ufdlim Posted January 4, 2015 Share Posted January 4, 2015 Hello, I'm having issues booting into my installed Yosemite, where it hangs on the black screen/white apple. I am booting into Safe Mode with my installation Clover USB just fine but there are of course limitation with Safe Mode. Of note, I did not have any issues with the installation (did not require Safe Mode) using the standard install config.plist and no DSDT. The DSDT I am using now is one that I self-compiled, although switching to a publicly available one from Tonymacx86 made no difference. I have tried with and without Intel injection that made no difference. I am not able to install Clover because loading of the msdosfs driver is not allowed in Safe Mode. I have attached my DSDT for reference. It is patched with MaciASL with HD3000. I cleaned it up so that it compiles without errors or warnings. Maybe I forgot some essential patches? Attached is my IOReg although I'm not sure how helpful that would be as I am in Safe Mode. CPU: Intel Core i3-2100 Motherboard: GA-H61N-USB3 BIOS: F8 Graphics: Intel HD3000 Thanks! Link to comment https://www.insanelymac.com/forum/topic/303732-yosemite-on-ga-h61n-usb3-with-clover/ Share on other sites More sharing options...
jricks92 Posted February 3, 2015 Share Posted February 3, 2015 Unfortunately the i3-2100 has HD 2000 graphics, not HD 3000. That could be the reason you can only boot up in Safe Mode. I have a Celeron G530 (HD 2000) in one of my hackintoshes that I use for testing. I have to boot in safe mode, otherwise it doesn't boot at all. Also check to make sure that you have rolled back AppleACPIPlatform to the 10.9.5 kext. Hope this helps. Link to comment https://www.insanelymac.com/forum/topic/303732-yosemite-on-ga-h61n-usb3-with-clover/#findComment-2108186 Share on other sites More sharing options...
Recommended Posts