graphics QE/CI ZIP file (Click on the image below to download.) Probabilmente è per quello che non ti funziona. Dovresti provare almeno con Mavericks. Link to comment Share on other sites More sharing options...
Rosario98 Posted May 11, 2015 Author Share Posted May 11, 2015 Allora prima provo con il wifi aggiorno e installo quel kext? Link to comment Share on other sites More sharing options...
marco.pisellonio80 Posted May 11, 2015 Share Posted May 11, 2015 Il wifi puoi prenderlo indipendentemente dalla versione che installi, se hai deciso di comprare il dongle esterno. Prova ad aggiornare, ma prima clona la partizione su un HD esterno e installa chameleon su una chiavetta in modo da poter farlo partire da lì in caso non parta. Copia anche la cartella /extra sulla chiavetta e prova a partire da lì prima di fare tutto. Poi quando hai aggiornato prova con questa allegata. AppleIntelHDGraphicsFB.kext.zip Link to comment Share on other sites More sharing options...
Recommended Posts