Jump to content
InsanelyMac Forum
JoB

Iatkos ML2: Instalado pero no inicia.

Recommended Posts

Hola gente del foro.

Mi nombre es Joel y es la primera vez que pruebo esto del hackintosh.

El tema es que pude instalar correctamente la distro Iatkos ML2, pero a la hora de iniciar, inicio con el pendrive, y me pone una pantalla negra, pero el pendrive esta activo, trabajando. Pasa unos minutos y después se reinicia.

Cabe aclarar que trate de iniciar con "-x -v", todo bien, pero pasa lo mismo.

 

Mi hardware:

-Intel E5200

-Gigabyte GA-G31M-ES2C

-WD 320GB

-ATI HD5770

-4GB DDR2

 

Otra cosa es que lo instale con windows 8 previamente instalado, pero lo hice de apurado, ya que en la semana me van a prestar otro HDD, tal vez puedo probar de nuevo. Pero si alguien sabe algo, se lo agradezco.

 

Saludos desde Argentina.

Share this post


Link to post
Share on other sites
Advertisement

no debería tener problemas para dar el boot, la grafica work O.O.B, use esta boot flag: -f -v -x GraphicsEnabler=No npci=0x2000

Share this post


Link to post
Share on other sites

Nada...

Probé con eso y pasa lo mismo.

Será que es un problema de la gráfica? O que no lo instale en partición GUID?

Muchas gracias.

Share this post


Link to post
Share on other sites

boot com esta flag y postea una foto de donde se para, la graphica no es, yo tengo la misma i funciona de default, si tu instalador esta patcheado para instalar en MBR, no deveria tener problemas, pero si no es asi si que tendrá que instalar en guid, usa este instalador es para MBR o GUID.

 

OS X 10.8 Mountain Lion bootable USB

Share this post


Link to post
Share on other sites

Probare de hacer una instalacion limpia, particionando el disco en formato GUID, tal vez se solucione! Que dices?

Saludos!

Share this post


Link to post
Share on other sites

Lamentablemente, hice una instalación en limpio y pasa lo mismo. Formatee todo, teniendo la idea de que se solucione, pero no.

Alguna idea? La verdad que no me quiero desanimar pero no se que puede ser...

Muchas gracias a todos los que me puedan ayudar.

 

Dejo un video:

Share this post


Link to post
Share on other sites

Puede ser la grafica que no levanta, prueba con PCIRootUID=1 (o tambien con 0) junto con GraphicsEnabler=Yes (o No). Saludos.

 

Prueba con esta cadena completa por ejemplo PCIRootUID=1 GraphicsEnabler=Yes UseKernelCache=No -v

Share this post


Link to post
Share on other sites

Bueno si no me equivoco parece que tu controlador de disco es IDE, MIRA EN LA BIOS si tienes la opcion SATA/AHCI, ponga tu bios para default F9, ponga en disable todas la opciones que no uses, tienes que jugar com la config de la bios, prueba esta carpeta Extra, ponga en la Raiz o root, como quieras llamar, de tu disco, y prueba dar el boot, si te passa lo mismo te recomiendo esto: Boot com -s y use estés comandos.

 

 

 

mount /

mkdir kext_backup

cd /System/Library/Extensions

mv ATI* GeForce* NVDA* AppleIntelHD* AppleIntelSNB* AppleIntel*/kext_backup

cd /System/Library/Caches

rm -rf *

shutdown lnk

 

 

 

 

Extra.zip

Share this post


Link to post
Share on other sites

Hola! No tengo la opcion AHCI, ya me fije lamentablemente.

Estoy esperando que me presten otro HDD para instalar de nuevo, y probare con los comandos que me pasaste, que serian para eliminar los kexts de la grafica no?

Sino estaba pensando en pedirle a un amigo una GeForce 9500GT, probar de bootear con ella y luego instalar mi placa, podria funcionar eso?

Saludos y gracias!

Share this post


Link to post
Share on other sites

puede instalar com la GT, cuando tenga el sistema funcionando cambia la gráfica , pero 99% que el problema es com la config de la bios. hay que ir probando configs, desabilita lo que no usas

Share this post


Link to post
Share on other sites

a que te refieres con la bios? como te dije no tengo la opcion para AHCI, luego puse HPET en 64 bits, algo mas tendria que fijarme que me sugieras?

Share this post


Link to post
Share on other sites

puede alguna config, por ejemplo esta asus le ocuria lo mismo, pero se ha solucionado com esto

 

 

visto las ASUS P5Q están dando bastante follón, pero se soluciona con poner en Disabled el Max CPUID Value Limit.

 

 

Reboot SOLUTION!I disabled "VT-d" in my BIOS

 

Attention for all user ..if have problem your pc restart when start with pen drive , edited your org.plist

<key>GraphicsEnabler</key>

<string>Yes</string>

<key>Kernel Flags</key>

<string>-v npci=0x2000</string>

Share this post


Link to post
Share on other sites

Para modificar org.plist tendria que usar una mac? osea, deberia editar ese archivo del bootloader chameleon y luego bootear?

Con respecto a esto: mount /

mkdir kext_backup

cd /System/Library/Extensions

mv ATI* GeForce* NVDA* AppleIntelHD* AppleIntelSNB* AppleIntel*/kext_backup

cd /System/Library/Caches

rm -rf *

shutdown lnk

Eso lo hago booteando con el comando "-s"?

Share this post


Link to post
Share on other sites

Hola, despues de pelearme con iAtkos ml2 durante una semana, lei en un tutorial de instalarlo tal como viene por defecto excepto la opcion de instalar el sonido, asi lo hice y funciono a la primera, despues para solucionar el tema del sonido instale VoodooHDA y ya funciona todo.

 

Espero que esto te siva de algo.

 

Saludos.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.



  • Similar Content

    • By b31k
      Hello
      My system is
      Asus Z170-P Motherboard
      i5 6600K Processor
      NVIDIA GeForce GTX 1050 Ti 4095 MB
      Be-quiet 500W PSU
      Crucial 16 GB 2400 MHz DDR4

      BIOS:

      xHCI Handoff enable
      Serial Port disable
      SATA AHCI mode
      IOAPIC 24-119 Entries (enable y disable) two mode stuck

      I can not build a robust and stable system, The system Sierra is already installed but when I restart or shut down, I get the error Still waiting for root device error, but after too many reboot ( from 2 times to 9) start correctly or other times leave too minutes, with prohibited symbol and finally starts.
      Once started recognised correctly HDD.
      ​Also I tried with a new  EVO860 nvme SSD , but I have the same problem.
       
       
      I dont know because sometimes yes sometimes no, the system stuck in this error
      ​I add some information files and logs.
       
      sudo touch /System/Library/Extensions && sudo kextcache -u /
      kext-dev-mode allowing invalid signature -67030 0xFFFFFFFFFFFEFA2A for kext HackrNVMeFamily-10_12_6.kext
      kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakeSMC.kext
      kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext BrcmPatchRAM2.kext
      kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext BrcmFirmwareRepo.kext
        thank you.


    • By nico3469
      Hey guys
       
      Here is my little guide to install OSX 10.6.8 on the EeePC 1000H.
       
      I'll quote some of the CicciMTS and scenemusic topics, thank you guys.
       
      What is needed ?
       
      A Asus EeePC 1000H
      A 8GB or more USB Pen drive
      An empty hard disk drive
      An other mac or hackintosh
      A USB mouse
      My package of tools, including the latest Apple OS X 10.6.8 Combo update
       
      Restore and Boot from USB
       
      On your mac/hack, go to Disk Utility, find your USB Pen drive, erase it with GUID Partion Table and Mac Extended Format (journaled). Then, restore your iAtkos image on your USB pen drive.
       
      Next, you need to make your USB drive Bootable. Find Chameleon in the tools Folder, open it and install it on your new Snow Leopard USB pen drive.
       
       
      Installation
       
      Boot into BIOS, if available, set the SATA mode to AHCI. If you can't it should work too so don't worry
      Select your USB Pen Drive and boot on it. Chameleon will appear, select your iAtkos install drive, and type -v to boot in verbose mode. After a moment, the OSX installer should appear. Trackpad will not work so plug in a usb mouse. Select your language and click next. on the top of the screen, find disk utilty, and erase your HDD with GUID Partion Table and Mac Extended Format (journaled) options, and close Disk Utility. Click Next until the installer ask you on which drive you want to install OSX. Do not install it yet, click on Customize. Select the following options :
       
      -BOOT
      ASEREBLN

      -BOOT OPTIONS
      32BITS
      GRAPHICS ENABLERS
      ETHERNET BUILTIN
      USB (all)

      -PATCHES
      CREAR EXTRA
      FAKESMC
      DISABLER
      RTC
      KERNEL ATOM
      EVOREBOOT
      SLEEPENABLER
      UUID

      -DRIVERS SATA-IDE
      SATA/AHCI or INTEL SATA/IDE if you didn't enable AHCI in your bios

      -SOUND
      VOODOHDA

      -PS2
      VOODOOPS2 or APPLEPS2

      -POWERMANAGER
      VOODOPOWER

      -LAPTOP HARD
      BATTERY
      CARD READER
      THERMAL ACPI

      -VGA
      INTEL
      EFI STRING
      GMA950 (all)

      -WIFI
      Ralink RT2860

      -WIRED
      ATLANSIC L1E
       
      Click OK and install OSX on your HDD.
       
       
      First Boot and update to 10.6.8
       
      Remove your USB stick from your computer, Chameleon should appear, boot your new OSX installation with -v boot flag. Once you've created your account you should be on your desketop.
      Run the Combo Update installer but do not reboot!! Force Quit out of the installer (hold down the Option key and click and hold over the Installer icon in the Dock. Select Force Quit) and Run the Legacy Kernel installer and then reboot the machine.
      now you should see that your graphics driver doesn't work anymore. Run Kext Utility and let it repair the permissions and update the cache. when it says "all done" drag and drop all the graphics kext into kext utility, and when it says "all done", reboot your computer. Cross your fingers and reboot your computer. You should now have a fully working EeePC 1000H, with graphics, sound, wifi, USB, bluetooth and Ethernet Working with the lastest Snow Leopard update. You can have the latest security updates on your system with Software Update, it will not damage your installation.
       
      Sorry for my bad english, I'm french. Fell free to ask questions if you need, thank you guys
    • By Vengeance1020
      I know the machine and OS X version is old, but its the machine I have and I want to know if I can install iATKOS S3 V2 on the machine?
      My specs are:
       
      A-Bit AG8 (not to be confused with the A-Bit AG8-V)
      2 GB DDR400 RAM (An additional 2GB of DDR400 RAM will be installed soon)
      Intel Pentium 4 3.2GHz (OC to 3.52GHz)
      EVGA GTX 260
      TP-Link TL-WDN4800
      SoundBlaster SB0507
      WDC Blue 1TB
      (A soon to be installed IDE DVD player)
      (A soon to be installed USB 3.0 PCIe card)
       
      System has Windows 8.1 installed and I plan on dual booting (maybe triple boot with linux)
       
      Currently my problem is that I am having issues getting the installer to start, I have used the following flags:
      -v /arch=i386
      -v /arch=i386 /legacy
      -v /arch=i386 /legacy /graphicsenabler=yes
      all have the same result: a reboot just before the apple logo would normally show up, after all the kexts are loaded by chameleon, the system will just reboot. What do I need to do?
    • By alex95sv
      Hey, so I just installed Sierra using the iAtkos SR and everything works except my Graphics... It shows that I have only 5MB Video memory.. My card is AMD Radeon R9 270.
       
      Tried different stuff when installing, like different framebuffers like Hamachi, Futomaki, Dayman, but nothing seems to be working. Tried installing extra stuff with a "AMD Radeon GPU Injector Tool" but nothing worked.
      The weird thing is, everything worked flawlessly on Yosemite. I even updated without problems via the AppStore, and I never did anything special for my graphics back then as far as I remember. I was running a pretty stable hackintosh on Yosemite (It was iAtkos too), but wanted to upgrade.
       
      Has someone with the same graphics card encountered this issue, and fixed it?
       
      Thank you in advance!
    • By malkabani
      Hi
       
      I have my laptop, which it is dell Inspiron 3521. So is there any guide on how to install mac os 10.12 on my laptop dell 3521, because I try to install by making standard USB installation but not work.
       
      Can anyone help me, please? Thanks
×