Jump to content
Welcome to InsanelyMac Forum

Register now to gain access to all of our features. Once registered and logged in, you will be able to contribute to this site by submitting your own content or replying to existing content. You'll be able to customize your profile, receive reputation points as a reward for submitting content, while also communicating with other members via your own private inbox, plus much more! This message will be removed once you have signed in.

Sign in to follow this  

[AIUTO] Installazione mountain lion su Sony VAIO VPCEA1S1E

2 posts in this topic

Recommended Posts

Salve a tutti!

Dopo un sacco di tempo che non scrivo, rieccomi a porvi un altro quesito.

Ho il notebook in titolo, e vorrei installare mountain lion; Seguendo guide di portatili simili, sono riuscito ad ottenere un USB con bootloader Chameleon (tramite kakewalk e successivamente installato Chameleon) e sistema operativo, ma non riesco a schiodarmi dalla schermata della mela; nel senso che, avviando in -v, ciò che ottengo è un riavvio... qual'è il problema?

Allego il report di everest.


Share this post

Link to post
Share on other sites
You are commenting as a guest. If you have an account, please sign in.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoticons maximum are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By hornpipe2
      I have a Mac Mini 2006 (upgraded) with Intel GMA950 graphics, running MLPostFactor 10.8.5.  It is connected to an ASUS VS197 LCD panel using DVI-D.  This is natively a 1366x768 panel that is recognized and works fine.
      However, the other choices for resolution are 4:3 800x600 and 1024x768, and then the oddballs 832x624 and 1360x768.  None of these are useful as a low-resolution widescreen for gaming or watching DVD content.  Specifically I want to get access to 848x480 or 854x480, and also 1024x576.  SwitchResX makes these choices available, but it doesn't work with a "full screen" game, presumably because the game directly queries OSX Display to get a list of valid resolutions and SwitchResX is bypassing that system instead.
      So the solution is obvious: buy a new computer pull the monitor's EDID data, hack it to enable new resolutions, and then tell OSX to use this custom EDID instead of the one retrieved from the monitor.
      Following the steps of the EDID injection guide, here is where I am:
      * Retrieve EDID, DisplayVendorID etc from ioreg.
      00 FF FF FF FF FF FF 00 04 69 F2 19 24 94 00 00 31 16 01 03 80 29 17 78 EA F5 45 A4 55 50 9E 27 0F 50 54 BD EE 00 81 C0 01 01 01 01 01 01 01 01 01 01 01 01 01 01 66 21 56 AA 51 00 1E 30 46 8F 33 00 9A E6 10 00 00 1E 00 00 00 FD 00 32 4B 18 53 11 00 0A 20 20 20 20 20 20 00 00 00 FC 00 41 53 55 53 20 56 53 31 39 37 0A 20 20 00 00 00 FF 00 43 43 4C 4D 54 46 30 33 37 39 32 34 0A 00 F1 * Use an EDID editor to enable new 848x477 and 1024x576 resolutions.  (Verify with an online EDID tool, and compare to the previous version)
      00 FF FF FF FF FF FF 00 04 69 F2 19 24 94 00 00 31 16 01 03 80 29 17 78 EA F5 45 A4 55 50 9E 27 0F 50 54 BD EE 00 81 C0 4B C0 4B CA 4B CF 61 C0 61 CA 61 CF 01 01 66 21 56 AA 51 00 1E 30 46 8F 33 00 9A E6 10 00 00 1E 00 00 00 FD 00 32 4B 18 53 11 00 0A 20 20 20 20 20 20 00 00 00 FC 00 41 53 55 53 20 56 53 31 39 37 0A 20 20 00 00 00 FF 00 43 43 4C 4D 54 46 30 33 37 39 32 34 0A 00 47 * Create a new subfolder and plist within /System/Library/Overrides/Display/ containing the new EDID string and monitor name.
      * Reboot.
      Now the problems begin.  Even though the plist file is being read (which I know because the Monitor Name has changed in Displays), the custom EDID is not being used.  When I dig into IORegExplorer I am able to come up with AAPL00,EDID string and it is the unmodified one read from the monitor.  I even tried a plug-and-unplug while OSX is running, and also tried to reset the SMC and NVRAM, but no dice.
      Do I need to start digging into DSDT hacking?  Is the Intel driver pulling down EDID during boot and I need to override it somewhere else?  What am I missing here?
    • By FMAranda
      Hi everyone!
      I have a Sony Vaio Fit15E running macOS 10.12.5 with almost everything working. The only problem is that, when it wakes up from sleep (hibernatemode 3), the screen's backlight doesn't light up. In order to make it work, I have to close and open the lid one more time. After that, the backlight lights up just fine.
      The backlight worked fine until Yosemite, if i recall. I've tried a zillion methods, including some old GMA950 topics about that issue and also messed with all those darkwake options.
      I've attached my DSDT. It has the following patches: GFX0 -> IGPU, HDA Layout ID 3, Remapping Q8E and Q8F keys (for brightness keys) and Sony Vaio SVE Battery Patch.
      For brightness, I'm using the new method with separate SSDT_PNLF.aml. Brightness slider works fine.
      Also, I have the follwing kexts at Clover's other kext folder: ACPIBatteryManager.kext, CodecCommander.kext (HDA sound after sleep), FakePCIID_XHCIMux.kext, FakePCIID.kext, USBInjectAll.kext (without these three, I can't get my built-in webcam and RT2870 usb wifi to work), FakeSMC.kext, RealtekRTL8111.kext and VoodooPS2Controller.kext.
      On System/Library/Extensions, I have: AppleHDA.kext (patched with HDA-Patcher) and RT2870USBWirelessDriver.kext.
      As boot flags, I have: npci=0x2000, dart=0 and slide=100 (with this flag, hibernatemode 25 'full hibernate' works).
      I'm really creating this topic because I don't know what else I can do. I have years of hackintosh (since Tiger, not on this same hardware, lol), but I can't find a solution for this particular issue.
      Thanks you all.
    • By a3om
      Hi, guys!
      I would like to say you all thanks for your time. I saw how much help you give to people like me. I respect you guys!
      So, my issue. I have a Sony VAIO VPC-F13S1R that has the NVIDIA 425m video card and FullHD resolution. I have red many topics and tried many options which work with any other laptops, but nothing. Now I am on the 6,2 SMBios. I also tried to use the 3,1. Internal display works with the nv_disable, but has no full hd resolution. But I would like to have that.
      How can I get it working? Any ideas? Also, if I can't get NVIDIA working, may I use the integrated Intel HD Graphics video card that my VAIO have as well? Will it support FullHD resolution?  Seems it doesn't support Full HD resolution, so the only one way to have Full HD is to get the NVIDIA working...
      I also thought, maybe Clover don't load the patched DSDT.aml... How can I check this?
      Notebook: Sony VAIO VPC-F13S1R
      Graphics Adapter: NVIDIA GeForce GT 425m (max amount of memory: 1024MB)
      Display: LCD 16' FullHD (1920x1080)
      CPU: Intel Core i5 m560
      Chipset: PM55
      BIOS: AMI R0180Y9
      Boot loader: Clover
      OS: Mac OS X El Capitan 10.11.6 15G31
      DSDT: in the attached archive
      Clover Configuration: in the attached archive
      Thanks a lot for your help!
      My Configuration.zip
    • By DaniiSwan
      I've been attempting for the past few days to install OS X Mountain Lion on my Lenovo Thinkpad Edge E530 with little success. So much so that I've finally decided I'm probably out of ideas and created this forum post requesting help.
      My Laptop Specs are:
      Intel Core i3-2328m (Sandy Bridge CPU at 2.2GHZ with support for SSE2 , SSE3 and SSSE3)
      8GB RAM
      500GB Hitachi Z7K500 HDD
      Lenovo 627226G Motherboard (Intel HM77 Chipset)
      Intel HD Graphics 3000
      More Detailed Specs ---> https://drive.google.com/open?id=0B-GXUa1I8xyDZU1SdklDSlhER2c
      So far , I've attempted to install iAtkos ML2 and ML3U via USB and so far both have worked up until the first sighting of the apple logo then the laptop restarted. In both cases , I was using a separate USB with chameleon bootloader on but in the instance where I tried to use the onboard bootloader on ML3U , I hit enter and the screen simply remained black.
      Any help would be much appreciated
      Thank you for your time.