panjunwen Posted November 6, 2014 Share Posted November 6, 2014 Please forgive my bad English。 I have installed yosemite a month ago. My laptop is ASUS X550JD, which hardware is like R510JK or X550JK. It's detail is as below: Cpu: i5 4200H Motherboard: Intel H86m GPU: HD 4600+NV GT820m(block it by dsdt) Sound: CX 20751/2 SSD:PLEXTOR PX-256M6S (256 GB, SATA-III) What I have done: I have read the post about R510JK on TonyMacX86,Edit dsdt and install some .kext so that the Gpu , sound card , USB and other can works well. Now,there are two problems confuse me and I don't know how can I solve them. First, My laptop can't sleep,when I click the 'sleep key ' to sleep, The lcd USB network card and the hard disk will turn off, but the cpu fan always run and after several minutes , the laptop will restart, with a window which says "Sleep Wake Failure".The report I will attach it. I search the console ,get some info:(I'm a chinese) 14/11/6 上午8:40:00.000 kernel[0]: [AGPM Controller] unknownPlatform14/11/6 上午8:40:00.000 kernel[0]: IOPPF: XCPM mode14/11/6 下午4:40:11.000 kernel[0]: XCPM: registered I think the AGPM has some problem ,but i don't know how can i fix it. Secondly,I use the ssdt file which made by ssdtPRGen.sh . When i set the sambas is MBP11,1 or 11,2 , the speedstep include six :8,18,28,30,32,34, There must be some problems. When Clover auto select the smbios MBA 6,2, it only have two speed :800Mhz/2.8Ghz. I hope somebody can help me and I will thanks a lot . My best . Panjunwen. My_Patched_DSDT_SSDT&Sleep_log.zip Link to comment Share on other sites More sharing options...
panjunwen Posted November 7, 2014 Author Share Posted November 7, 2014 Now, I try 10.9 tut the problems are still exist Link to comment Share on other sites More sharing options...
Recommended Posts