kuruu Posted January 22, 2013 Share Posted January 22, 2013 Hi, I have been running a p5w off of a 2tb seagate for a while and have just needed to upgrade to a 3tb, a seagate as well. i was using chameleon to boot. i cannot get any bootloader to boot off the 3tb disk. i have tried all the installers and installing manually with the same result. boot0 error. The workaround is to install chameleon on a usb stick. Any got any ideas of things to try to get this working again? Thanks! Link to comment https://www.insanelymac.com/forum/topic/285832-boot0-error-with-3tb-seagate/ Share on other sites More sharing options...
kuruu Posted January 22, 2013 Author Share Posted January 22, 2013 solved this by unmounting the disk and doing dd if=boot1h of=/dev/rdisk0s2 bs=4096 with chameleon. I also marked the partition as active, not sure if that was necessary. The difference was I had not used the bs=4096 option. Link to comment https://www.insanelymac.com/forum/topic/285832-boot0-error-with-3tb-seagate/#findComment-1882796 Share on other sites More sharing options...
Recommended Posts