Jump to content
10 posts in this topic

Recommended Posts

Hi all ! i'm french :wink_anim:

Newly arrived on the forum! I ask for help :)

So to start is my hardware

  •      CPU: I7 4470 Haswell
  •      CM: Asus Maximus VI Formula
  •      RAM: 4GB DDR3 4 X
  •      DD: INTEL SSD 60GB

Screenshot : http://puu.sh/ePPLr/290fc7f998.png

 

 

So I can not go beyond the screenshot !

 

 

thank you for your help :)

Hi and Welcome to InsanelyMac forum!

 

Try configuring your BIOS: http://olarila.com/forum/viewtopic.php?f=28&t=4084

 

And if you want get support in your language (if you have passed in the two initial tests), you can post here: Français

First i install usb with command :

 

sudo /Applications/Install\ OS\ X\ Yosemite.app/Contents/Resources/createinstallmedia --volume /Volumes/Install --applicationpath /Applications/Install\ OS\ X\ Yosemite.app --nointeraction

 

And install Clover Full UEFI mode

 

I use command for boot :

 

kext-dev-mode=1 -v -x GraphicsEnabler=No cpus=1

Some of these boot arguments is for Chameleon...

 

http://clover-wiki.zetam.org/Configuration/Boot#Arguments

 

Like: GraphicsEnabler=Yes/No - Clover use GraphicsInjector: http://www.insanelymac.com/forum/topic/282787-clover-v2-instructions/?p=1853010

Try inject this IGPlatformID: 0c260000

For begin install and gave your Hackintosh works soft i recommend Chameleon.

 

But after you already have your Hackintosh running smoothly, i recommend installing the Clover bootloader, and in your case use UEFI mode.

Hi :)

 

i test chamelon, but it does not create the boot EFI.

 

 

The Boot EFI is empty with "ls -lsa" :/

 

 

bash-3.2# mkdir /Volumes/EFI
bash-3.2# mount_msdos /dev/disk5s1 /Volumes/EFI

 

I have attached the logs in the post .

Chameleon_Installer_Log.txt

×
×
  • Create New...