venda3 Posted July 10, 2013 Share Posted July 10, 2013 Hi, I have succesfully installed osx to my pc (mobo: asus p9x79 deluxe, but do not need wifi and bt, cpu: intel i7 3930k, gpu: nvidia gx690) but now I do not know how to installe drivers. Everything is working except usb 3.0, audio, have to use cpus=1 without it the os wont boot, and I do not know how to install bootloader, it always does kernel panic (maybe it was something different, installed more things at once). Could any1 help me please? P.s.: the osx is installed on ssd, installed with [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url], or if there is something easier just recommand me Link to comment Share on other sites More sharing options...
Sixkid Posted July 11, 2013 Share Posted July 11, 2013 Hi i've got a asus P9-X79 ( standard ) and clueless where to start , gonna follow this post Link to comment Share on other sites More sharing options...
venda3 Posted July 14, 2013 Author Share Posted July 14, 2013 Hi i've got a asus P9-X79 ( standard ) and clueless where to start , gonna follow this post So, yesterday I finally managed to nearly complete the drivers. for audio download [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] 4.4.1 and choose system utilities and in audio alc8xxhda + applehda rollback + in hdaenabler alc8-- (probably alc898 when you have the same mono) and restart. for cpu download kext beast + voodootscs.kext but you have to edit it (for me i had to change number in IOCPUNumber to 11) here is more: (This is for the i7 CPU the numbers are as followed i3 =3 i5 = 5 i7 With 4 cores and 4 v cores =7 the other one with 6 cores and 6 vcores = 11) however bootloader still does not work, as if it loads only part of kexts Link to comment Share on other sites More sharing options...
Rampage Dev Posted July 14, 2013 Share Posted July 14, 2013 I support all x79 boards via my blog: http://rampagedev.wordpress.com/dsdt-downloads/asus-x79/ Also when you download the DMG just follow the read me and you will be good to go. I would recommend a clean install before installing over what you have as some of the kexts that may have been installed may cause issues. Link to comment Share on other sites More sharing options...
venda3 Posted July 14, 2013 Author Share Posted July 14, 2013 I support all x79 boards via my blog: http://rampagedev.wordpress.com/dsdt-downloads/asus-x79/ Also when you download the DMG just follow the read me and you will be good to go. I would recommend a clean install before installing over what you have as some of the kexts that may have been installed may cause issues. Tried your website as first (because it was the only kext for my mobo) but did not work followed it to the last step but after the [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] it stopped working Link to comment Share on other sites More sharing options...
Rampage Dev Posted July 14, 2013 Share Posted July 14, 2013 Not working as in? Link to comment Share on other sites More sharing options...
venda3 Posted July 14, 2013 Author Share Posted July 14, 2013 Not working as in? it did not boot completely, but like this it is fine, even shut down and restart is working, what else do i need Hi i've got a asus P9-X79 ( standard ) and clueless where to start , gonna follow this post big news about the boot loader, it works, just make sure use the same flags (or modified) as for the installation process (for me I had to use -x -v cpus=1 GraphicsEnabler=No PCIRootUID=0 npci=0x3000 to install it, for correct boot loader I used -x -v cpus=1 GraphicsEnabler=Yes, PCIRootUID=1 npci=0x3000 and restart after boot, after boot without the flags, max with npci=0x3000 and simple edit your chameleon plist) Link to comment Share on other sites More sharing options...
Rampage Dev Posted July 14, 2013 Share Posted July 14, 2013 Did not boot is not a answer... were did it hang? Did you try with the DSDT removed? Link to comment Share on other sites More sharing options...
venda3 Posted July 14, 2013 Author Share Posted July 14, 2013 Did not boot is not a answer... were did it hang? Did you try with the DSDT removed? Honestly, it was 2 months ago, so i really do not know this Link to comment Share on other sites More sharing options...
Sixkid Posted July 16, 2013 Share Posted July 16, 2013 i've got a USB with installation files and tried to install ML What did you do to get past the ' waiting for root device ' ?? in other posts people are talking about adding kext's while in other post i made they said i can do normal install ,which i did but it's hanging on waiting for root device.. big news about the boot loader, it works, just make sure use the same flags (or modified) as for the installation process (for me I had to use -x -v cpus=1 GraphicsEnabler=No PCIRootUID=0 npci=0x3000 to install it, for correct boot loader I used -x -v cpus=1 GraphicsEnabler=Yes, PCIRootUID=1 npci=0x3000 and restart after boot, after boot without the flags, max with npci=0x3000 and simple edit your chameleon plist) Thanks for the info , now explain to this noob how to add those flags and where ... i can see you done this before , this is the first time for me .. Link to comment Share on other sites More sharing options...
Rampage Dev Posted July 17, 2013 Share Posted July 17, 2013 Put the USB in a USB port on he back on the MB and not one connected to a USB header. Also do not use any USB 3.0 ports to install. There is 0 need to add any kext. 1 Link to comment Share on other sites More sharing options...
Sixkid Posted July 17, 2013 Share Posted July 17, 2013 (for me I had to use -x -v cpus=1 GraphicsEnabler=No PCIRootUID=0 npci=0x3000 to install it Finaly found where to add them flags but i got a panic : panic ( cpu 0 caller 0xffffff7f80804269): Unsupported CPU: family = 0x6, model = 0x2d, stepping = 0x7 i have a i7 -3820 4core Link to comment Share on other sites More sharing options...
Rampage Dev Posted July 17, 2013 Share Posted July 17, 2013 Post a pic. Link to comment Share on other sites More sharing options...
Sixkid Posted July 31, 2013 Share Posted July 31, 2013 Link to comment Share on other sites More sharing options...
Sixkid Posted August 28, 2013 Share Posted August 28, 2013 ok have most running now exept audio ,,, you wrote : for audio download [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] 4.4.1 and choose system utilities and in audio alc8xxhda + applehda rollback + in hdaenabler alc8-- (probably alc898 when you have the same mono) and restart in [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] i dont see the hdaenabler alc8-- as for my mobo the standard P9-X79 i need the flag -x -v cpus=1 GraphicsEnabler=Yes npci=0x2000 to make it run Link to comment Share on other sites More sharing options...
Recommended Posts